- 15 11月, 2010 1 次提交
-
-
由 Daniel Hobi 提交于
This patch makes tools/env/Makefile more similar to tools/imls: - define HOSTSRCS and HOSTCPPFLAGS, so that .depend generation works. - include U-Boot headers using -idirafter to prevent picking up u-boot/include/errno.h. - use HOSTCFLAGS_NOPED (fw_env.c does not conform to -pedantic). In order to cross-compile tools/env, override the HOSTCC variable as in this example: make tools env HOSTCC=bfin-uclinux-gcc Signed-off-by: NDaniel Hobi <daniel.hobi@schmid-telecom.ch> Tested-by: NDetlev Zundel <dzu@denx.de> Tested-by: NSteve Sakoman <steve.sakoman@linaro.org>
-
- 20 9月, 2010 1 次提交
-
-
由 Mike Frysinger 提交于
Convert the tools/env/Makefile to use the same host tool syntax as the other tool subdirs. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 19 9月, 2010 2 次提交
-
-
由 Daniel Hobi 提交于
Signed-off-by: NDaniel Hobi <daniel.hobi@schmid-telecom.ch>
-
由 Daniel Hobi 提交于
In commit bd7b26f8 (Tools: set multiple variable with fw_setenv utility), the option parsing was changed to getopt_long(3), but option "-n" of fw_printenv was not included. This leads to an error message "invalid option -- 'n'" on stderr, although the output on stdout is correct. Signed-off-by: NDaniel Hobi <daniel.hobi@schmid-telecom.ch>
-
- 09 8月, 2010 1 次提交
-
-
由 Detlev Zundel 提交于
The invalidation of the old environment instance did not work for flashes supporting hardware locking. Now we unlock/lock around this update also. Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
- 30 6月, 2010 1 次提交
-
-
由 Stefano Babic 提交于
Add a sort of batch mode to fw_setenv, allowing to set multiple variables in one shot, without updating the flash after each set as now. It is added the possibility to pass a config file with a list of pairs <variable, value> to be set, separated by a TAB character. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
- 13 4月, 2010 1 次提交
-
-
由 Peter Tyser 提交于
Now that the other architecture-specific lib directories have been moved out of the top-level directory there's not much reason to have the '_generic' suffix on the common lib directory. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
- 16 12月, 2008 1 次提交
-
-
由 Martin Michlmayr 提交于
Reported-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 19 10月, 2008 2 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 richardretanubun 提交于
Added as a convenience for other platforms that uses MPC8360 (has 8 UCC). Six eth interface is chosen because the platform I am using combines UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth. Signed-off-by: NRichard Retanubun <RichardRetanubun@RugggedCom.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
- 11 9月, 2008 1 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 09 9月, 2008 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
Add support for environment in NAND with automatic NOR / NAND recognition, including unaligned environment, bad-block skipping, redundant environment copy. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
- 03 9月, 2008 1 次提交
-
-
由 Wolfgang Denk 提交于
(as needed to support old 2.4 Linux kernel based releases) Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 21 5月, 2008 1 次提交
-
-
由 Wolfgang Denk 提交于
This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 10 5月, 2008 2 次提交
-
-
由 Grant Erickson 提交于
Changed implementation such that fw_printenv returns failure status when one or more specified variables do not exist or when incorrect command syntax is used. This aids scripting fw_printenv such that the script can key of the return status rather than relying on standard error "scraping". Signed-off-by: NGrant Erickson <gerickson@nuovations.com> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Grant Erickson 提交于
In the current top-of-tree, 1.3.3.-rc2, the optional tool 'tools/env/fw_printenv' fails to compile for two reasons: 1) The header watchdog.h cannot be found. 2) The header zlib.h is picked up from the tool chain rather than the project causing a prototype conflict for crc32. This patch addresses both of these issues. Platforms Tested On: - AMCC "Kilauea" Signed-off-by: NGrant Erickson <gerickson@nuovations.com>
-
- 09 1月, 2008 4 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Markus Klotzbücher 提交于
This patch updates the fw_printenv/fw_setenv userspace tool to include the correct MTD header in order to compile against current kernel headers. Backward compatibility is preserved by introducing an option MTD_VERSION which can be set to "old" for compilation using the old MTD headers. Along with this a number of warnings are fixed. Signed-off-by: NMarkus Klotzbuecher <mk@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Markus Klotzbücher 提交于
This patch updates the fw_printenv/fw_setenv userspace tool to include the correct MTD header in order to compile against current kernel headers. Backward compatibility is preserved by introducing an option MTD_VERSION which can be set to "old" for compilation using the old MTD headers. Along with this a number of warnings are fixed. Signed-off-by: NMarkus Klotzbuecher <mk@denx.de>
-
- 02 9月, 2006 1 次提交
-
-
由 Marian Balakowicz 提交于
Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.
