Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it
into CONFIG_USB_XHCI_HCD.

As commented in the help of "config USB_XHCI" entry, this has been
a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI
have been unified in favor of the former.

Note:
Some boards define CONFIG_USB_XHCI in their headers without
CONFIG_USB, which does not meet the "depends on" in Kconfig.
I added CONFIG_USB=y for those boards when converting.
Otherwise, they would fail to build.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

As per new PHY framework, DPNI naming convetion is no more used.
Use new naming convention.
Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig
Signed-off-by: NTom Rini <trini@konsulko.com>

A number of moveconfig.py runs have left a instances of multiple empty
lines in a row.  Correct this to a single empty line.
Signed-off-by: NTom Rini <trini@konsulko.com>

This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.
Signed-off-by: NTom Rini <trini@konsulko.com>

This patch enable VID support for ls2080ardb platform.
It uses the common VID driver.
Signed-off-by: NRai Harninder <harninder.rai@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Sec_init has been called at the beginning to initialize SEC Block
(CAAM) which is used by secure boot validation later for both ls2080a
qds and rdb. 64-bit address in ESBC Header has been enabled. Secure
boot defconfigs are created for boards (NOR boot).
Signed-off-by: NSaksham Jain <saksham.jain@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

A white space is missing in multiple-line string for bootargs.
Signed-off-by: NYork Sun <york.sun@nxp.com>

To use AQR405 PHY's interrupt, we need to invert the relative IRQ pins
polarity by setting IRQCR register, because AQR405 interrupt is low
active but GIC accepts high active.
Signed-off-by: NShaohui Xie <Shaohui.Xie@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Define mcinitcmd env variable to load Management complex during
u-boot boot sequence.
Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Increase default hugepage count to 256 from 16
Signed-off-by: NAshish Kumar <Ashish.Kumar@freescale.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Freescale ARM-based Layerscape contains a SATA controller
which comply with the serial ATA 3.0 specification and the
AHCI 1.3 specification.
This patch adds SATA feature on ls2080aqds, ls2080ardb and
ls1043aqds boards.
Signed-off-by: NTang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Remove 115200 from "earlycon" to avoid loss of initial
log messages during linux kernel 4.1  bootup
Signed-off-by: NPratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP
personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc.
So renaming existing LS2085A code base to reflect LS2080A (Prime personality)
Signed-off-by: NPratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Dropped #ifdef in cpu.c for cpu_type_list]
Reviewed-by: NYork Sun <yorksun@freescale.com>

Management complex Firmware, DPL and DPC are depolyed during u-boot boot
sequence.

Add new DPAA2 commands to manage Management Complex (MC) i.e. start mc, aiop
and apply DPL from u-boot command prompt.
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

For most PPC platforms, they will call the first get_clocks() in
init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is
then defined to call the second get_clocks(), which should be
redundant for PPC.
Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

To support on board Aquantia's PHY AQR405.
Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

get_clocks() should not be limited by ESDHC.
Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com>

LS2085 targets supports following UART console
 LS2085AQDS	UART0
 LS2085ARDB	UART1
 LS2085ASim	UART0
 LS2085AEmu	UART0

So update the bootargs as per the default console present at the target
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Move config for the E1000 Ethernet driver to Kconfig and tidy up affected
boards.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

Add USB XHCI support for ls2085rdb platform
Signed-off-by: NNikhil Badola <nikhil.badola@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Enable DSPI flash related configurations for LS2085ARDB.
Signed-off-by: NHaikun Wang <haikun.wang@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Linux itb image size has been increased from 30MB.

So updating kernel_size to 40MB in env variable.
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Export functions required by Aquntia PHY firmware load application.
functions are memset, strcpy, mdelay, mdio_get_current_dev,
phy_find_by_mask, mdio_phydev_for_ethname and miiphy_set_current_dev
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Load AIOP image from NOR flash into DDR so that the MC firmware
the MC fw can start it at boot time
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Board rev C and earlier has duplicated SPD address on 2nd DDR
controller slots. It is fixed on rev D and later. SPD addresses
need to be updated accordingly.

Signed-off-by: York Sun <yorksun at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>

LS2085A supports 6 personalities i.e. LS2045AE, LS2045A, LS2080AE,
LS2080A, LS2085AE and LS2085A personlities.

Instead of hard-coding, board name should change as per selected
personality.

Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Increases the kernel size supported for LS2085A platforms:-
 - Update environment variables
 - Add ramdisk_size in bootargs env variable
 - Define  CONFIG_SYS_BOOTM_LEN to 64MB

Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Primary Mux on I2C1 controller has slave address as 0x75.
So update its address.

Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Enable "date" command for QDS and RDB boards

Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Add hwconfig setting for eSDHC since it shares some pins with other
IP block.

Signed-off-by: Yangbo Lu <yangbo.lu at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

Add support for board eth initialization and support for loading phy
firmware. PHY firmware needs to be loaded from board_eth_init() because
all the MACs are not initialized by ldpaa_eth driver.

Signed-off-by: pankaj chauhan <pankaj.chauhan at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: NTom Rini <trini@konsulko.com>

CONFIG_NET_MULTI is not used anywhere and thus can safely be removed
from the configs.
Acked-by: NMarek Vasut <marex@denx.de>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NLars Poeschel <poeschel@lemonage.de>

This also selects CONFIG_NET for any CONFIG_CMD_NET board.

Remove the imx default for CONFIG_NET.

This moves the config that was defined by 60296a83 (commands: add more
command entries in Kconfig).
Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>

This patch adds esdhc support for ls2085a.
Signed-off-by: NYangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: NYork Sun <yorksun@freescale.com>

Enable NAND boot support using SPL framework. To boot from
NAND, either use DIP switches on board, or "qixis_reset nand"
command. Details of forming NAND image can be found in README.
Signed-off-by: NScott Wood <scottwood@freescale.com>
[York Sun: Remove +S from defconfig after commit 252ed872]
Signed-off-by: NYork Sun <yorksun@freescale.com>

The LS2085ARDB is a evaluation platform that supports LS2085A
family SoCs. This patch add sbasic support for the platform.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NBhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>