Most tool subdirs do not rely on a configured tree, so move those targets
out of the config checks and unify them in the process.

Also add an easylogo target so people can easily build that.

Also add these new tool targets to the 'tools-all' target.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The helpful shortcut for doing a board config + make was dropped recently
as it conflicted with some new build code.  However, the reason for using
pattern targets originally was to avoid managing a duplicate list of
boards.  Since we now have one centralized place for a list of boards (the
new boards.cfg), we don't need a pattern target -- we can generate the
exact list of boards on the fly.  So do just that.

When cleaning things up, the top level gitignore file ignores all things
that end with ".depend", but the clean target only deletes files that are
named exactly ".depend".  Keep these in sync by having the clean target
punt all files that match the pattern that gitignore is using.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NDetlev Zundel <dzu@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Coding style cleanup.
Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch adds basic support for s5pc210.
s5p-common will be used by all of s5p SoCs.
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

convert the board to the new soc architecture
update default config
i2c upgrade taken from eb_cpux9k2.h & board/BuS/eb_cpux9k2/cpux9k2.c
Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NReinhard Meyer <u-boot@emk-elektronik.de>

Enabled SPD
Enabled DDR2
Enabled hwconfig
Signed-off-by: NYork Sun <yorksun@freescale.com>

Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds support for the Voipac PXA270 board. The support includes:
- Ethernet
- USB
- MMC
- NOR Booting
- OneNAND Booting
- LCD
- HDD
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Acked-by: NScott Wood <scottwood@freescale.com>

The u-boot.lds CPP unification missed the Blackfin-specific clean target.
It is no longer needed, so punt it.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This patch adds minimum support for OMAP4. Code which can be shared
between OMAP3 and OMAP4 is placed in arch/arm/cpu/armv7/omap-common
Signed-off-by: NAneesh V <aneesh@ti.com>
Signed-off-by: NSteve Sakoman <steve@sakoman.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Update CHANGELOG
Signed-off-by: NWolfgang Denk <wd@denx.de>

SH fails building on the target.
This supports this.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Ensure that date is called only with LC_ALL=C locale set to make dates
locale neutral thus preventing lurking of non-ASCII characters into
U-Boot binary.
Signed-off-by: NIlya Yanok <yanok@emcraft.com>

Changed LANG= into LC_ALL= as suggested by Mike Frysinger <vapier@gentoo.org>
Signed-off-by: NWolfgang Denk <wd@denx.de>

This patch adds support for the LaCie ED Mini V2 product
which is based on the Marvell Orion5x SoC.
Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr>

This patch adds support for the Samsung Goni board (S5PC110 SoC)
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Instead of adding explicit build rules for each and every board to the
top level Makefile (which makes it grow and grow), we now provide a
simple default rule and extend the "mkconfig" script to read board
configurations from a plain text file (table), "boards.cfg".

For simple boards it is now sufficient to add a single line of text to
the "boards.cfg" file, no changes to the top level Makefile are needed
any more.

To make the table better readable, change the notation for unused
fields from "NULL" into "-".
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Mike Frysinger <vapier@gentoo.org>

Many boards don't need any special handling in the Makefile. Try and
provide as generic make rules for these as possible.  There are still
many areas where this does not work out really well, but the changes
show the direction we should take, and point out which boards or
architectures need further cleanup.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Instead of stripping the "_config" part from the make target names in
each call of the "mkconfig" script let this script strip the string.

This prepares the ground for forther simplification of the top level
Makefile.
Signed-off-by: NWolfgang Denk <wd@denx.de>

Make printing the "board names" more useful. So far, we would get
output like this;

$ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH
Configuring for P1_P2_RDB board...
   text    data     bss     dec     hex filename
 342612   32656  265212  640480   9c5e0 /work/wd/tmp-ppc/u-boot
Configuring for P1_P2_RDB board...
   text    data     bss     dec     hex filename
 343160   32704  265212  641076   9c834 /work/wd/tmp-ppc/u-boot
Configuring for P1_P2_RDB board...
   text    data     bss     dec     hex filename
 341908   32620  265212  639740   9c2fc /work/wd/tmp-ppc/u-boot
Configuring for P1_P2_RDB board...
   text    data     bss     dec     hex filename
 341908   32620  265212  639740   9c2fc /work/wd/tmp-ppc/u-boot

For all build targets the same board name would be printed, which
makes is often pretty difficult to find out which exact build target
caused problems. With this commit, the real make target name gets
printed instead, which is way more useful:

$ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH
Configuring for P2020RDB board...
   text    data     bss     dec     hex filename
 342612   32656  265212  640480   9c5e0 /work/wd/tmp-ppc/u-boot
Configuring for P2020RDB_NAND board...
   text    data     bss     dec     hex filename
 343160   32704  265212  641076   9c834 /work/wd/tmp-ppc/u-boot
Configuring for P2020RDB_SDCARD board...
   text    data     bss     dec     hex filename
 341908   32620  265212  639740   9c2fc /work/wd/tmp-ppc/u-boot
Configuring for P2020RDB_SPIFLASH board...
   text    data     bss     dec     hex filename
 341908   32620  265212  639740   9c2fc /work/wd/tmp-ppc/u-boot
Signed-off-by: NWolfgang Denk <wd@denx.de>
Acked-by: NDetlev Zundel <dzu@denx.de>
Tested-by: NThomas Chou <thomas@wytron.com.tw>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Provides initial support for TI OMAP-L138/DA850 SoC devices on
a Logic PD EVM board.

Provides:
Initial boot and configuration.
Support for i2c.
UART support (console).
Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: NBen Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: NWolfgang Denk <wd@denx.de>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

DA850/OMAP-L138 is a new SoC from Texas Instruments
(http://focus.ti.com/docs/prod/folders/print/omap-l138.html).
This SoC is similar to DA830/OMAP-L137 in many aspects. Hence
rename the da830 specific files and folders to da8xx to
accommodate DA850/OMAP-L138.
Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: NBen Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: NWolfgang Denk <wd@denx.de>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

This patch adds basic support for the AM3517EVM.
It includes:
	- Board files (.c and .h)
	- Default configuration file
	- Updates for Makefile
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NSanjeev Premi <premi@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a
bunch on on-chip integrated peripherals.  This patch adds support for the
TNETV107X EVM board.
Signed-off-by: NCyril Chemparathy <cyril@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

This patch adds basic support for the AM3517EVM.
It includes:
	- Board files (.c and .h)
	- Default configuration file
	- Updates for Makefile
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NSanjeev Premi <premi@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a
bunch on on-chip integrated peripherals.  This patch adds support for the
TNETV107X EVM board.
Signed-off-by: NCyril Chemparathy <cyril@ti.com>
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>

Add the new board PM9G45 from Ronetix GmbH.
* AT91SAM9G45 MCU at 400Mhz.
* 128MB DDR2 SDRAM
* 256MB NAND
* 10/100 MBits Ethernet DP83848
* Serial number chip DS2401

The board is made as SODIMM200 module.
For more info www.ronatix.at or info@ronetix.at.
Signed-off-by: NAsen Dimov <dimov@ronetix.at>

This patch adds support for the Samsung Goni board (S5PC110 SoC)
Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

The nios-32 arch is obsolete and broken. So it is removed.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

When we changed ARCH from ppc to powerpc we need to treat HOSTARCH the
same way.  We use HOSTARCH == ARCH to determine if a build is native.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot

References:
http://www.globalscaletechnologies.com/t-guruplugdetails.aspx
http://plugcomputer.org

This patch is for GuruPlug Plus, but it supports Standard version
as well.
Signed-off-by: NSiddarth Gore <gores@marvell.com>

This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h
Signed-off-by: NHeiko Schocher <hs@denx.de>

This patch adds support for the Mosaix Technologies, Inc. ICON board,
based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM
(512MB standard) and 64MByte of NOR FLASH.

Support for the onboard SM502 will be added later.
Signed-off-by: NStefan Roese <sr@denx.de>

This is a generic approach to port u-boot for nios2 boards.
You may find the usage of this approach on the nioswiki,
http://nioswiki.com/DasUBoot

A fpga parameter file, which contains base address information
and drivers declaration, is generated from Altera's hardware system
description sopc file using tools.

The example fpga parameter file is compatible with EP1C20, EP1S10
and EP1S40 boards. So these boards can be removed after this commit.
Though epcs controller is removed to cut the dependency of altera_spi
driver.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Signed-off-by: NScott McNutt <smcnutt@psyent.com>

PDM360NG is a MPC5121E based board by ifm ecomatic gmbh.
Signed-off-by: NMichael Weiss <michael.weiss@ifm.com>
Signed-off-by: NDetlev Zundel <dzu@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.
Signed-off-by: NStefan Roese <sr@denx.de>
Acked-by: NWolfgang Denk <wd@denx.de>
Acked-by: NDetlev Zundel <dzu@denx.de>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>