This converts the following to Kconfig:
   CONFIG_VIDEO_SW_CURSOR
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NTom Rini <trini@konsulko.com>
[trini: Re-convert, find all the cases where this is off]
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_VGA_AS_SINGLE_DEVICE

Once we migrate to driver model for video, we should be able to drop this
option.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This converts the following to Kconfig:
   CONFIG_SYS_CONSOLE_BG_COL
   CONFIG_SYS_CONSOLE_FG_COL
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_VIDEO_CT69000
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_CFB_CONSOLE_ANSI
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_CFB_CONSOLE
Signed-off-by: NSimon Glass <sjg@chromium.org>

This converts the following to Kconfig:
   CONFIG_SYS_CONSOLE_IS_IN_ENV
   CONFIG_CONSOLE_MUX
Signed-off-by: NSimon Glass <sjg@chromium.org>
[trini: Re-order, re-migrate]
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_LCD
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NJagan Teki <jteki@openedev.com>

This converts the following to Kconfig:
   CONFIG_VIDEO
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NJagan Teki <jteki@openedev.com>

Move these option to Kconfig and tidy up existing uses.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NJagan Teki <jteki@openedev.com>

Move these option to Kconfig and tidy up existing uses.

The Power PC boards don't have a suitable common element: the common header
files don't appear to line up with the Kconfig files as far as I can tell.
This results in a lot of defconfig changes.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NJagan Teki <jteki@openedev.com>
[trini: Re-migrate, update common/console.c logic]
Signed-off-by: NTom Rini <trini@konsulko.com>

Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Move FDT_FIXUP_PARTITIONS to Kconfig and cleanup existing
uses.
Signed-off-by: NHeiko Schocher <hs@denx.de>

Move SYS_OS_BASE to Kconfig and cleanup existing
uses.
Signed-off-by: NHeiko Schocher <hs@denx.de>
[trini: Also migrate a4m2k]
Signed-off-by: NTom Rini <trini@konsulko.com>

Move SPL_OS_BOOT to Kconfig and cleanup existing
uses.
Signed-off-by: NHeiko Schocher <hs@denx.de>

Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default
in certain architectures.  Migrate all config files.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default
in certain architectures.  Migrate all config files.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts coreboot to use DM framebuffer driver.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

At present only chromebook boards are converted to DM video. Other
x86 boards are still using the legacy cfb_console driver. This
switches to use DM version drivers.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Enable CMD_REG option.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Enable palmas PMIC config options.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Enable palmas PMIC config options.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

These two options go together and it is best to do the conversion in one
step. So enable DM_MMC_OPS by default if DM_MMC is enabled.
Signed-off-by: NSimon Glass <sjg@chromium.org>

To speed up conversion to CONFIG_BLK, enable it by default when DM_MMC is
enabled.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Update the configuration to use the new driver. Drop the existing plumbing
code and unused header files.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

We have a number of OlinuXino Lime2 boards (both NAND and eMMC versions)
which were experiencing sporadic hangs. After testing with some heavy
benchmarking and help from the Armbian forum, it was pinned down as the
DRAM settings for the board. The default is 480MHz, but this is unstable,
and even the build instructions from the vendor Olimex themselves say to
set the DRAM clock to 384. See line 96 at:
https://github.com/OLIMEX/OLINUXINO/blob/master/SOFTWARE/A20/A20-build-3.4.103-release-2/BUILD_DESCRIPTION_A20_Olimex_kernel_3.4.103%2B_Jessie_rel_2.txtReviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>

Synology DS109 is based on MV88F6281. The code
is based on Dreamplug code with modificatons
from Synologys open source repository.
Signed-off-by: NWalter Schweizer <swwa@users.sourceforge.net>
Signed-off-by: NStefan Roese <sr@denx.de>

Add DTS support for dra72 evm Rev C which has the following
changes
* Two ethernet ports now instead of the single one in rev B.
* DP83867 ethernet phy instead of DP838865.

Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Enables driver model flag CONFIG_DM_USB for LS2080A
platform defconfigs.
Signed-off-by: NSriram Dash <sriram.dash@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Add device tree support for LS2080ARDB nand boot.
Signed-off-by: NSriram Dash <sriram.dash@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Commit f225d39d ("vexpress: Check TC2 firmware support before defaulting
to nonsec booting") added support to check if the firmware on TC2  is
configured appropriately before booting in nonsec/hyp mode.

However when booting in non-secure/hyp mode, CCI control must be done in
secure firmware and can't  be done in non-secure/hyp mode. In order to
ensure that, this patch disables the cci slave port inteface so that it
is not accessed at all.

Cc: Jon Medhurst <tixy@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Acked-by: NJon Medhurst <tixy@linaro.org>
Tested-by: NJon Medhurst <tixy@linaro.org>

Now that fastboot options are available in Kconfig, we can migrate them
from DRA7 header to corresponding DRA7 defconfigs.
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>

Enable device tree configuration and specify default device tree
for Toradex Colibri iMX7.
Signed-off-by: NStefan Agner <stefan.agner@toradex.com>

Enable Linear Physical Address Extension mode which is a
prerequisite for hypervisor mode.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Enable Linear Physical Address Extension mode which is a
prerequisite for hypervisor mode.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Move DDR3, DDR4 and related config options to Kconfig and clean up
existing uses.
Signed-off-by: NYork Sun <york.sun@nxp.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Move DDR3, DDR4 and realted options to Kconfig and clean up existing
uses.
Signed-off-by: NYork Sun <york.sun@nxp.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Enables driver model flag CONFIG_DM_USB for LS1043A
platform defconfigs.
Signed-off-by: NSriram Dash <sriram.dash@nxp.com>
Reviewed-by: NYork Sun <york.sun@nxp.com>

Signed-off-by: NAlbert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>

Add i.MX6ULL EVK board support:
Add device tree file, which is copied from NXP Linux.
Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR.
The uart iomux settings are still keeped in board file.

Boot Log:
U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800)

CPU:   Freescale i.MX6ULL rev1.0 at 396MHz
CPU:   Commercial temperature grade (0C to 95C) at 15C
Reset cause: POR
Model: Freescale i.MX6 ULL 14x14 EVK Board
Board: MX6ULL 14x14 EVK
DRAM:  512 MiB
MMC:   initialized IMX pinctrl driver
FSL_SDHC: 0, FSL_SDHC: 1
In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0
=> mmc dev 1
switch to partitions #0, OK
mmc1 is current device
Signed-off-by: NPeng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>