- 23 10月, 2015 40 次提交
-
-
由 Thomas Chou 提交于
Convert altera_spi to driver model Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NJagan Teki <jteki@openedev.com>
-
由 Thomas Chou 提交于
Convert altera_uart to driver model. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
Convert altera_jtag_uart to driver model. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMarek Vasut <marex@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Thomas Chou 提交于
Add ioremap() to map physical address to uncached virtual address. We need this to convert the reg address from the device tree. The order of headers inclusion in interrupts.c is changed because common.h will include board header that contains IO_REGION_BASE. In the future, the IO_REGION_BASE should be decided from the device tree. tree Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMarek Vasut <marex@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Thomas Chou 提交于
Enable malloc() pool before relocation, because this is needed to use serial uclass. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
We will need CONFIG_SYS_MALLOC_F_LEN to use serial uclass. So we shall undefine CONFIG_SYS_GENERIC_GLOBAL_DATA, and call board_init_f_mem() to allocates early malloc() memory with size of CONFIG_SYS_MALLOC_F_LEN in board_f.c. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
There is a weak version_string[] at common/cmd_version.c . Remove the one in start.S. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
The dly_clks() in start.S is no use after switching to generic timer. Remove it. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
Move the timer code from interrupts.c into timer.c . Eliminate the installation of timer interrupt handler, which is no longer used. Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
由 Thomas Chou 提交于
Zap almost all of the ad-hoc timer code from interrupts.c and use the code in lib/time.c instead. Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
由 Thomas Chou 提交于
Enable the Driver Model config. The driver subsystems are not enabled until we enable each of them. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
This patch adds device tree control of U-Boot to nios2 boards. The example dts is taken from Linux kernel. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
Since commit 44c6e659 "rename _end to __bss_end__" , the _end was removed. But we need it now for separated device tree control, ie, CONFIG_OF_SEPARATE . The _end is used by fdtdec_setup() to find the blob. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMarek Vasut <marex@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Thomas Chou 提交于
Since we don't use gp for small data with option "-G0", we use gp as global data pointer. The _gp location is not needed. The ALIGN(16) was for gp only. It is removed, so that we can get correct address of dtb in u-boot-dtb.bin image. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
As we will use u-boot-dtb.bin, the code relocation range should be adjusted to accommodate the additional dtb. It might be overkilled to look into dtb header to find the dtb size, so we will simply use CONFIG_SYS_MONITOR_LEN. Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
由 Thomas Chou 提交于
As dtb in u-boot-dtb.bin overlapped the BSS section, we should delay the clearing of BSS until dtb is relocated in board_init_f(). Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
As altera_pio_init() uses BSS, it should be moved to board_early_init_r(). Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
Enable this in the Kconfig so that nios2 boards can use device tree to configure U-Boot. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
Enable CONFIG_NET_RANDOM_ETHADDR to generate a random MAC address when ETHADDR is not set. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Cc: Joe Hershberger <joe.hershberger@ni.com>
-
由 Thomas Chou 提交于
This patch moves command line configuration from board header file to board defconfig in the way of Kconfig. The change passed savedefconfig. This fixes warnings such as : "CONFIG_SYS_HUSH_PARSER" redefined, when "Use hush shell" is selected with menuconfig, etc. Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
由 Mugunthan V N 提交于
Currently omap_hsmmc driver doesn't use sdcd pin to detect whether the card is present or not. Instead the same pin is used as GPIO to detect card presence. So change the pin mux mode from mmc0_sdcd to gpio0_6. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
With DM_GPIO, gpio parameters like ACTIVE_(LOW/HIGH) are to be parsed in xlate gpio drivers-ops. Since xlate is not implemented in omap_gpio driver, the driver considers all gpio to be ACTIVE_HIGH which is the default case and fails to return actual gpio status for ACTIVE_LOW gpios. So adding .xlate ops to omap_gpio. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Mugunthan V N 提交于
Import various DT files for am57xx-beagle-x15 from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
由 Mugunthan V N 提交于
Since spl doesn't support DM currently, do not define DM_MMC for spl build. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> asdfsadf
-
由 Mugunthan V N 提交于
Import various DT files for am437x-sk-evm from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Mugunthan V N 提交于
Import various DT files for am4372, an43xx pinctrl and am437x-gp-evm from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Mugunthan V N 提交于
Since spl doesn't support DM currently, do not define DM_MMC for spl build. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
由 Mugunthan V N 提交于
Tested on am437x gp evm and am437x sk evm Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
由 Mugunthan V N 提交于
Adding compatibles for am335x, am437x and dra7 platforms. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Mugunthan V N 提交于
In some platforms like am437x, serial node is not populated with clock-frequency node. So in that case have a default clock-clock frequency. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Mugunthan V N 提交于
enable mmc driver model for am335x gp_evm as omap_hsmmc supports driver model Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
enable mmc driver model for am335x bbb as omap_hsmmc supports driver model Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
adopt omap_hsmmc driver to device driver model Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
由 Mugunthan V N 提交于
Since spl doesn't support DM currently, do not define DM_MMC for spl build. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
Existing driver gets the actual omap hammc base address + 0x100 bytes as the first 0x100 bytes is not used by the driver. But with DM conversion the base address from DT is different, to accommodate the offset adding res0[0x100] to struct hsmmc. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
Import various DT files for dra7-evm from Linux Kernel v4.2 Add config file for this board, enable DM and DM_GPIO Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Add config file for k2g Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NVitaly Andrianov <vitalya@ti.com>
-
由 Lokesh Vutla 提交于
Add basic DT support for k2g evm. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Lokesh Vutla 提交于
GPIO1_9 controls SPI flash on k2g evm. So make GPIO1_9 as output pin, inorder to use SPI. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Roger Quadros 提交于
Add MMC support for k2g Signed-off-by: NRoger Quadros <rogerq@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Tested-by: NMugunthan V N <mugunthanvnm@ti.com>
-