- 22 9月, 2016 7 次提交
-
-
由 Kever Yang 提交于
This patch use clock API instead of hardcode for get pwm clock. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NSimon Glass <sjg@chromium.org> Fix printf() to debug() nit: Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Xu Ziyuan 提交于
Add a condition to determine the rk3288_sdram_channel size. This patch fixes read sdram_channel property failed from DT on rk3288 boards, which not enable OF_PLATDATA. Signed-off-by: NZiyuan Xu <xzy.xu@rock-chips.com>
-
由 Kever Yang 提交于
This patch add pinctrl for sdcard which may not be initialized before uboot. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Kever Yang 提交于
There is no interrupt line for each PWM which used by pinctrl to get the periph_id, so it's not able to enable the default pinctrl setting by pinctrl framework, let's enable it at board_init(). Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Kever Yang 提交于
This patch enable rk3399 pinctrl driver and gpio driver which is sub-node of pinctrl. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Kever Yang 提交于
This patch add pinctrl driver for rk3399. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Kever Yang 提交于
pmugrf is a module like grf which contain some of the iomux registers and other registers. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 20 9月, 2016 6 次提交
-
-
-
由 Tom Rini 提交于
There are a few boards that use CONFIG_ISO_STRING as part of a sanity check during firmware update at run time. Move this string to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Convert CONFIG_MIP405T from SYS_EXTRA_OPTIONS to a real config There are two boards, MIP405 and MIP405T that have a few differences. Start by checking for CONFIG_TARGET_MIP405. Then introduce CONFIG_TARGET_MIP405T and use that not CONFIG_MIP405T. Next, convert also convert the usage of CONFIG_ISO_STRING to be based on Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
Move the config IDENT_STRING to Kconfig and migrate all boards [sivadur: Migrate zynq boards] Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> [trini: Update configs, add some default to sunxi Kconfig] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Masahiro Yamada 提交于
This reverts commit 90c08d9e. I took a closer look at this after the commit was applied, and found CONFIG_SYS_MALLOC_F_LEN=0x2000 was too much. 8KB memory for SPL is actually too big for some boards. Perhaps 0x800 is enough, but the situation varies board by board. Let's postpone our decision until we come up with a better idea. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 19 9月, 2016 25 次提交
-
-
由 Tom Rini 提交于
Based on A13-OLinuXino, enable DFU and UMS support. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NHans de Goede <hdegoede@redhat.com>
-
由 Simon Glass 提交于
Provide easy helpers for reading integer, string and boolean values from device-tree properties. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The style is to use single quotes for strings where possible. Adjust this function. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a way to find the byte offset of a property within the device tree. This is only supported with the normal libfdt implementation since fdtget does not provide this information. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
After any node/property deletion the device tree can be packed to remove spare space. Add a way to perform this operation. Note that for fdt_fallback, fdtput automatically packs the device tree after deletion, so no action is required here. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add support for deleting a device tree property. With the fallback implementation this uses fdtput. With libfdt it uses the API call and updates the offsets afterwards. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Since we want to be able to change the in-memory device tree using libfdt, use a bytearray instead of a string. This makes interfacing from Python easier. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
For binman we need to support deleting properties in the device tree. This will change the offsets of nodes after the deletion. In preparation, add code to keep track of when the offsets are invalid, and regenerate them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This is not used anywhere in dtoc, so drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
If a source device tree is provide to the Fdt() constructors, compile it automatically. This will be used in tests, where we want to build a particular test .dts file and check that it works correctly in binman. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
When tools want to display information of varying levels of importance, it helps to provide the user with control over the verbosity of these messages. Progress messages work best if they are displayed and then removed from the display when no-longer relevant. Add a new tout library (terminal out) to handle these tasks. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
For tools which want to use input files and temporary output, it is useful to have the handling of these dealt with in one place. Add a new library which allows input files to be read, and output files to be written, all based on a common directory structure. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Some functions have the same code in the subclasses. Move these into the superclass to avoid duplication. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These functions are identical in both subclasses. Move them into the base class. Note: In fact there is a bug in one version, which was fixed by this patch: https://patchwork.ozlabs.org/patch/651697/Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These functions are currently in a separate fdt_util file. Since they are only used from PropBase and subclasses, it makes sense for them to be in the PropBase class. Move these functions into fdt.py along with the list of types. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present we have two separate implementations of the Fdt library, one which uses fdtget/fdtput and one which uses libfdt (via swig). Before adding more functionality it makes sense to create a base class for these. This will allow common functions to be shared, and make the Fdt API a little clearer. Create a new fdt.py file with the base class, and adjust fdt_normal.py and fdt_fallback.py to use it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
In preparation for creating an Fdt base class, rename this file to indicate it is the normal Fdt implementation. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Rather than have dtc worry about which fdt library to use, move this into a helper file. Add a function which creates a new Fdt object and scans it, regardless of the implementation. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This should be in with the other system includes. Move it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
It is more useful to have this method raise an error when something goes wrong. Make this the default and adjust the few callers that don't want to use it this way. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Stefan Brüns 提交于
This complements the size/fatsize/ext4size commands added in commit cf659819 load, save and ls are already implemented for hostfs, now tests can cover the same operations on hostfs and emulated block devices. Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stefan Brüns 提交于
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: NSimon Glass <sjg@chromium.org> Changed 'Sandbox' to 'sandbox' in subject: Signed-off-by: NSimon Glass <sjg@chromium.org>
-
-
-
-
- 18 9月, 2016 2 次提交
-
-
由 Masahiro Yamada 提交于
Import the latest version from the Diag software. - Support LD21 SoC (including DDR chips in the package) - Per-board granule adjustment for both reference and TV boards - Misc cleanups Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Initialize the DPLL (PLL for DRAM) in SPL, and others in U-Boot proper. Split the common code into pll-base-ld20.c for easier re-use. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-