When dropping jump block support, the assumption was that all bootroms
supported entry point redirection via the EVT1 register.  Unfortunately,
this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2
and older and BF561).  No one really noticed earlier because these parts
usually are booted by bypassing the bootrom entirely, and older BF533
parts are not supported at all (too many anomalies).
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Make sure we recurse through serial_putc() rather than bang on the UART
transmit register directly to avoid hardware overflows when using \n.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Update CHANGELOG.
Signed-off-by: NWolfgang Denk <wd@denx.de>

lowlevel_init.S is not used any more so remove it.
As consequence, we also don't have to generate u-boot.lds
but can use a static version as before.

This also fixes the out-of-tree build problem introduced
with commit f0a2c7b4 "at91: add support for the PM9263 board"
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
Signed-off-by: NManikandan Pillai <mani.pillai@ti.com>

The Beagle Rev C boards pull UART2 from an alternate set of balls.
Signed-off-by: NSteve Sakoman <steve@sakoman.com>
Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>

Blocks compressed with zlib dont have the full gzip header.

Without this patch, block compressed with zlib cannot be readed!
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>

Separate gunzip in

gunzip: Find the end of the header and call zunzip.
zunzip: Inflate gunzip block without header.

UBI fs blocks can be compresed in lzo, zlib or no-compression. The
current implementation of u-boot supported all the compressions but
there was a bug in the implementation of the zlib blocks.

UBIFS's Zlib blocks do not have header but they were compressed using
gunzip, a function used to decompress gunzip files/sectors with a
header.

This patch adds a new function zunzip that uncompress a zlib block with
no header.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>

Signed-off-by: NDaniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of
get_timer.

Changes since original version:
* Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to
  improve timer resolution.
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>

Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.
Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>

The function display_board_info() displays incorrect
silicon revision - based on the return value from
function get_cpu_rev().

This patch fixes the problem.
Signed-off-by: NSanjeev Premi <premi@ti.com>

The board-types defined in struct omap3_sysinfo seem to be
unused. The function display_board_info() is passed
board type as an argument; which is ignored.

This patch removes all uses of board-type, related definitions
and functions.
Signed-off-by: NSanjeev Premi <premi@ti.com>

Use the functions print_cpuinfo() and checkboard() to
display the cpu and board specific information.

These functions reuse content from the existing function
display_board_info() - which has been removed.

Also, updated the existig OMAP3 configurations to
define:
 - CONFIG_DISPLAY_CPUINFO
 - CONFIG_DISPLAY_BOARDINFO
Signed-off-by: NSanjeev Premi <premi@ti.com>

With this patch non-uniform NOR FLASH chips (chips with multiple erase
regions) can be exported via the cfi-mtd layer and therefor used by UBI.
We select the largest sector size as erasesize. The cfi driver will make
sure that the smaller sectors are handled correctly.
Signed-off-by: NStefan Roese <sr@denx.de>

Fix bug in drawing long version/info strings:
U-Boot version string like
"U-Boot 2009.03-05647-g7c51e06 (Apr 23 2009 - 12:40:00) MPC83XX"
is long and doesn't wrap around correctly while drawing
beside the logo. Such long strings partially overwrite
the logo. This patch is an attempt to fix it.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Get rid of these warnings:

cmd_ext2.c:247: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
cmd_ext2.c:248: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'int'
Signed-off-by: NWolfgang Denk <wd@denx.de>

because legacy NAND support is deprecated converting to current
NAND interface. !This just compile, because I have no more the
hardware to test it.
Signed-off-by: NHeiko Schocher <hs@denx.de>

If the memory used to copy the link_make is "dirty" the string wont
be ended with NULL, throwing out multiple memory bugs.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>
Acked-by: NStefan Roese <sr@denx.de>

Add basic error handling to fread() function calls.  This prevents
compililation warnings such as:

bmp_logo.c: In function ‘main’:
bmp_logo.c:71: warning: ignoring return value of ‘fread’, declared with
attribute warn_unused_result
...
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

This prevents the compilation warning:

ncb.c: In function 'main':
ncb.c:32: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

With this patch the NAND and OneNAND devices are registered in the MTD
subsystem and can then be referenced by the mtdcore code (e.g.
get_mtd_device_nm()). This is needed for the new "ubi part" command
syntax without the flash type parameter (nor|nand|onenand).
Signed-off-by: NStefan Roese <sr@denx.de>

This patch removes this compilation warning when CONFIG_MTD_PARTITIONS is
defined:

nand_base.c: In function 'nand_release':
nand_base.c:2922: warning: implicit declaration of function 'del_mtd_partitions'
Signed-off-by: NStefan Roese <sr@denx.de>

This patch removes the now unnecessary flash type parameter from the
"ubi part" command. Currently the user has to define the type of flash
he will be using UBI on. Example:

=> ubi part nor partition1

With this patch this type parameter is not needed anymore. The user can
now select the partition directly without the flash type paramter.
Example:

=> ubi part partition1

This breaks backward compatibility right now because of the change in the
command syntax. But UBI support is still quite fresh and the advantage of
this new command is syntax big enough for this change. Additionally the
code is much cleaner now.
Signed-off-by: NStefan Roese <sr@denx.de>
CC: Kyungmin Park <kyungmin.park@samsung.com>

As the common code also handles baudrate switching, which the board
specific vct.c driver did not support, this is one of the rare
occassions where deleting code actually adds a feature :)
Signed-off-by: NDetlev Zundel <dzu@denx.de>
Acked-by: NStefan Roese <sr@denx.de>
Acked-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>

On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
> Currently the mtdparts commands are included in the jffs2 command support.
> This doesn't make sense anymore since other commands (e.g. UBI) use this
> infrastructure as well now. This patch separates the mtdparts commands from
> the jffs2 commands making it possible to only select mtdparts when no JFFS2
> support is needed.

One more leftover... Let nboot command know about partitions even if JFFS2
support is not enabled.
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
Acked-by: NStefan Roese <sr@denx.de>

The output_data_short() and input_data_short() functions for the
AmigaOneG3SE are unused and result in compiler warnings.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

__asm__ follows gcc's documented syntax and is generally more common
than __asm.  This change is only asthetic and should not affect
functionality.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

__attribute__ follows gcc's documented syntax and is generally more
common than __attribute.  This change is only asthetic and should not
affect functionality.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

Make the headers in the "mtdparts" command output line up
with their columns ... strike the extra TAB character.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>

sa1100.h is not used anywhere, then remove it.

$ find . -name '*.h' -empty -print
./include/sa1100.h
$ git grep 'sa1100.h' .
$
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

I missed removing this file while implementing the UBIFS support. It's
not referenced at all, so let's remove it. Thanks to Artem Bityutskiy
for spotting.
Signed-off-by: NStefan Roese <sr@denx.de>

UBIFS did not recovery in a situation in which it could
have. The relevant function assumed there could not be
more nodes in an eraseblock after a corrupted node, but
in fact the last (NAND) page written might contain anything.
The correct approach is to check for empty space (0xFF bytes)
from then on.
Signed-off-by: NAdrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: NStefan Roese <sr@denx.de>

The filelen should be signed type, not unsigned type.
otherwise, The condition as below never take.
	if (filelen < 0)
Signed-off-by: NGao Guanhua <B22826@freescale.com>
Signed-off-by: NDave Liu <daveliu@freescale.com>