- 15 10月, 2019 18 次提交
-
-
由 Simon Glass 提交于
Remove this file from git and instead build it using the Makefile. With this change a few things need to be adjusted: 1. The 'notes' section no-longer appears at the start of the ELF file (before the code), so update testSymbols to adjust the offsets. 2. The dynamic linker is disabled to avoid errors like: "Not enough room for program headers, try linking with -N" 3. The interpreter note is moved to the end of the image, so that the binman symbols appear first. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Remove this file from git and instead build it using the Makefile. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Remove this file from git and instead build it using the Makefile. Update tools.GetInputFilename() to support reading files from an absolute path, so that we can read the Elf test files easily. Also make sure that the temp directory is report in ELF tests as this was commented out. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the ELF test files are checked into the U-Boot tree. This is covenient since the files never change and can be used on non-x86 platforms. However it is not good practice to check in binaries and in this case it does not seem essential. Update the binman test-file Makefile to support having source in a different directory. Adjust binman to run it to build bss_data, as a start. We can add other files as needed. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present this command silently fails if something goes wrong. Use the tools.Run() function instead, since it reports errors. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present this entry does not work correctly when a FIT image is used as the input. It updates the FIT instead of the output image. The test passed because the FIT image happened to have the right data already. Fix it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
A Firmware Image Table (FIT) is a data structure defined by Intel which contains information about various things needed by the SoC, such as microcode. Add support for this entry as well as the pointer to it. The contents of FIT are fixed at present. Future work is needed to support adding microcode, etc. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present these two sections of code are linked together into a single 2KB chunk in a single file. Some Intel SoCs like to have a FIT (Firmware Interface Table) in the ROM and the pointer for this needs to go at 0xffffffc0 which is in the middle of these two sections. Make use of the new 'reset' entry and change the existing 16-bit entry to include just the 16-bit data. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present binman has a single entry type for the 16-bit code code needed to start up an x86 processor. This entry is intended to include both the reset vector itself as well as the code to move to 32-bit mode. However this is not very flexible since in some cases other data needs to be included at the top of the SPI flash, in between these two pieces. For example Intel requires that a FIT (Firmware Image Table) pointer be placed 0x40 bytes before the end of the ROM. To deal with this, add a new reset entry for just the reset vector. A subsequent change will adjust the existing 'start16' entry. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the Intel IFWI entry uses 'replace' without the 'ifwi-' prefix. This is a fairly generic name which might conflict with the main Entry base class at some point, if more features are added. Add a prefix. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Some versions of binutils generate hidden symbols which are currently not parsed by binman. Correct this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Recent versions of binutils add a '.note.gnu.property' into the ELF file. This is not required and interferes with the expected output. Drop it. Also fix testMakeElf() to use a different file for input and output. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present if libfdt is not available binman can't do anything much. Improve the situation a little. Ideally there should be a test to cover this, but I'm not quite sure how to fake this. Signed-off-by: NSimon Glass <sjg@chromium.org> (fixed up missing ReadChildData() enty test)
-
由 Simon Glass 提交于
It is more common to use the name 'cls' for the class object of a class method, to distinguish it from normal methods, which use 'self' Update the binman tests accordingly. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present tools are not expected to fail. If they do an exception is raised but there is no detail about what went wrong. This makes it hard to debug if something does actually go wrong. Fix this by outputting both stderr and stdout on failure. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Since cros_subprocess use bytestrings now, this feature not needed. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-imx由 Tom Rini 提交于
u-boot-imx-20191014 ------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628 - logicpd pinmux - i.MX7ULP: imx_ddr_size - fixes Toradex i.MX6/i.MX7 - pico-imx7d - tpc70 converted to DM - New Board: meerkat96 - add HAB version command - i.MX8 : imx8: Jump from alias to OCRAM address at SPL init imx8qm/qxp: Set SPL TEXT base to OCRAM base
-
- 14 10月, 2019 22 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-video由 Tom Rini 提交于
