- 30 3月, 2018 17 次提交
-
-
由 Rick Chen 提交于
Convert CONFIG_FTSDC010_SDIO to Kconfig. So CONFIG_FTSDC010_SDIO can also be removed from config_whitelist.txt. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
-
由 Rick Chen 提交于
CONFIG_FTSDC010_NUMBER was not used anymore, can be removed now. So CONFIG_FTSDC010_NUMBER can also be removed from config_whitelist.txt. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
-
由 Rick Chen 提交于
After drop non-dm code of ftsdc010, the sd register base definition can be droppped now. So CONFIG_FTSDC010_BASE and CONFIG_FTSDC010_BASE_LIST both can be removed from config_whitelist.txt Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
-
由 Rick Chen 提交于
Remove board_mmc_init() in adp-ag101p, adp-ae3xx and nx25-ae250 boards. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
-
由 Rick Chen 提交于
Only three defconfig(adp-ag101p_defconfig, adp-ae3xx_defconfig, nx25-ae250_defconfig) set CONFIG_FTSDC010=y. And they all also enable CONFIG_DM_MMC. So the non-dm code of ftsdc010 can be dropped now. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com> Cc: Greentime Hu <green.hu@gmail.com>
-
由 Rick Chen 提交于
Enable High-Speed mode with cap-sd-highspeed in dts Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
Enable High-Speed mode with cap-sd-highspeed in dts. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
ftsdc010 dm driver has been disable High-Speed mode as default to work around Andes AE3XX platform's problem, because of it does not support High-Speed mode in commit id 73cd56b2. But other platforms or SoCs maybe support this function. So High-Speed mode can be enabled from dts with cap-mmc-highspeed or cap-sd-highspeed property. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
Simply record riscv-linux booting steps and messages from bbl via u-boot on QEMU in README.ae250. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
Add riscv uimage arch to support riscv-linux booting. It can Convert riscv-linux to image which can be booted by bootm command. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
ATAGS is not supported and will be replaced by DT in riscv-linux. So can be removed now. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
riscv-linux should use BBL (Berkeley bootloader) for loading the Linux kernel. U-Boot can play as FSBL(first stage bootloader) to boot BBL and riscv-linux. In BBL's init_first_hart(), it will pass dtb with a1. So implement bootm to pass arguments to BBL correctly. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
It is reported by checkpatch.pl WARNING: static const char * array should probably be static const char * const Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
It is reported by checkpatch.pl WARNING: Missing a blank line after declarations. Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
It is reported by checkpatch.pl. CHECK: Alignment should match open parenthesis Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
It is reported by checkpatch.pl WARNING: Use of volatile is usually wrong: see Documentation/process/volatile-considered-harmful.rst Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
由 Rick Chen 提交于
It is CHECK reported by checkpatch.pl CHECK: Macro argument reuse 'PTE' - possible side-effects? Signed-off-by: NRick Chen <rick@andestech.com> Signed-off-by: NRick Chen <rickchen36@gmail.com>
-
- 26 3月, 2018 4 次提交
-
-
-
-
-
git://git.denx.de/u-boot-microblaze由 Tom Rini 提交于
Xilinx changes for v2018.05 - Fix mkimage recognition - Update all my fragments ZynqMP: - Use clk driver - Support loading elfs in el1 - Various DTS and defconfig changes - Enable newer pmufw versions - Support more clocks - Remove ep108 - Secure image support - Fix memtest setup Zynq: - Enabling watchdog driver - Support more clocks - defconfig changes fpga: - Simplify error path net: - GMII case update
-
- 24 3月, 2018 4 次提交
-
-
由 Petr Vorel 提交于
Signed-off-by: NPetr Vorel <petr.vorel@gmail.com>
-
由 Petr Vorel 提交于
Introduce another difference from upstream (kernel) source in fs/ubifs/super.c: adding preprocessor condition as y variable in mount_ubifs() depends on CONFIG_UBIFS_SILENCE_MSG: fs/ubifs/super.c:1337:15: error: variable ?y? set but not used [-Werror=unused-but-set-variable] long long x, y; Not setting CONFIG_UBIFS_SILENCE_MSG in am335x_igep003x_defconfig and igep0032_defconfig. Although it was defined in their config headers, it depends on CMD_UBIFS which is not set for them. Signed-off-by: NPetr Vorel <petr.vorel@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Heiko Schocher <hs@denx.de>
-
由 Petr Vorel 提交于
Use of CONFIG_UBIFS_SILENCE_MSG was added in 147162da ("ubi: ubifs: Turn off verbose prints") Then it was removed in ff94bc40 ("mtd, ubi, ubifs: resync with Linux-3.14") Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: NPetr Vorel <petr.vorel@gmail.com>
