- 24 2月, 2018 4 次提交
-
-
由 Alex Kiernan 提交于
This converts the following to Kconfig: CONFIG_BOOTCOUNT_ENV Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com> Reviewed-by: NLukasz Majewski <lukma@denx.de>
-
由 Alex Kiernan 提交于
This converts the following to Kconfig: CONFIG_BOOTCOUNT_AM33XX Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com> Acked-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com> Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>
-
由 Alex Kiernan 提交于
CONFIG_BOOTCOUNT was only used in mx53ppd, merge it with CONFIG_BOOTCOUNT_LIMIT Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com> Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NIan Ray <ian.ray@ge.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 2月, 2018 2 次提交
-
-
由 Masahiro Yamada 提交于
U-Boot pulled in several core makefiles from Linux. The following are not used in U-Boot: - CONFIG_DEBUG_SECTION_MISMATCH - CONFIG_FTRACE_MCOUNT_RECORD - CONFIG_GCOV_KERNEL - CONFIG_GCOV_PROFILE_ALL - CONFIG_KASAN - CONFIG_MODVERSIONS We can remove the unused code if we like. (although it will get the scripts out of sync) CONFIG_BOOM and CONFIG_HIS_DRIVER are just mentioned in the comment block of scripts/basic/fixdep.c CONFIG_SHELL is not configuration, but a variable for internal-use. It is just a historical misnomer in Kbuild. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Michal Simek 提交于
ll_temac driver was used by Xilinx Microblaze big endian and Xilinx ppc405/ppc440 SoCs. ppc support was removed by: "powerpc: remove 4xx support" (sha1: 98f705c9) and Microblaze BE is not tested for a long time that's why this driver can be removed because none is going to updated it to DM anyway. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 15 2月, 2018 3 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the current set of options we have in Kconfig. We will need to have some options available for SPL and !SPL_FRAMEWORK so this is important. In a few cases we re-order existing options so that we have less escapes from the SPL_FRAMEWORK guard. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The option CONFIG_SPL_MMC_MINIMAL is unused in code, drop it. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 14 2月, 2018 9 次提交
-
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Marek Vasut 提交于
Convert the CONFIG_UPDATE_TFTP and related symbols to Kconfig. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
-
- 09 2月, 2018 2 次提交
-
-
由 Adam Ford 提交于
config_fallbacks.h had some logic to automatically select LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't already selected. By migrating LIB_HW_RAND to Kconfig, we can remove this check from config_fallbacks.h and put it into Kconfig Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NLukasz Majewski <lukma@denx.de> [trini: Turn into a choice, add NET_RANDOM_ETHADDR] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_APBH_DMA CONFIG_APBH_DMA_BURST CONFIG_APBH_DMA_BURST8 Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NStefan Agner <stefan.agner@toradex.com> [trini: Add in MMC as well] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 08 2月, 2018 3 次提交
-
-
由 Stefan Agner 提交于
The motivation for moving MX28 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Stefan Agner 提交于
The motivation for moving MX23 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: NStefan Agner <stefan.agner@toradex.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_MXC_GPIO Signed-off-by: NAdam Ford <aford173@gmail.com>
-
- 31 1月, 2018 3 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SYS_OMAP24_I2C_SLAVE CONFIG_SYS_OMAP24_I2C_SPEED Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NPaul Kocialkowski <contact@paulk.fr>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SYS_DV_CLKMODE CONFIG_SYS_DA850_PLL0_POSTDIV CONFIG_SYS_DA850_PLL0_PLLDIV1 CONFIG_SYS_DA850_PLL0_PLLDIV2 CONFIG_SYS_DA850_PLL0_PLLDIV3 CONFIG_SYS_DA850_PLL0_PLLDIV4 CONFIG_SYS_DA850_PLL0_PLLDIV5 CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV7 CONFIG_SYS_DA850_PLL1_POSTDIV CONFIG_SYS_DA850_PLL1_PLLDIV1 CONFIG_SYS_DA850_PLL1_PLLDIV2 CONFIG_SYS_DA850_PLL1_PLLDIV3 Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Derald D. Woods 提交于
This converts the following to Kconfig: CONFIG_SYS_BOOT_GET_CMDLINE CONFIG_SYS_BOOT_GET_KBD Signed-off-by: NDerald D. Woods <woods.technical@gmail.com>
-
- 29 1月, 2018 5 次提交
-
-
由 Alexander Graf 提交于
Setting config options using headers is deprecated. This patch converts the BCM2835 Mini-UART to Kconfig. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
We want to use Kconfig logic to depend on whether pl01x devices are built in, so let's convert their inclusion selection to Kconfig. This round goes to pl01x. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
We want to use Kconfig logic to depend on whether pl01x devices are built in, so let's convert their inclusion selection to Kconfig. This round goes to pl011. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
We want to use Kconfig logic to depend on whether pl01x devices are built in, so let's convert their inclusion selection to Kconfig. This round goes to pl010. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Tuomas Tynkkynen 提交于
CONFIG_WALNUT was dropped in June 2017 in: commit 98f705c9 ("powerpc: remove 4xx support") While at it, the related CONFIG_MACH_SPECIFIC and the have_of and _machine variables are unused as well, so drop them too. Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
- 25 1月, 2018 1 次提交
-
-
由 Marek Vasut 提交于
Convert these configuration options to Kconfig, update board defconfigs and drop them from whitelist. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 24 1月, 2018 2 次提交
-
-
由 Mario Six 提交于
Previous patches removed the last usages of this config variable, so that it is now obsolete. This patch removes it from the whitelist. Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJagan Teki <jagan@openedev.com> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
由 Mario Six 提交于
0efc0249 ("spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node") added a helper function spi_base_setup_slave_fdt to to set up a SPI slave from a given FDT blob. The only user was the exynos SPI driver. But commit 73186c94 ("dm: exynos: Convert SPI to driver model") removed the use of this function, hence rendering it obsolete. Remove this function, as well as the CONFIG_OF_SPI option, which guarded only this function. Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJagan Teki <jagan@openedev.com> Signed-off-by: NMario Six <mario.six@gdsys.cc>
-
- 23 1月, 2018 6 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SOC_DA8XX CONFIG_SOC_DA850 CONFIG_DA850_LOWLEVEL CONFIG_MACH_DAVINCI_DA850_EVM CONFIG_SYS_DA850_PLL_INIT CONFIG_SYS_DA850_DDR_INIT Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NDavid Lechner <david@lechnology.com> [trini: Rework CONFIG_SYS_DA850_PLL_INIT so it's selected on SOC_DA8XX] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tuomas Tynkkynen 提交于
fat.h unconditionally defines CONFIG_SUPPORT_VFAT (and has done since 2003), so as a result VFAT support is always enabled regardless of whether a board config defines it or not. Drop this unnecessary option. Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Migrate the following symbols to Kconfig: CONFIG_FS_EXT4 CONFIG_EXT4_WRITE The definitions in config_fallbacks.h can now be expressed in Kconfig. Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_ROCKCHIP_USB2_PHY Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_OMAP_USB_PHY Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_TWL4030_USB Signed-off-by: NAdam Ford <aford173@gmail.com>
-