Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

circbuf could be used as a generic library and is only currently
needed when CONFIG_USB_TTY is defined.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Some versions of 'make' do not handle trailing white-spaces
properly. Trailing spaces in ELF causes a 'fake' source to
be added to the variable COBJS; leading to build failure
(listed below). The problem was found with GNU Make 3.80.

Using text-function 'strip' as a workaround for the problem.

make[1]: Entering directory `/home/sanjeev/u-boot/examples/standalone'
arm-none-linux-gnueabi-gcc -g  -Os   -fno-common -ffixed-r8 -msoft-float
-D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanjeev/u-boot/include
-fno-builtin -ffreestanding -nostdinc -isystem /opt/codesourcery/2009q1-
203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/include -pipe  -DCONFIG_
ARM -D__ARM__ -marm  -mabi=aapcs-linux -mno-thumb-interwork -march=armv5
-Wall -Wstrict-prototypes -fno-stack-protector -g  -Os   -fno-common -ff
ixed-r8 -msoft-float   -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanje
ev/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/co
desourcery/2009q1-203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/includ
e -pipe  -DCONFIG_ARM -D__ARM__ -marm  -mabi=aapcs-linux -mno-thumb-inte
rwork -march=armv5 -I.. -Bstatic -T u-boot.lds  -Ttext 0x80e80000 -o .c
arm-none-linux-gnueabi-gcc: no input files
make[1]: *** [.c] Error 1
make[1]: Leaving directory `/home/sanjeev/u-boot/examples/standalone'
make: *** [examples/standalone] Error 2
premi #
Signed-off-by: NSanjeev Premi <premi@ti.com>

Fixed typo (s/ElF/ELF/).
Signed-off-by: NWolfgang Denk <wd@denx.de>

A bunch of the 85xx boards have this cruft in them - it's not used
anywhere.  Delete it.
Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org>

Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Becky Bruce <beckyb@kernel.crashing.org>

The example FIT image source files do not compile with the latest dtc and
mkimage. The following error message is produced:

DTC: dts->dtb  on file "kernel.its"
Error: kernel.its 7:0 - 1:0 syntax error
FATAL ERROR: Unable to parse input tree
./mkimage: Can't read kernel.itb.tmp: Invalid argument

The FIT image source files are missing the "/dts-v1/;" directive at the
beginning of the file. Add the directive to the examples.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>

The img2srec code creates a lot of typedefs with common names.  These
easily clash with system headers that include these typedefs (like mingw).
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Refuse to setup a platform if the command line ARCH= is not the same
as the one required for the board. This prevents any user with
prehistoric aliases from messing up their builds.

Reported in thread:
http://old.nabble.com/-U-Boot--Build-breaks-on-some-OMAP3-configs-to26132721.html

Inputs from: Mike Frysinger and Wolfgang Denk:
http://lists.denx.de/pipermail/u-boot/2009-November/063642.html

Cc: Wolfgang Denk <wd@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: NNishanth Menon <nm@ti.com>

'netretry = once' does the same as 'netretry = yes', because it is not stored
when it was tried once.
Signed-off-by: NRemy Bohmer <linux@bohmer.net>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NRemy Bohmer <linux@bohmer.net>

When the board is booted without serial cable attached (which
is how most of them will be used) UART RX is left floating and
sometimes picks noise, which interrupts countdown and enters
U-Boot prompt instead of booting the kernel.

Fix this by setting up internal pullup on UART RX pin. This
does not prevent serial from working as the internal pullup
is weak.
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>

The only missing chipselect line support is CS2, and I need it on
CS2...
Signed-off-by: NRemy Bohmer <linux@bohmer.net>

mkimage does not build due to missing strtok_r() and getline() implementation
Signed-off-by: NRemy Bohmer <linux@bohmer.net>

The type is not set for generation of the FIT images, resulting
in no images being created without printing or returning an error
Signed-off-by: NRemy Bohmer <linux@bohmer.net>

	missing cache flush.

    Added instruction and data caches flush.
Signed-off-by: NScott McNutt <smcnutt@psyent.com>

Signed-off-by: NScott McNutt <smcnutt@psyent.com>

	the standalone examples.
Signed-off-by: NScott McNutt <smcnutt@psyent.com>

Reported-by: NPeter Gombos <gombos@protecta.hu>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NJason McMullan <jason.mcmullan@gmail.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@noser.com>
Tested-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NPo-Yu Chuang <ratbert@faraday-tech.com>

Edited commit message.
Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch adds a default bootargs "fbmem" value to the
CONFIG_BOOTARGS string for the MIMC200 board.
Signed-off-by: NMark Jackson <mpfj@mimc.co.uk>

This patch fixes an ugly behavior of the IL712 magnetic coupler
as used on VOM405. These parts will remember their last state
over a power cycle which might cause unwanted behavior.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: NStefan Roese <sr@denx.de>

This patch fixes an ugly behavior of the IL712 magnetic couplers
as used on PLU405. These parts will remember their last state
over a power cycle which might cause unwanted behavior.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: NStefan Roese <sr@denx.de>

This patch is in preparation for the upcoming PLU405 board fix.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: NStefan Roese <sr@denx.de>

We were incorrectly use the max CAM size as the number of entries in
the array for setting up the addrmap.  We should be using the NENTRY
field which is the low 12-bits of TLB1CFG.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Make smc911x_initialize return -1 on error and number of interfaces
detected otherwise.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

When the smc911x driver was converted to NET_MULTI, the smc911x eeprom was
missed.  The config option needed updating as well as overhauling of the
rergister read/write functions.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Tested-by: NMike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

commit 1542fbde
introduced one new bug to chip-select interleaving.

Single DDR controller also can do the chip-select
interleaving if there is dual-rank or qual-rank DIMMs.
Signed-off-by: NDave Liu <daveliu@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>