Add i.MX6UL pins IOMUX file which defines the IOMUX settings for choose.
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
Signed-off-by: NYe.Li <B37916@freescale.com>

Add MXC_CPU_MX6UL for i.MX6UL CPU type which is got at runtime from
DIGPROG register. But the value has been occupied by MXC_CPU_MX6D which
is not real id from DIGPROG register, so change i.MX6D to value 0x67 which
was not occupied.
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
Signed-off-by: NYe.Li <B37916@freescale.com>

Add kconfig options for various SPI flashes and use them in cm-fx6 defconfig.

Cc: Jagan Teki <jteki@openedev.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

With recent additions to USB Kconfig the number of USB options had grown
large enough to warrant a separate menu for USB.

Add a Kconfig menu for USB.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>

Add Kconfig options for USB keyboard and use them for cm-fx6.

Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

Add USB_EHCI_MX6 option to menuconfig and use it when migrating cm-fx6 usb
config to defconfig.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

CPU_V7 is already selected by ARCH_MX6, so no point in selecting it again
by boards that depend on ARCH_MX6.

Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>

cm-fx6 is an MX6 based board, and the menuconfig hierarchy should
reflect that. Make TARGET_CM_FX6 dependant on ARCH_MX6.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

Move CONFIG_CMD_* options that can be selected in menuconfig to cm-fx6
defconfig.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

Refactor display code to only setup hdmi if do_enable_hdmi() is invoked.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

Add support for selecting display preset using the environment variable
"displaytype". This is a preparation for future merging of compulab
omap3_display.c display selection code with the cm-fx6 display selection code.

The "panel" environment variable is retained for backwards compatibility.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

Implement a cm-fx6 specific board_video_skip() to provide the option to not
initialize the display.

The new function does not init display if the environment variable "panel" is
not defined, or if it is set to an unsupported value.

Collateral changes:
- Don't use the global displays array (it's CONFIG_IMX_VIDEO_SKIP specific).
- Don't use detect_hdmi(), since env controlled init makes it unnecessary.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>

U-Boot does not explicitly assign the display to an IPU interface. Instead, it
relies on the power-on default of DI0.

Since the kernel reassigns HDMI display to DI1, after a warm reset the HDMI
display no longer works in U-Boot.

Fix this by explicitly assigning HDMI to IPU1 DI0 in U-Boot.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

1. Add DDR script for mx6qpsabreauto board.
2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9]
   and init the enet pll output to 125Mhz.
3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN.

Build target: mx6qpsabreauto_config

Boot Log:
U-Boot 2015.07-rc2-00071-gfd985ff (Jun 29 2015 - 22:10:55 +0800)

CPU:   Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 34C
Reset cause: POR
Board: MX6Q-Sabreauto revA
I2C:   ready
DRAM:  2 GiB
PMIC:  PFUZE100 ID=0x10
Flash: 32 MiB
NAND:  0 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0

Note:
In this patch, we still add a new config mx6qpsabreauto_config,
since SPL is not supported now, and IMX_CONFIG is needed at
build time, so add this config. Future, when SPL is converted,
this config can be removed.
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
Signed-off-by: NRobin Gong <b38343@freescale.com>
Signed-off-by: NYe.Li <B37916@freescale.com>
Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com>

Detect the SOC and board variant at runtime and change the dtb name,
but not hardcoding the fdt_file env variable.

Take the following patch as a reference.
Íd58699b157df75f1aa0b363ea9c21add21a0c
"mx6cuboxi: Load the correct 'fdtfile' variable"
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NStefano Babic <sbabic@denx.de>

The i.MX6DQP has a PRG module, need to enable its clock for using IPU.
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
Signed-off-by: NBrown Oliver <B37094@freescale.com>
Signed-off-by: NYe.Li <B37916@freescale.com>
Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NStefano Babic <sbabic@denx.de>

Since the i.MX6QP has fixed the issue in boot ROM, so remove the workaround
for i.MX6QP.
Signed-off-by: NYe.Li <B37916@freescale.com>
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
Acked-by: NStefano Babic <sbabic@denx.de>

Since i.MX6QP changes some CCM registers, so modify the clocks settings to
follow the hardware changes.

In c files, use runtime check and discard #ifdef.
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
Signed-off-by: NYe.Li <B37916@freescale.com>
Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NStefano Babic <sbabic@denx.de>

Add cpu type for i.MX6QP/DP.

This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP
and MXC_CPU_MX6DP, we should use:
(is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)).
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
Acked-by: NStefano Babic <sbabic@denx.de>

Use more standard boot scripts and also add the capability of
booting via NFS.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

Use the same DCD settings from Congatec's U-boot tree for
the P/N 016113 card.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

Add SATA support.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

Add LVDS and HDMI support.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

Add USB support.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

cgtqmx6eval has a PFUZE100 FSL PMIC connected to I2C2.

Add support for it.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

Add thermal support so that we can see the following message on boot:

CPU:   Industrial temperature grade (-40C to 105C) at 33C
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

cgtqmx6eval has an eMMC connected to ESDHC3.

Add support for it.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

There is no need to use multiple lines when they fit into a single line.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

Perfoming an OR operation on the error is not a good approach.

Return the error immediately for each ESDHC instance instead.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

Declare 'static' when possible.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

Remove the custom prompt and use the default instead.
Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>

DCIMVAC is upgraded to DCCIMVAC for the individual processor
(Cortex-A7) that the DCIMVAC is executed on.

We should follow the linux dma follow. Before DMA read, first
invalidate dcache then after DMA read, invalidate dcache again.

With the DMA direction DMA_FROM_DEVICE, the dcache need be
invalidated again after the DMA completion. The reason is
that we need explicity make sure the dcache been invalidated
thus to get the DMA'ed memory correctly from the physical memory.
Any cache-line fill during the DMA operations such as the
pre-fetching can cause the DMA coherency issue, thus CPU get the stale data.
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>
Signed-off-by: NYe.Li <B37916@freescale.com>
Signed-off-by: NNitin Garg <nitin.garg@freescale.com>
Signed-off-by: NJason Liu <r64343@freescale.com>
Reviewed-by: NStefano Babic <sbabic@denx.de>

The variable 'ret' is used to store the value returned by pfuze_mode_init(),
so it should be of type 'int' instead of 'unsigned int' in order to
correctly handle negative numbers.

Fix the variable type.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

The variable 'ret' is used to store the value returned by pfuze_mode_init(),
so it should of type 'int' instead of 'unsigned int' in order to correctly
handle negative numbers.

Fix the variable type.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

Warp has a MAX77696 PMIC connected via I2C1 bus.

Add support for it.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

Add support for MAX77696 PMIC.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

It seems that many comments were copied from the I2C uclass, so adjust
the comments for the thermal class.
Reported-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NOtavio Salvador <otavio@ossystems.com.br>
Acked-by: NSimon Glass <sjg@chromium.org>

* Extend imximage DCD version 2 to support DCD commands
  CMD_WRITE_CLR_BIT 4 [address] [mask bit] means:
    while ((*address & ~mask) != 0);
  CMD_CHECK_BITS_SET 4 [address] [mask bit] means:
    while ((*address & mask) != mask);
  CMD_CHECK_BITS_CLR 4 [address] [mask bit] means:
    *address = *address & ~mask;
* Add set_dcd_param_v2 helper function to set DCD
  command parameters
Signed-off-by: NAdrian Alonso <aalonso@freescale.com>
Signed-off-by: NPeng Fan <Peng.Fan@freescale.com>

This patch adds support for the "OHB System AG" baseboard
with is equipped with the TQMa6S SoM.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Stefano Babic <sbabic@denx.de>