- 04 12月, 2018 9 次提交
-
-
由 Tom Rini 提交于
As much of the USB system has been migrated to DM now, formalize a deadline for migration. Reviewed-by: NMarek Vasut <marex@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Given that at this point the MMC subsystem itself has been migrated along with a number of subsystem drivers, formalize a deadline for migration. Reviewed-by: NSimon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
git://git.denx.de/u-boot-microblaze由 Tom Rini 提交于
Xilinx changes for v2019.01 microblaze: - Use default functions for memory decoding - Showing model from DT zynq: - Fix spi flash DTs - Fix zynq_help_text with CONFIG_SYS_LONGHELP - Tune cse/mini configurations - Enabling cse/mini testing with current targets zynqmp: - Enable gzip SPL support - Fix chip detection logic - Tune mini configurations - DT fixes(spi-flash, models, clocks, etc) - Add support for OF_SEPARATE configurations - Enabling mini testing with current targets - Add mini mtest configuration - Some minor config setting nand: - arasan: Add subpage configuration net: - gem: Add 64bit DMA support
-
git://github.com/agraf/u-boot由 Tom Rini 提交于
Patch queue for rpi - 2018-12-03 A few Raspberry Pi specific changes this time: - Allow 2nd MMC device - Support RPi 3 Model A+ - Allow UUID to find filesystem
-
git://github.com/agraf/u-boot由 Tom Rini 提交于
Patch queue for efi - 2018-12-03 This release is fully packed with lots of glorious improvements in UEFI land again! - Make PE images more standards compliant - Improve sandbox support - Improve correctness - Fix RISC-V execution on virt model - Honor board defined top of ram (fixes a few boards) - Imply DM USB access when distro boot is available - Code cleanups
-
-
由 Tom Rini 提交于
- Baltos platform updates - rtc m41t62 converted to DM. - PowerPC MPC8xx DM conversion - Verified boot updates
-
由 Jonathan Gray 提交于
Add Raspberry Pi 3 Model A+ to list of models, the revision code is 0xE according to the list on raspberrypi.org. Signed-off-by: NJonathan Gray <jsg@jsg.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Jonathan Gray 提交于
Replace various third party lists of Raspberry Pi revision codes in a comment with the list on raspberrypi.org. Signed-off-by: NJonathan Gray <jsg@jsg.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 03 12月, 2018 31 次提交
-
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
CC common/board_r.o common/board_r.c:747:2: error: ‘initr_spi’ undeclared here (not in a function) initr_spi, ^ make[1]: *** [common/board_r.o] Error 1 Fixes: ebe76a2d ("dm: Remove spi_init() from board_r.c when using driver model") Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
This patch switches MCR3000 board to the new DM watchdog. The change in u-boot.lds is because MCR3000.o grows a bit with this patch and doesn't fit anymore below env_offset on some versions of GCC. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
This patch adds a DM driver for the MPC8xx watchdog. Basically, the watchdog is enabled by default from the start and SYPCR register has to be writen once to set the timeout and/or deactivate the watchdog. Once written, it cannot be written again. It means that wdt_stop() can be called before wdt_start() to stop the watchdog, but cannot be called if wdt_start() has been called. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
Add mcr3000 device tree and activate CONFIG_DM and CONFIG_OF_CONTROL Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
-
由 Christophe Leroy 提交于
Reported-by: NJoakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: NJoakim Tjernlund <Joakim.Tjernlund@infinera.com>
-
由 Philippe Reynes 提交于
This update the its file used in vboot test to respect the new node style name defined in doc/uImage.FIT (for example: replace kernel@1 by kernel and fdt@1 by fdt-1) Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Philippe Reynes 提交于
The padding pss is now supported for rsa signature. This add test with padding pss on vboot test. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Philippe Reynes 提交于
Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Philippe Reynes 提交于
Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Philippe Reynes 提交于
We add the support of the padding pss for rsa signature. This new padding is often recommended instead of pkcs-1.5. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Philippe Reynes 提交于
The rsa signature use a padding algorithm. By default, we use the padding pkcs-1.5. In order to add some new padding algorithm, we add a padding framework to manage several padding algorithm. The choice of the padding is done in the file .its. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Philippe Reynes 提交于
Previous implementation of the rsa signature was using the openssl API EVP_Sign*, but the new openssl API EVP_DigestSign* is more flexible. So we move to this new API. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Lukasz Majewski 提交于
After this change the m41t62.c can be used with RTC subsystem (i.e. date command) which uses device model (DM). Signed-off-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Lukasz Majewski 提交于
This change facilitates the conversion of m41t62 RTC driver to device model (DM). Signed-off-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Lukasz Majewski 提交于
No functional change for this commit. Signed-off-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NStefan Roese <sr@denx.de>
-
由 Lukasz Majewski 提交于
This patch moves the RTC M41T62 config define to Kconfig. Signed-off-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Lukasz Majewski 提交于
After this change the 'eeprom' command can be used with DM aware boards. Signed-off-by: NLukasz Majewski <lukma@denx.de>
-
由 Yegor Yefremov 提交于
Remove CONFIG_PHY_ATHEROS and CONFIG_PHY_SMSC from defconfig and select them in Kconfig. Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Yegor Yefremov 提交于
Also get rid of CONFIG_SYS_NAND_SPL_KERNEL_OFFS as SPL_OS_BOOT feature won't be used. Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Yegor Yefremov 提交于
OnRISC Baltos series uses SoM with tps65910 PMIC, so remove "power/tps65217.h" header inclusion. Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Yegor Yefremov 提交于
Use DM for both MMC and USB subsystems and use dedicated DTS for U-Boot configuration. Disable SPL support for GPIO and remove EVMSK leftover for DDR power control via GPIO. Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
This patch throws an error if 64-bit support is expected but DMA hardware is not capable of 64-bit support. It also prints a debug message if DMA is capable of 64-bit but not using it. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Vipul Kumar 提交于
This patch adds 64-bit addressing support for zynq gem. This means it can perform send and receive operations on 64-bit address buffers. Signed-off-by: NVipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 T Karthik Reddy 提交于
Created a new header file for zcu104 RevC board and added below configurations to use MAC address from EEPROM. CONFIG_ZYNQ_GEM_EEPROM_ADDR CONFIG_ZYNQ_EEPROM_BUS Added CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 to xilinx_zynqmp_zcu104_revC_defconfig Signed-off-by: NT Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
git://git.denx.de/u-boot-amlogic由 Tom Rini 提交于
ARM: meson: Add regmap support for clock driver and sync DT with 4.19
-
由 Loic Devulder 提交于
This patch modifies the meson clock driver to use syscon/regmap like the Linux kernel does, as it is needed if we want to share the same DTS files. DTS files are synchronized from Linux 4.19. Signed-off-by: NLoic Devulder <ldevulder@suse.de> Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
-
git://git.denx.de/u-boot-arc由 Tom Rini 提交于
We introduce much better automatic identification of ARC cores. 1. Try to match found HW features to known ARC core templates 2. Print CPU frequency for all ARC boards 3. Add more board-specific info
-