- 16 1月, 2019 24 次提交
-
-
由 Marek Vasut 提交于
The uuid command is only really useful in U-Boot, but it's useless in SPL. Worse yet, it pulls in various environment manipulation functions as it call env_set(). Do not compile the command in in SPL. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
Add support for gunzip-ing gzip-compressed uImages in the SPL Ymodem code. Loading data over Ymodem can be gruelingly slow, gzip-ing the data can reduce that aggravating slowness at least slightly (depends on the data, u-boot.bin compresses to ~1/3 of it's original size on ARM64), hence add optional support for decompressing gzip-compressed uImages. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
-
由 Simon Goldschmidt 提交于
The platdata initialization structs are currently generated into .rwdata. Make sure the are put into .rodata by generating them as const. Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
dst_len is defined as unsigned long. So use %lu for printf(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
src_len is defined as unsigned long. So use %lu for printf(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
It does not make sense to check if argc < 2 a second time, especially after accessing argv[1]. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
updates is defined as unsigned int. So use %u for printf(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
test->time_ms[] is defined as unsigned. So use %u for printf(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
len is defined as unsigned. So use %u for printf(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
gpio is defined as unsigned int. So we should use %u when calling printf(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrice Chotard 提交于
Building with CONFIG_OF_EMBED generates build warnings, as it should only be used for debugging purposes. Remove CONFIG_OF_EMBED from all stm32 config files which are using this flag. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Marek Vasut 提交于
Make sure the block cache is cleared for the MMC device after it was reinitialized to avoid having any stale data in the cache, like e.g. partition tables or such. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>
-
由 Marek Vasut 提交于
In case the card is removed, force-init the MMC to start the internal machinery which deregisters and invalidate the MMC device. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>
-
由 Marek Vasut 提交于
The mmc_select_mode_and_width() function can be called while the card is in HS200/HS400 mode and can be used to downgrade the card to lower mode, e.g. HS. This is used for example by mmc_boot_part_access_chk() which cannot access the card in HS200/HS400 mode and which is in turn called by saveenv if env is in the MMC. In such case, forcing the card clock to legacy frequency cannot work. Instead, the card must be switched to HS mode first, from which it can then be reprogrammed as needed. However, this procedure needs additional code changes, since the current implementation checks whether the card correctly switched to HS mode in mmc_set_card_speed(). The check only expects that the card will be going to HS mode from lower modes, not from higher modes, hence add a parameter which indicates that the HS200/HS400 to HS downgrade is happening. This makes the code send the switch command first, reconfigure the controller next and finally perform the EXT_CSD readback check. The last two steps cannot be done in reverse order as the card is already in HS mode when the clock are being switched on the controller side. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>
-
由 Enric Balletbo i Serra 提交于
This adds device tree and the DM_MMC driver for the AM335x IGEP based boards. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Enric Balletbo i Serra 提交于
This adds device tree and the DM_MMC driver for the SL50 board. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Enric Balletbo i Serra 提交于
This adds device tree for OMAP3 IGEP based boards and the DM_MMC driver. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Enric Balletbo i Serra 提交于
To save more space, switch to simple malloc here. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Enric Balletbo i Serra 提交于
Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Enric Balletbo i Serra 提交于
The USB support for this board was never really tested, in fact, the presence of these options are more a copy & paste error from the Beagleboard than a feature that really was used. As doesn't work, remove for now. If someone at some point want to add this support he'll need to migrate the board to use CONFIG_DM_USB instead. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Enric Balletbo i Serra 提交于
The IGEP0032 board was never officially pushed upstream and actually I don't have access to this hardware, unless someone with the hardware wants to start working on this doesn't makes sense have this defconfig here. So remove it. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Simon Glass 提交于
Some tests have ended up using double quotes where single quotes could be used. Adjust this for consistency with the rest of U-Boot's Python code. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Manivannan Sadhasivam 提交于
Add MMC nodes for HiKey board based on HI6220 SoC. There are three MMC controllers in this SoC, first one used for eMMC, second one used for SD card and third one is not used by u-boot. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Manivannan Sadhasivam 提交于
Convert HiSilicon HI6220 MMC driver based on DWMMC IP to driver model. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org> [trini: Enable this on poplar] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 15 1月, 2019 16 次提交
-
-
由 Manivannan Sadhasivam 提交于
Default 8MB gunzip size is not enough to load the release kernel, hence fix 64MB size for uncompressing the kernel. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Weijie Gao 提交于
This patch replace OF_EMBED with OF_SEPARATE of defconfig files of MediaTek boards because now OF_EMBED is only used for debugging purpose. Signed-off-by: NWeijie Gao <weijie.gao@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Weijie Gao 提交于
This patch adds new file entries for MediaTek SoCs Signed-off-by: NWeijie Gao <weijie.gao@mediatek.com>
-
由 Weijie Gao 提交于
Enable ethernet related configs to mt7629_rfb_defconfig. Add default IP addresses. Enable noncached memory region required by ethernet driver. Signed-off-by: NMark Lee <Mark-MC.Lee@mediatek.com>
-
由 Weijie Gao 提交于
Enable ethernet related configs to mt7623n_bpir2_defconfig. Add default IP addresses. Enable noncached memory region required by ethernet driver. Signed-off-by: NMark Lee <Mark-MC.Lee@mediatek.com>
-
由 Weijie Gao 提交于
This patch adds ethernet gmac node for MT7629 with internal gigabit phy. Signed-off-by: NMark Lee <Mark-MC.Lee@mediatek.com>
-
由 Weijie Gao 提交于
This patch adds ethernet gmac node for MT7623 with MT7530 gigabit switch. Signed-off-by: NMark Lee <Mark-MC.Lee@mediatek.com>
-
由 Weijie Gao 提交于
This patch adds ethernet support for Mediatek ARM-based SoCs, including a minimum setup of the integrated switch. Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: NMark Lee <Mark-MC.Lee@mediatek.com> Signed-off-by: NWeijie Gao <weijie.gao@mediatek.com> Tested-By: N"Frank Wunderlich" <frank-w@public-files.de>
-
由 Weijie Gao 提交于
The ethsys contains not only the clock gating controller, but also the reset controller for the whole ethernet subsystem and its components. This patch adds binding of the reset controller so that the ethernet node can have references on it. Signed-off-by: NWeijie Gao <weijie.gao@mediatek.com>
-
由 Weijie Gao 提交于
This patch adds reset controller driver for MediaTek SoCs. Signed-off-by: NRyder Lee <ryder.lee@mediatek.com> Signed-off-by: NWeijie Gao <weijie.gao@mediatek.com>
-
由 Shawn Guo 提交于
It enables fastboot support on Poplar board by using DWC2 OTG gadget driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Shawn Guo 提交于
It enables DWC2 OTG gadget driver support for Poplar board. As usb2_phy_init() is being always called from board_init(), we can save the call from board_usb_init(). Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Simon Goldschmidt 提交于
Booting an image currently sets the environment variable "fdtaddr" by calling into 'cmd/fdt.c'. As a result, linking U-Boot fails if CMD_FDT is not enabled. Fix this by adding 'if (CONFIG_IS_ENABLED(CMD_FDT))' to the two places where 'set_working_fdt_addr()' is called. Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Yan Liu 提交于
Enable CONFIG_SPL_YMODEM_SUPPORT to support UART boot Signed-off-by: NYan Liu <yan-liu@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Philipp Tomsich 提交于
Add a test for the bootcount uclass, which uses the RTC bootcount backend (i.e. drivers/bootcount/rtc.c is implictly also tested). Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-