- panel bridge support in stm32 ltdc - DSI host uclass - sandbox DSI host uclass test driver and DSI host test - MIPI DSI helpers - Synopsys Designware MIPI DSI host bridge driver - STM32 DSI controller driver - OTM800A and RM68200 panel support - DSI host updates for stm32f769 and stm32mp1 dtsi files - splash screen for stm32f769 and stm32mp1 boards - stm32 defconfig updates for display support
-
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc由 Tom Rini 提交于
- Add sdhci driver for Broadcom iProc platform - Add a driver callback for power-cycle for mmc - Implement host_power_cycle callback for stm32_sdmmc2 - spl: dm_mmc: Initialize only the required mmc device
-
由 Peng Fan 提交于
The controller needs two clk, per clk and ipg clk, so let's add ipg clk. Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Sjoerd Simons 提交于
THe RVT data includes a major and minor version in its header parameter. Add a new command to print this out. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
-
由 Peng Fan 提交于
Add board_mmc_get_env_dev to correctly return devno for mmc env Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Fabio Estevam 提交于
Use imx_ddr_size() to retrieve the total DDR size instead of passing a hardcoded memory size. imx_ddr_size() calculates the memory size based on the actual MMDC registers values and is useful to detect misconfigurations, so switch to this more robust approach. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
由 Fabio Estevam 提交于
i.MX7ULP uses the same MMDC controller IP as found on i.MX53 and i.MX6, so build mmdc_size.c for i.MX7ULP as well. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
由 Fabio Estevam 提交于
The original imx_ddr_size() implementation had some issues reported by checkpatch like this: CHECK: Prefer kernel type 'u32' over 'uint32_t' #127: FILE: arch/arm/mach-imx/mmdc_size.c:16: + uint32_t ctl; WARNING: Prefer 'unsigned int' to bare use of 'unsigned' #151: FILE: arch/arm/mach-imx/mmdc_size.c:40: + unsigned ctl = readl(&mem->ctl); Fix all of them. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
由 Fabio Estevam 提交于
Place imx_ddr_size() into a separate file. The motivation for doing this is to be able to easily reuse imx_ddr_size() on i.MX7ULP. Currently imx_ddr_size() is inside arch/arm/mach-imx/cpu.c, which is not built for i.MX7ULP. Changing the logic to allow building cpu.c for i.MX7UP would require adding several ifdef's, leading to a not a very elegant solution. To allow better reuse, just place imx_ddr_size() into a common mmdc_size.c file. Signed-off-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Yannick Fertré 提交于
Add support of panels otm8009A, RM68200 & DSI controller. Limit resolution to 1280x800. Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Yannick Fertré 提交于
Update video configs to support bitmap 16bpp, 24bpp, 32bpp & RLE8. Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Yannick Fertré 提交于
The new class dsi host allows the management of the bridge DPI to DSI. This bridge is embedded in the chipset mp1 (come from synopsys company). Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Yannick Fertré 提交于
The new class dsi host allows the management of the bridge DPI to DSI. This bridge is embedded in the chipset mp1 (come from synopsys company). Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Yannick Fertré 提交于
Enable the display controller, mipi dsi bridge & panel. Set panel display timings. Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Yannick Fertré 提交于
Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Yannick Fertré 提交于
Support for Raydium RM68200 720p dsi 2dl video mode panel. This rm68200 panel driver is based on the Linux Kernel driver from drivers/gpu/drm/panel/panel-raydium-rm68200.c. Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Yannick Fertré 提交于
Support for Orise Tech otm8009a 480p dsi 2dl video mode panel. Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Yannick Fertré 提交于
Add the STM32 DSI controller driver that uses the Synopsys DesignWare MIPI DSI host controller bridge. Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Yannick Fertré 提交于
Add a Synopsys Designware MIPI DSI host bridge driver, based on the Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs. Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Yannick Fertré 提交于
Display Serial Interface (DSI) host can usefully be modelled as their own uclass. DSI defines a serial bus and a communication protocol between the host and the device (panel, bridge). Signed-off-by: NYannick Fertré <yannick.fertre@st.com>
-
由 Shyam Saini 提交于
This also enables mtd configs which are required by nandbcb command. This command would be used to configure boot control block(BCB) while writing spl image on nand device. Signed-off-by: NShyam Saini <shyam.saini@amarulasolutions.com>
-
由 Igor Opaniuk 提交于
Implementation of pmic_get() uses uclass_find_device_by_name(), which behaviour was changed in 4213609c ("drivers: core: use strcmp when find device by name"). Now we have to supply full node name with unit address. Fixes boot issue: U-Boot 2019.07-00788-g0ef6e69a1e-dirty (Jul 19 2019 - 15:27:02 +0300) CPU: Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 41C Reset cause: POR DRAM: 512 MiB initcall sequence 9ffd3a4c failed at call 87803c61 (err=-19) ERROR Please RESET the board Fixes: 4213609c("drivers: core: use strcmp when find device by name") Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com>
-