- 18 10月, 2020 5 次提交
-
-
由 Patrick Delaunay 提交于
Done with: ./tools/moveconfig.py VIDEO_BMP_GZIP The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN are not activated in these defconfigs: - trats_defconfig - s5pc210_universal_defconfig - trats2_defconfig Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Dario Binacchi 提交于
For levels equal to the maximum value, the duty cycle must be equal to the period. Signed-off-by: NDario Binacchi <dariobin@libero.it> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Dario Binacchi 提交于
The description of the 'max_level' field was incorrectly assigned to the 'min_level' field. Signed-off-by: NDario Binacchi <dariobin@libero.it>
-
由 Neil Armstrong 提交于
The Amlogic D-PHY in the Amlogic AXG SoC Family does support a frequency higher than 10MHz for the TX Escape Clock, thus make the target rate configurable. This is based on the Linux commit [1] and adapted to the U-Boot driver. [1] a328ca7e4af3 ("drm/bridge: dw-mipi-dsi: permit configuring the escape clock rate") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Neil Armstrong 提交于
The timing values for dw-dsi are often dependent on the used display and according to Philippe Cornu will most likely also depend on the used phy technology in the soc-specific implementation. To solve this and allow specific implementations to define them as needed add a new get_timing callback to phy_ops and call this from the dphy_timing function to retrieve the necessary values for the specific mode. This is based on the Linux commit [1] and adapted to the U-Boot driver. [1] 25ed8aeb9c39 ("drm/bridge/synopsys: dsi: driver-specific configuration of phy timings") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
- 17 10月, 2020 1 次提交
-
-
由 Sean Anderson 提交于
syslog_test.h is in test/log/, not include/ Fixes: 52d3df7f ("log: Allow LOG_DEBUG to always enable log output") Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 16 10月, 2020 26 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-marvell由 Tom Rini 提交于
- Fix Octeon SPI driver for Octeon TX2 - Fix and enhance Octeon watchdog driver - Misc minor enhancements to Octeon TX/TX2
-
由 Tom Rini 提交于
- Bring in the next round of dev_xxx cleanup patches.
-
由 Sean Anderson 提交于
Now that linux/compat.h does not define these macros, we do not need to undefine them. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
All users of these functions now include dm/device_compat.h directly. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
Necessary for dev_xxx. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Necessary for dev_xxx. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Necessary for dev_xxx. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Sean Anderson 提交于
This driver doesn't use DM (in the correct places), so we use a device and not a udevice. We also need to include device_compat.h Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
This was included, but was ifdef'd out. We also need dm.h for struct udevice. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
This header is necessary for the dev_xxx macros. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Stefan Roese 提交于
Enable WDT command for Octeon TX/TX2 boards. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
-
由 Suneel Garapati 提交于
This patch enhances the Octeon TX/TX2 watchdog driver to fully enable the WDT. With this changes, the "wdt" command is now also supported on these platforms. Signed-off-by: NSuneel Garapati <sgarapati@marvell.com> Signed-off-by: NStefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
-
由 Stefan Roese 提交于
Clock support is needed for all Octeon TX/TX2 boards. This patch selects CONFIG_CLK so that it is available. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
-
由 Stefan Roese 提交于
Remove a left-over debug test message from the Octeon TX / TX2 MMC driver. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
-
由 Stefan Roese 提交于
Octeon TX2 sets the TB100_EN bit in the config register. We need to use a fixed 100MHz clock for this as well to work properly. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Jagan Teki <jagan@amarulasolutions.com>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
This includes device_compat.h, and fixes several calls to dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
This header is necessary for the dev_xxx macros. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
We call log_debug, but do not have a category set. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
- 15 10月, 2020 3 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc由 Tom Rini 提交于
- fsl_esdhc_imx cleanup - not send cm13 if send_status is 0. - Add reinit API - Add mmc HS400 for fsl_esdhc - Several cleanup for fsl_esdhc - Add ADMA2 for sdhci
-
https://gitlab.denx.de/u-boot/custodians/u-boot-marvell由 Tom Rini 提交于
- Octeon TX: Add NAND driver (Suneel) - Octeon TX: Add NIC driver driver (Suneel) - Octeon TX2: Add NIC driver driver (Suneel) - Armada 8040: Add iEi Puzzle-M80 board support (Luka) - Armada A37xx SPI: Add support for CS-GPIO (George) - Espressobin: Use Linux model/compatible strings (Andre) - Espressobin: Add armada-3720-espressobin-emmc.dts from Linux (Andre) - Armada A37xx: Small cleanup of config header (Pali)
-
由 Tom Rini 提交于
- Add support for Linux "pstore" dumps. - Button command fixup. - gd cleanup and documentation. - Assorted other cleanups.
-
- 14 10月, 2020 5 次提交
-
-
由 Heinrich Schuchardt 提交于
Sphinx.override_domain() is deprecated since Sphinx 1.8 and removed in Sphinx 3. Use Sphinx.add_domain(, override=True) instead. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Christian Gmeiner 提交于
Set the defaults on probe for the packet buffer size registers for the i210. The TX/RX PBSIZE register of the i210 resets to its default value only at power-on - see Intel Ethernet Controller I210 Datasheet rev 3.5 chapter 8.3 'Internal Packet Buffer Size Registers'. If something (another driver, another OS, etc.) modifies this register from its default value, the e1000 driver doesn't function correctly. It detects a hang of the transmitter and continuously resets the adapter. Here we set this value to its default when resetting the i210 to resolve this issue. Signed-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
-
由 Alper Nebi Yasak 提交于
CONFIG_IS_ENABLED() takes the kconfig name without the CONFIG_ prefix, e.g. CONFIG_IS_ENABLED(CLK) for CONFIG_CLK. Make including the prefix an error in checkpatch.pl so calls in the wrong format aren't accidentally reintroduced. Signed-off-by: NAlper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Alper Nebi Yasak 提交于
CONFIG_IS_ENABLED() takes the kconfig name without the CONFIG_ prefix, e.g. CONFIG_IS_ENABLED(CLK) for CONFIG_CLK. Some of these were being fixed every now and then, see: commit 71ba2cb0 ("board: stm32mp1: correct CONFIG_IS_ENABLED usage for LED") commit a5ada25e ("rockchip: clk: fix wrong CONFIG_IS_ENABLED handling") commit 5daf6e56 ("common: console: Fix duplicated CONFIG in silent env callback") commit 48bfc31b ("MIPS: bootm: Fix broken boot_env_legacy codepath") Fix all files found by `git grep "CONFIG_IS_ENABLED(CONFIG"` by running ':%s/CONFIG_IS_ENABLED(CONFIG_\(\w+\))/CONFIG_IS_ENABLED(\1)/g' in vim. Signed-off-by: NAlper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
Add the description of the global data pointer to the generated HTML documentation. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-