- 04 6月, 2016 1 次提交
-
-
由 Masahiro Yamada 提交于
Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 18 5月, 2016 1 次提交
-
-
由 Prabhakar Kushwaha 提交于
As per new PHY framework, DPNI naming convetion is no more used. Use new naming convention. Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 17 5月, 2016 1 次提交
-
-
由 Simon Glass 提交于
This option currently enables both the command and the SCSI functionality. Rename the existing option to CONFIG_SCSI since most of the code relates to the feature. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 26 4月, 2016 3 次提交
-
-
由 Tom Rini 提交于
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
A number of moveconfig.py runs have left a instances of multiple empty lines in a row. Correct this to a single empty line. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 29 3月, 2016 1 次提交
-
-
由 Saksham Jain 提交于
Sec_init has been called at the beginning to initialize SEC Block (CAAM) which is used by secure boot validation later for both ls2080a qds and rdb. 64-bit address in ESBC Header has been enabled. Secure boot defconfigs are created for boards (NOR boot). Signed-off-by: NSaksham Jain <saksham.jain@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 25 2月, 2016 1 次提交
-
-
由 Prabhakar Kushwaha 提交于
Define mcinitcmd env variable to load Management complex during u-boot boot sequence. Signed-off-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 02 2月, 2016 1 次提交
-
-
由 Prabhakar Kushwaha 提交于
kernel_size env variable is defined as 0x28000000, it is beyond NOR flash range. Update kernel_size with 40MB kernel size. Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 15 12月, 2015 1 次提交
-
-
由 Tang Yuantian 提交于
Freescale ARM-based Layerscape contains a SATA controller which comply with the serial ATA 3.0 specification and the AHCI 1.3 specification. This patch adds SATA feature on ls2080aqds, ls2080ardb and ls1043aqds boards. Signed-off-by: NTang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 01 12月, 2015 2 次提交
-
-
由 Prabhakar Kushwaha 提交于
LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: NPratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Prabhakar Kushwaha 提交于
Management complex Firmware, DPL and DPC are depolyed during u-boot boot sequence. Add new DPAA2 commands to manage Management Complex (MC) i.e. start mc, aiop and apply DPL from u-boot command prompt. Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 25 11月, 2015 1 次提交
-
-
由 Bin Meng 提交于
There are already Kconfig options for SPI flash drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
- 30 10月, 2015 1 次提交
-
-
由 Gong Qianyu 提交于
For most PPC platforms, they will call the first get_clocks() in init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is then defined to call the second get_clocks(), which should be redundant for PPC. Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 25 10月, 2015 1 次提交
-
-
由 Gong Qianyu 提交于
get_clocks() should not be limited by ESDHC. Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com>
-
- 02 9月, 2015 1 次提交
-
-
由 Prabhakar Kushwaha 提交于
The X-QSGMII-16PORT is a 4xQSGMII/8xSGMII riser card with eighth SerDes interfaces implemented in PCIe form factor board. It supports followings - Card can operate with up to 4 QSGMII lane simultaneously - Card can operate with up to 8 SGMII lane simultaneously Add support of X-QSGMII-16PORT riser card. This patch also take care of back-ward compatiblity with old SGMII rise cards used on LS2085QDS Platform. Signed-off-by: NKing Chung Lo@freescale.com <KingChungLo@freescale.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 22 8月, 2015 1 次提交
-
-
由 Simon Glass 提交于
Move config for the E1000 Ethernet driver to Kconfig and tidy up affected boards. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 04 8月, 2015 1 次提交
-
-
由 Nikhil Badola 提交于
Add USB XHCI support for ls2085qds platform Signed-off-by: NNikhil Badola <nikhil.badola@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 21 7月, 2015 6 次提交
-
-
由 Haikun Wang 提交于
Enable DSPI flash related configurations. Signed-off-by: NHaikun Wang <haikun.wang@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Prabhakar Kushwaha 提交于
Linux itb image size has been increased from 30MB. So updating kernel_size to 40MB in env variable. Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 J. German Rivera 提交于
Load AIOP image from NOR flash into DDR so that the MC firmware the MC fw can start it at boot time Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Prabhakar Kushwaha 提交于
LS2085A supports 6 personalities i.e. LS2045AE, LS2045A, LS2080AE, LS2080A, LS2085AE and LS2085A personlities. Instead of hard-coding, board name should change as per selected personality. Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Bhupesh Sharma 提交于
Increases the kernel size supported for LS2085A platforms:- - Update environment variables - Add ramdisk_size in bootargs env variable - Define CONFIG_SYS_BOOTM_LEN to 64MB Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Priyanka Jain 提交于
Enable "date" command for QDS and RDB boards Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 26 6月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 02 6月, 2015 1 次提交
-
-
由 Lars Poeschel 提交于
CONFIG_NET_MULTI is not used anywhere and thus can safely be removed from the configs. Acked-by: NMarek Vasut <marex@denx.de> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NLars Poeschel <poeschel@lemonage.de>
-
- 01 6月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a83 (commands: add more command entries in Kconfig). Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 24 4月, 2015 3 次提交
-
-
由 Yangbo Lu 提交于
This patch adds esdhc support for ls2085a. Signed-off-by: NYangbo Lu <yangbo.lu@freescale.com> Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 Scott Wood 提交于
This adds NAND boot support for LS2085AQDS, using SPL framework. Details of forming NAND image can be found in README. Signed-off-by: NScott Wood <scottwood@freescale.com> [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 Prabhakar Kushwaha 提交于
Add support of ethernet: - eth.c: mapping lane to slot for (0x2A, 0x07) - ls2085a.c: To enable/disable dpmac and get link type Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: NYork Sun <yorksun@freescale.com>
-
- 23 4月, 2015 1 次提交
-
-
由 York Sun 提交于
The LS2085AQDS is an evaluatoin platform that supports the LS2085A family SoCs. This patch add basic support of the platform. Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: NBhupesh Sharma <bhupesh.sharma@freescale.com>
-