- 29 8月, 2007 5 次提交
-
-
由 Martin Krause 提交于
This patch fixes the "type qualifiers ignored on fuction return tpye" warning for include/s3c2410.h Signed-off-by: NMartin Krause <martin.krause@tqs.de>
-
由 Dirk Behme 提交于
omap2420h4 switched to cfi, so remove old (already disabled) flash.c and flash_probe() calls in env_flash.c. Signed-off-by: NDirk Behme <dirk.behme@gmail.com>
-
由 Kim Phillips 提交于
and make some minor corrections to the FDT part of the README. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
- 28 8月, 2007 2 次提交
-
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
define there own I/O functions. (Needed for the pcs440ep board). - The default I/O Functions are again 8 Bit accesses. - Added CONFIG_CMD_IDE for the pcs440ep Board. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 25 8月, 2007 1 次提交
-
-
由 Yuri Tikhonov 提交于
As experienced on lwmon5, on some boards the POST memory test can corrupt the global data buffer (bd). This patch fixes this issue by checking and limiting this area. Signed-off-by: NYuri Tikhonov <yur@emcraft.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 24 8月, 2007 2 次提交
-
-
由 Stefan Roese 提交于
Since this RTC POST test is taking quite a while to complete it's only initiated upon special keypress same as the complete memory POST. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 23 8月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5 board. Now the "eeprom" command can be used to read/write from/to this device. Additionally a new command was added "eepromwp" to en-/disable the write-protect of this 2nd EEPROM. The 1st EEPROM is not affected by this write-protect command. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 22 8月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 21 8月, 2007 2 次提交
-
-
由 Stefan Roese 提交于
-
由 Stefan Roese 提交于
This patch adds support for the matrix keyboard on the lwmon5 board. Since the implementation in the dsPCI is kind of compatible with the "old" lwmon board, most of the code is copied from the lwmon board directory. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 19 8月, 2007 8 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
-
由 Kim Phillips 提交于
platforms wishing to display RAM diagnostics in addition to size, can do so, on one line, in their own board_add_ram_info() implementation. this consequently eliminates CONFIG_ADD_RAM_INFO. Thanks to Stefan for the hint. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Shinya Kuribayashi 提交于
This patch has been sent on: - 6 Jun 2007 Many users of PCI config read routines tend to ignore the function ret value, and are only concerned about the contents of *val. Based on this, pci_hose_read_config_{byte,word}_via_dword should initialize the *val on dword read error. Without this fix, for example, we'll go on scanning bus with vendor or header_type uninitialized. This brings many unnecessary config trials. Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
-
- 18 8月, 2007 3 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
- 17 8月, 2007 15 次提交
-
-
由 Kim Phillips 提交于
introduced in the implement board_add_ram_info patch as I was cleaning out the magic numbers. sorry. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Kim Phillips 提交于
includes build fixes. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Kim Phillips 提交于
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Kim Phillips 提交于
add board_add_ram_info, to make memory diagnostic output more consistent. u-boot banner output now looks like: DRAM: 256 MB (DDR1, 64-bit, ECC on) and for boards with SDRAM on the local bus, a line such as this is added: SDRAM: 64 MB (local bus) also replaced some magic numbers with their equivalent define names. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Tony Li 提交于
The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board. Signed-off-by Tony Li <tony.li@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-