-
由 Sjoerd Simons 提交于
The ti,pindir-d0-out-d1-in property is not expected to have a value according to the device-tree binding, so treat it as a boolean not a uint property. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
- 23 3月, 2018 15 次提交
-
-
git://git.denx.de/u-boot-arc由 Tom Rini 提交于
Alexey: 1. Significantly rework cache-related functionality. In particular that fixes coherency problems in some corner-cases, allows us to enable and disable caches in run-time and still have properly running system, finally support execution from real flash (before we used to run from DDR from the very beginning). 2. Remove string routines implemented in assembly. That allows us to build and run U-Boot on wide range of ARC cores with different configurations. I.e. whatever tuning is used on GCC's command-line we'll get code for desired flavor of ARC. Otherwise for each and every corner-case we would need to add ifdefs in assembly code to accommodate missing instructions etc. 3. Get use of GCC's garbage collector which helps to slim-down resulting image quite a bit. 4. Also now we may disable U-Boot self-relocation for ARC if needed either by platform or for debugging purposes.
-
由 Eugeniy Paltsev 提交于
Refactor GO and PREP subcommands implementation for a simpler override in the boards platform code. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Michal Simek 提交于
Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f240) And cover dts files in board MAINTAINERS files. Reported-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
There is an issue to recognize zynq or zynqmp image because header checking is just the same. That's why zynqmp images are recognized as zynq one. Check unused fields which are initialized to zero in zynq format (__reserved1 0x38 and __reserved2 0x44) which are initialized for zynqmp. This should ensure that images are properly recognized by: ./tools/mkimage -l spl/boot.bin Also show image type as ZynqMP instead of Zynq which is confusing. Reported-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Tested-by: NAlexander Graf <agraf@suse.de>
-
This patch adds new command "zynqmp" to handle zynqmp specific commands like "zynqmp secure". This secure command is used for verifying zynqmp specific secure images. The secure image can either be authenticated or encrypted or both encrypted and authenticated. The secure image is prepared using bootgen and will be in xilinx specific BOOT.BIN format. The optional key can be used for decryption of encrypted image if user key was specified while creation BOOT.BIN. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
ZynqMP Emulation board is no longer tested and there is no reason to keep maintaining it. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
The vcu disable bit in efuse ipdisable register is valid only if PL powered up so, consider PL powerup status for determing EG/EV part. If PL is not powered up, ignore EG/EV part of string. The PL powerup status will be filled by pmufw based on PL PROGB status in the 9th bit of version field. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch print pl clocks (pl0...pl3) and watchdog clock using clk dump. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
NAND erase was not happening for size 1GiB or more. Erase command was executing successfully but in actual, it was not erasing. This patch fixed erase issue for 1 GiB or more size nand. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Use appended dtb which is default option for zynq boards. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
The same command should be used for x16 configuration. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch changed CONFIG_SYS_MEMTEST_SCRATCH address to the accessible DDR address used by alternate memory test. Before this, 0xfffc0000 address was used, which is the OCM address and not enabled in MMU table. So, whenever trying to access 0xfffc0000 address, got Synchronous Abort exception. After changing CONFIG_SYS_MEMTEST_SCRATCH address, alternate memory test is working fine. Signed-off-by: NVipul Kumar <vipulk@xilinx.com> Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Enable watchdog with reset-on-timeout feature. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Watchdog is only enabled in full u-boot. Adoption for SPL should be also done because that's the right place where watchdog should be enabled. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Shreenidhi Shedi 提交于
This IP can be found on Zynq and ZynqMP devices. The driver was tested with reset-on-timeout; feature. Also adding WATCHDOG symbol to Kconfig because it is required. Signed-off-by: NShreenidhi Shedi <imshedi@gmail.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-