Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

MVS1 board has reached end-of-life and can be removed completely.
Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>

The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
8MByte FLASH and 128KByte FRAM.
Signed-off-by: NMark Jackson <mpfj@mimc.co.uk>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

This patch adds support for the Favr-32 board made by EarthLCD.

This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
Ethernet, audio out, USB device, SD-card slot, USART and various other
connectors for cennecting stuff to SPI, I2C, GPIO, etc.
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

Signed-off-by: NStefan Roese <sr@denx.de>

This patch allows booting from FLASH the ML507 board by Xilinx.
Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: NStefan Roese <sr@denx.de>

The Hammerhead platform is built around a AVR32 32-bit microcontroller
from Atmel.  It offers versatile peripherals, such as ethernet, usb
device, usb host etc.

The board also incooperates a power supply and is a Power over Ethernet
(PoE) Powered Device (PD).

Additonally, a Cyclone III FPGA from Altera is integrated on the board.
The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
DDR2 SDRAM interfaces, which will cover even the most exceptional need
of memory bandwidth. Together with the onboard video decoder the board
is ready for video processing.

For more information see: http:///www.miromico.com/hammerheadSigned-off-by: NJulien May <mailinglist@miromico.ch>
[haavard.skinnemoen@atmel.com: various small fixes and adaptions]
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

Support for the adsvix was originally provided by Applied Data
Systems (ADS), inc., now EuroTech, Inc.
The board never shipped aside from some sample boards.
Signed-off-by: NAdrian Filipi <adrian.filipi@eurotech.com>

The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
	among others:
	-Virtex 5 FX FPGA (With a ppc440x5 in it)
	-256MB of SDRAM2
	-32MB of Flash
	-I2C Eeprom
	-System ACE chip
	-Serial ATA connectors
	-RS232 Level Conversors
	-Ethernet Transceiver

This patch gives support to a standard design produced by EDK for this
board: ppc440, uartlite, xilinx_int and flash

- Includes Changes propossed by Stefan Roese and Michal Simek
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>
Acked-by: NStefan Roese <sr@denx.de>

The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>

Add AMCC Redwood reference board that uses the latest
PPC 464 CPU processor combined with a rich mix of peripheral
controllers. The board will support PCIe, mutiple Gig ethernet
ports, advanced hardware RAID assistance and IEEE 1588.
Signed-off-by: NFeng Kan <fkan@amcc.com>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

By Cleanup out-or-tree building for some boards (.depend)
(commit:c8a3b109)
because filse ware changed, some SH-boards have compile error.
I revised this problem.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

This patch adds support for the Lyrtech SFF-SDR board,
based on the TI DaVinci architecture (ARM926EJS).
Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: NPhilip Balister <philip@balister.org>
Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch adds basic support for the TQM8548 module from TQ-Components
(http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
eTSEC 3 and 4

Furthermore Flash buffer write has been enabled to speed up output to
the Flash by approx. a factor of 10.
Signed-off-by: NThomas Waehner <thomas.waehner@tqs.de>
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>

Add MPC8343 based board mvBlueLYNX-M7.
It's a single board stereo camera system.
Please read doc/README.mvblm7 for details.
Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
In this patch, support SCIF, NOR Flash, and Ethernet.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
board. It's currently in production and will be available soon.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>

...and add to MAKEALL script
Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
board.
Signed-off-by: NStelian Pop <stelian@popies.net>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
board.
Signed-off-by: NStelian Pop <stelian@popies.net>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
board.
Signed-off-by: NStelian Pop <stelian@popies.net>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NGary Jennejohn <garyj@denx.de>
Signed-off-by: NStefan Roese <sr@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch adds support for the MX31ADS evaluation board from Freescale,
initialization code is copied from RedBoot sources, also provided by
Freescale.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

This patch is based on the port by Mihai Georgian (see linkstation.c for
Copyright information) and implements support for LinkStation / KuroBox HD
and HG PPC models from Buffalo Technology, whereby HD is deactivated at
the moment, pending network driver fixing.

Notice to users: this is pretty much a barebone port. Support for network
on HG models is already in the U-Boot mainline, but you might also want
patches to switch fan / phy modes depending on the negotiated ethernet
parameters. This patch also doesn't support console switching, booting EM
mode, Buffalo specific ext2 magic number. So, if you want to use any of
those, you need additional patches. Otherwise this patche provides a fully
functional u-boot with a network console on your system.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

This patch adds support for the Phytec Phycore-i.MX31 board
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

This patch adds support for the mx31 litekit board
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

Reverting became necessary after it turned out that the patches in
the u-boot-arm repo were modified, and in some cases corrupted.

This reverts the following commits:

	066bebd6
	7a837b73
	c88ae205
	a147e56f
	d6674e0e
	8c8463cc
	c98b47ad
	8bf69d81
	8c16cb0d
	a574a738
	1377b558
	1704dc20Signed-off-by: NWolfgang Denk <wd@denx.de>

SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>

SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>

SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>

SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>