-
- 13 3月, 2006 1 次提交
-
-
由 Wolfgang Denk 提交于
Patch by Murray Jensen, 15 Jul 2005
-
- 21 11月, 2005 1 次提交
-
-
由 Wolfgang Denk 提交于
which makes the environment compatible with the hush shell. WARNING: Support for the old '$(...)' syntax will be discontinued in a later version.
-
- 25 9月, 2005 1 次提交
-
-
由 Wolfgang Denk 提交于
Patch by Ara Avanesyan, 01 Feb 2005
-
- 31 12月, 2004 1 次提交
-
-
由 wdenk 提交于
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for additional ethernet addresses. * Cleanup drivers/i82365.c - avoid duplication of code * Fix bogus "cannot span across banks" flash error message * Add support for CompactFlash for the CPC45 Board.
-
- 28 6月, 2003 1 次提交
-
-
由 wdenk 提交于
- remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
-
- 21 6月, 2003 1 次提交
-
-
由 wdenk 提交于
- hymod update - cleanup (especially for gcc-3.x compilers)
-
- 20 4月, 2003 1 次提交
-
-
由 wdenk 提交于
* MPC823 LCD driver: Fill color map backwards, to allow for steady display when Linux takes over * Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS (this time for real). * Add support for "bmp info" and "bmp display" commands to load bitmap images; this can be used (for example in a "preboot" command) to display a splash screen very quickly after poweron. * Add support for 133 MHz clock on INCA-IP board
-
- 13 4月, 2003 1 次提交
-
-
由 wdenk 提交于
Update for R360MPI board * Add new meaning to "autostart" environment variable: If set to "no", a standalone image passed to the "bootm" command will be copied to the load address (and eventually uncompressed), but NOT be started. This can be used to load and uncompress arbitrary data. * Set max brightness for MN11236 displays on TRAB board
-
- 12 3月, 2003 1 次提交
-
-
由 wdenk 提交于
- 16/32 MB and 50/80 MHz support with auto-detection for IP860 - ETH05 and BEDBUG support for CU824 - added support for MicroSys CPC45 - new BOOTROM/FLASH0 and DOC base for PM826 * Patch by Robert Schwebel, 12 Mar 2003: Fix the chpart command on innokom board * Name cleanup: mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h s/PPCBoot/U-Boot/ in some files s/pImage/uImage/ in some files * Patch by Detlev Zundel, 15 Jan 2003: Fix '' command line quoting * Patch by The LEOX team, 19 Jan 2003: - add support for the ELPT860 board - add support for Dallas ds164x RTC
-
- 28 2月, 2003 1 次提交
-
-
由 wdenk 提交于
* Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS * Add image information to README * Fix dual PCMCIA slot support (when running with just one slot populated) * Add VFD type detection to trab board * extend drivers/cs8900.c driver to synchronize ethaddr environment variable with value in the EEPROM * Start adding MIPS support files
-
- 14 2月, 2003 1 次提交
-
-
由 stroese 提交于
-
- 11 1月, 2003 1 次提交
-
-
由 wdenk 提交于
when watchdog is on * Update baudrate in bd_info when it gets changed * Add watchdog trigger points while waiting for serial port (so far only 8xx -- needed on LWMON with 100ms watchdog) * Improve command line tool to access the U-Boot's environment (figuration of the utility, using a config file)
-
- 17 12月, 2002 1 次提交
-
-
由 wdenk 提交于
Add i2c commands to PM826 config * extend I2C POST code: check for list on known addresses
-