- 26 7月, 2011 40 次提交
-
-
由 Mike Frysinger 提交于
I can't see any obvious needs for the default environment to be writable, so make it const. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
For people who want to manually extract the embedded environment so that it can be manually packed into the final u-boot image, add a config opt to force building of the envcrc tool. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Newer SST flashes have dropped the Auto Address Increment (AAI) word programming (WP) modes in favor of the standard page programming mode that most flashes now support. So add a flags field to the different flashes to support both modes with new and old styles. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Every spi flash uses the same write disable command, so unify this in the common code. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Fixed commit message. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Mike Frysinger 提交于
These defines are used in only one place, so just inline them. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Now that the common spi_flash structure tracks all the info that these drivers need, kill off their local state indirection and use just what the common code provides. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Once we add a new page_size field for write lengths, we can unify the write methods for most of the spi flash drivers. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Every spi flash uses the same write enable command, so unify this in the common code. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Convert all the comments at the top of the file into help text for people to easily get at with standard -h/--help options. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NDetlev Zundel <dzu@denx.de>
-
由 Graeme Russ 提交于
In some circumstances, reset_timer_masked() was called be timer_init() in order to perform architecture specific timer initialisation. In such cases, the required code in reset_timer_masked() has been moved into timer_init()
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
-
由 Graeme Russ 提交于
There is no need to use set_timer(). Replace with appropriate use of get_timer() Signed-off-by: NGraeme Russ <graeme.russ@gmail.com> Acked-by: NWolfgang Denk <wd@denx.de>
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-
由 Aneesh V 提交于
replace all occurences of CONFIG_PRELOADER with CONFIG_SPL_BUILD Signed-off-by: NAneesh V <aneesh@ti.com>
-
由 Aneesh V 提交于
Signed-off-by: NAneesh V <aneesh@ti.com>
-
由 Aneesh V 提交于
Signed-off-by: NAneesh V <aneesh@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-
由 Daniel Schwierzeck 提交于
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-
由 Jens Scharsig 提交于
* Fix: if using md5 command watchdog timed out * change function call md5(..) to the watchdog-safe variant md5_wd(..) to support watchdog reset Signed-off-by: NJens Scharsig <esw@bus-elektronik.de>
-
由 Jens Scharsig 提交于
* Fix: if using sha1 command watchdog timed out * change function call sha1_csum(..) to the watchdog-safe variant sha1_csum_wd(..) to support watchdog reset Signed-off-by: NJens Scharsig <esw@bus-elektronik.de>
-
由 Matthew McClintock 提交于
It might be desirable to have the ability to flush icache/dcache within u-boot, this patch gives each arch the ability to provide a flush_dcache/flush_icache function to let u-boot flush caches from the prompt Signed-off-by: NMatthew McClintock <msm@freescale.com>
-
由 Matthew McClintock 提交于
Print a message if we do not have the ability to uncompress a gzip image. Before, u-boot would just assume the routines were available Signed-off-by: NMatthew McClintock <msm@freescale.com>
-
由 Matthew McClintock 提交于
If we don't want to build support for any partition types we can now add #undef CONFIG_PARTITIONS in a board config file to keep this from being compiled in. Otherwise boards assume this is compiled in by default Signed-off-by: NMatthew McClintock <msm@freescale.com>
-
由 Laurence Withers 提交于
In miiphy_register() the new device's name was initialised by passing a string parameter as the format string to sprintf(). As this would cause problems if it ever contained a '%' symbol, switch to using strncpy() instead. Signed-off-by: NLaurence Withers <lwithers@guralp.com> Cc: Andy Fleming <afleming@freescale.com>
-
由 Kumar Gala 提交于
When booting with a ramdisk we bump the amount of memory reserved for the device tree by FDT_RAMDISK_OVERHEAD. However we did not increase the actual size in the device tree blob to match. Its possible on boundary cases that we dont have enough memory according to the device tree blob and get errors like: WARNING: could not set linux,initrd-end FDT_ERR_NOSPACE We can easily fix this by setting the device tree size at the same time we bump the amount of memory reserved for the device tree. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NGerald Van Baren <vanbaren@cideas.com>
-
由 Wolfgang Denk 提交于
This reverts commit f18714dd which cuases compile errors on a number of boards. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Jens Scharsig 提交于
* Fix: if using crc32 command watchdog timed out * change function call crc32(..) to the watchdog-safe variant crc_32_wd(..) to support watchdog reset Signed-off-by: NJens Scharsig <esw@bus-elektronik.de>
-
由 Matthias Weisser 提交于
In some cases (e.g. bootm with a elf payload which is already at the right position) there is a in place copy of data to the same address. Catching this saves some ms while booting. Signed-off-by: NMatthias Weisser <weisserm@arcor.de>
-
由 Rob Herring 提交于
Add support for AHCI controllers that are not PCI based. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Rob Herring 提交于
The ata id string always needs swapping, not just on BE machines. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Heiko Schocher 提交于
This include is needed, if this memory test is used "outside" from post code, for example booting with nand_spl, and using this memory test before copying u-boot code to RAM and jumping to it. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Macpaul Lin 提交于
andes_spi is an spi interface developed by Andes Tech. Signed-off-by: NMacpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: NMike Frysinger <vapier@gentoo.org>
-
由 Jason Hobbs 提交于
Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>
-
由 Jason Hobbs 提交于
Remove an unneeded prototype declaration from the top of main.c, and use plain inline instead of __inline__ to please checkpatch. Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com>
-