- 12 8月, 2019 9 次提交
-
-
由 Holger Brunck 提交于
This board is unmaintained and can be removed. This also allows us to remove kmp204x-common.h and integrate it in kmp204x.h. Signed-off-by: NValentin Longchamp <valentin.longchamp@ch.abb.com> Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Holger Brunck 提交于
Signed-off-by: NValentin Longchamp <valentin.longchamp@ch.abb.com> Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Pascal Linder 提交于
Remove the PORTL2 board and all its dependencies as it is no longer supported by the company. Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Pascal Linder 提交于
Activate the driver model for the Ethernet interface (RGMII) in the KM Kirkwood Kconfig file. Additionally, raise the auto negotiation timeout to eight seconds as more time is required for those boards. Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Pascal Linder 提交于
Activate the driver model for the serial interface in the KM Kirkwood Kconfig file. The associated preprocessor definitions could be removed from the header file. However, the clock of 200 MHz needs to be declared in the device tree. Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Pascal Linder 提交于
A typo in the km_kirkwood.h header prevented to undefine the initialization of the Kirkwood PCIe interface. Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Pascal Linder 提交于
Remove unused preprocessor definitions and comments of already eliminated code. The Ethernet driver configuration is already declared in arch/arm/mach-kirkwood/include/mach/config.h and, therefore, superfluous. Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Pascal Linder 提交于
After moving the KM specific configurations to Kconfig, the associated preprocessor definitions can now be removed in the headers. Moreover, the whitelist has been adapted correspondingly. Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Pascal Linder 提交于
To execute the conversion away from board specific header files, Kconfig menus have been implemented for all KM boards and additionally for those having an ARM architecture. For the moment, the preprocessor definitions stay in the headers. The boolean types, however, needed a modification (#define CONFIG_* 1). The default configuration files of some boards required an update in order to not change the currently defined values of the configurations. Signed-off-by: NPascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 11 8月, 2019 2 次提交
-
-
-
git://git.denx.de/u-boot-usb由 Tom Rini 提交于
- DaVinci USB updates - Various OHCI fixes - Gadget fixes
-
- 10 8月, 2019 25 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-x86由 Tom Rini 提交于
- Enable SD slot on Intel Edison - Populate CSRT ACPI table for shared DMA controller on Intel Tangier - Convert Intel ICH-SPI driver to use new spi-mem ops - Enable config_distro_bootcmd for QEMU x86 - Support U-Boot as a payload for Intel Slim Bootloader - Avoid writing temporary asl files into the source tree which fixes the parallel build issue occasionally seen
-
由 Marek Vasut 提交于
Add board code for the R8A77980 V3H Condor board. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add a few bits of platform code to support R8A77980 V3H SoC. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Import R8A77980 V3H DTs and headers from Linux 5.2.7 , commit 5697a9d3d55f. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Import R8A77980 V3H clock tables from Linux 5.2.7 , commit 5697a9d3d55f. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Import R8A77980 V3H PFC tables from Linux 5.2.7 , commit 5697a9d3d55f. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Fix various type warnings when building this driver for 64bit machine. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
The R8A77980 V3H gether needs a few minor adjustments to the sh_eth driver, add them to support ethernet on R8A77980. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
-
由 Igor Opaniuk 提交于
Remove obsolete legacy usbboot wrapper, as distroboot can handle booting from USB drivers. Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Marcel Ziswiler 提交于
Support the V1.2 hardware revision with the following pin muxing changes: Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4 are now used as DDC pins. Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are now used as USB power enable signals. Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power enable signals are now used as GPIO3 and GPIO4. Additionally a new device tree file tegra124-apalis-v1.2-eval.dtb is loaded on V1.2 and later modules and resp. USB power enable signals activated. Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Dominik Sliwa 提交于
When mainline kernels reboot TK1 they use SW_RESET, that reset mode does not reset PMIC. Some rails need to be off for RAM Re-repair to work correctly. Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Marcel Ziswiler 提交于
Remove video=tegrafb0:640x480-16@60 aka VESA VGA mode from vidargs in order for the panel specification in the device tree to be used. This causes the default to be the 10.1" LVDS display which will be available in the Toradex webshop shortly. Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Dominik Sliwa 提交于
Display proper reset reason after the SoC info. Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
Switch to the generic compressed Kernel image type (zImage) instead of the U-Boot specific uImage format. Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NBhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
Disabling ASPM fixes incompatibilities with some PCIe cards Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
Let the kernel print some debug messages when a user program crashes due to an exception. Signed-off-by: NStefan Agner <stefan.agner@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
Use unified values for USB Product/Vendor numbers when the config block is missing Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NMax Krummenacher <max.krummenacher@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
Make sure the Apalis GPIO 8 aka FAN_EN is on when using Apalis TK1 modules. Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NDominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Marcel Ziswiler 提交于
By keeping RESET_MOCI_CTRL low we avoid explicitly releasing RESET_MOCI#. Please note that module hardware versions up to V1.1A will already release RESET_MOCI# in hardware coming out of reset. Please further note that with this change the USB hub on the Apalis Evaluation board is kept in reset in U-Boot and therefore none of its ports are operational in U-Boot. Reviewed-by: NOleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Igor Opaniuk 提交于
We never really added a sensible DFU configuration for platforms based on eMMC. Most of the things one might want to do can also be done with UMS or fastboot, so drop the DFU configuration. Signed-off-by: NIgor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: NPhilippe Schenker <philippe.schenker@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Trent Piepho 提交于
This is a configuration option specific to the tegra controller. Doing it this way makes it show up directly under the tegra controller option, indented one level, as "Disable external clock loopback". The way it is now, it shows up at the end of the controller list, not indented, as if it's some kind of generic MMC configuration option. Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Tom Warren <twarren@nvidia.com> Signed-off-by: NTrent Piepho <tpiepho@impinj.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Simon Glass 提交于
For U-Boot we allow a GPIO to be specified to enable the codec. Add this to the relevant binding files. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Simon Glass 提交于
This file was missed when adding the sound driver to U-Boot. Bring it in from Linux 5.0. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NJon Hunter <jonathanh@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Simon Glass 提交于
This file was missed when adding the sound driver to U-Boot. Bring it in from Linux 5.0. Signed-off-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 09 8月, 2019 4 次提交
-
-
由 Park, Aiden 提交于
The setting up MTRRs have already been done in previous Slim Bootloader stages. Signed-off-by: NAiden Park <aiden.park@intel.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Park, Aiden 提交于
Add slimbootloader board to run U-boot as a Slim Bootloader payload - Add new board/intel/slimbootloader directory with minimum codes - Add slimbootloader configuration files - Add doc/board/intel/slimbootloader.rst Signed-off-by: NAiden Park <aiden.park@intel.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com> [bmeng: add slimbootloader board MAINTAINERS file] Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Park, Aiden 提交于
Add a new device tree which has very minimum nodes - x86 reset - x86 tsc_timer - x86 pci - Slim Bootloader serial Signed-off-by: NAiden Park <aiden.park@intel.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Park, Aiden 提交于
Slim Bootloader already calibrated TSC and provides it to U-Boot. Therefore, U-Boot does not have to re-calibrate TSC. Configuring tsc_base and clock_rate makes x86 tsc_timer driver bypass TSC calibration and use the provided TSC frequency. - Get TSC frequency from performance info hob - Set tsc_base and clock_rate for tsc_timer driver Signed-off-by: NAiden Park <aiden.park@intel.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com>
-