- 07 7月, 2012 1 次提交
-
-
由 Stephen Warren 提交于
console isn't used by anything, and the kernel should be set appropriately by whatever script is booting the kernel, not imposed by the bootloader. mem might be useful, but the current value is pretty bogus, since it includes nvmem options that make no sense for an upstream kernel, and equally should not be required for any downstream kernel. Either way, this is also best left to the kernel boot script. smpflag isn't used by anything, and again was probably intended to be a kernel command-line option better set by the kernel boot script. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 29 3月, 2012 1 次提交
-
-
由 Tom Warren 提交于
This switches Ventana over to use FDT for run-time config instead of CONFIG options. At present Ventana does not have its own device tree file - it just uses the Seaboard one. Signed-off-by: NTom Warren <twarren@nvidia.com> Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 24 12月, 2011 1 次提交
-
-
由 Tom Warren 提交于
Seaboard changes have removed the need for common/board.o in the Makefile. Propagate this change to the other Tegra2 builds. Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 10 12月, 2011 1 次提交
-
-
由 Stephen Warren 提交于
Ventana is a board which is very similar to Seaboard. Support it by re-using board/nvidia/seaboard/seaboard.c with minor run-time conditionals. v5: Makefile: Use cmd_link_o_target, remove unused clean/distclean targets. v6: Make gpio_config_uart_seaboard() static. v7: Add MAINTAINERS entry for Ventana. Tom Warren doesn't have Ventana, so he asked me to add myself for this board. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 16 7月, 2011 1 次提交
-
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com> Acked-by: NAndy Fleming <afleming@freescale.com>
-
- 28 4月, 2011 1 次提交
-
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 28 3月, 2011 1 次提交
-
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 21 2月, 2011 3 次提交
-
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 07 2月, 2011 1 次提交
-
-
由 Dirk Eibach 提交于
Board support for the Guntermann & Drunck DLVision-10G. Adds support for multiple FPGAs per board for gdsys 405ep architecture. Adds support for dual link osd hardware for gdsys 405ep. Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 25 10月, 2010 1 次提交
-
-
由 Dirk Eibach 提交于
Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 22 4月, 2010 1 次提交
-
-
由 Stefan Roese 提交于
As discussed on the list, move "arch/ppc" to "arch/powerpc" to better match the Linux directory structure. Please note that this patch also changes the "ppc" target in MAKEALL to "powerpc" to match this new infrastructure. But "ppc" is kept as an alias for now, to not break compatibility with scripts using this name. Signed-off-by: NStefan Roese <sr@denx.de> Acked-by: NWolfgang Denk <wd@denx.de> Acked-by: NDetlev Zundel <dzu@denx.de> Acked-by: NKim Phillips <kim.phillips@freescale.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Anatolij Gustschin <agust@denx.de>
-
- 13 4月, 2010 1 次提交
-
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
- 14 12月, 2000 1 次提交
-
-
由 wdenk 提交于
-
- 13 11月, 2000 1 次提交
-
-
由 wdenk 提交于
-