This SoC is too old.  It is difficult to maintain any longer.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Since commit f0776a55 ("spl: dm: Kconfig: SPL_CLK depends on
SPL_DM"), the following warning is displayed:

  $ make uniphier_v8_defconfig
  warning: (ARCH_ZYNQ && ARCH_ZYNQMP && STM32F7 && CLK_UNIPHIER) selects
  SPL_CLK which has unmet direct dependencies (CLK && SPL_DM)

While I am here, I am removing the prompt to make it user-unconfigurable
option so that "select CLK_UNIPHIER" can be omitted.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Do not dereference bmp before the check if it is NULL.

The problem was indicated by cppcheck.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

EFI Fixes for 2017.09:
  - Fix GOP w/o display
  - Fix LocateHandle
  - Fix exit return value truncation
  - Fix missing EFIAPI in efi_locate_handle (for x86)

Fix the IOMUX setting for SDcard CMD pin at the same time.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

The dts from kernel is using rk3228-pinctrl as compatible name,
need to sync with it to make the driver work.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

The description for eMMC/SDIO/SDMMC src is not correct,
update the CRU_CLKSEL11_CON value definition according to TRM.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

The DRAM start address is not 0, so need to update the last bank size
as:
DRAM start addr + DRAM_SIZE - last bank start addr
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

fdtdec.h is included, but not used in rk3399-board-spl.c: remove the
'#include'-statement.
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

There are two same gmac node, remove one.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

UEFI API functions have different return types.
Some return a value of type EFI_STATUS other don't.

We therefore should not cast the return value of EFI_EXIT
to another type than the expression passed to EFI_EXIT.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This changes pci_mmc driver to use PCI_CLASS_SYSTEM_SDHCI instead of
individual vendor id & device id pair to support generic PCI SD host
controller.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>

Sysam stmark2 board is a generic and fully (hw and sw) open board, with
a mcf54415 Coldfire CPU, 128MB of DDR2, 16MB of SPI flash and SD card
as non volatile memories, and a wifi module included on-board.
The board is actually used mainly for Coldfire custodian testing activity
related to the mcf5441x Coldfire family.

For further information please see: http://sysam.it/cff_stmark2.htmlSigned-off-by: NAngelo Dureghello <angelo@sysam.it>
---

Changes in v2:
 - remove CMD_REGINFO
 - add board information in commit message

On some boards, CONFIG_SYS_CS0_BASE can be undefined, since
CS0 is not connected to any signal.
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

- fix cache.c CONFIG_CF_V4e to CONFIG_CF_V4E
- fix cache.c to properly enable/disable cache for V4E
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

For certain boot types and sbf, for V4 cpu's, an early ddr/sdram init
is required. This patch moves this ddr/sdram early initalization
away from start.S (to be board related).
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

During the the conversion to $(SPL_TPL_), the SPL_ fragment was
left over for the NOR, XIP and YMODEM boot methods in SPL, making
these unselectable.

This commit fixes this by dropping the spurious 'SPL_' fragment
from each line.
Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reported-by: NBo Shen <voice.shen@gmail.com>
Fixes: f94e643e (spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds)

Update the tx_delay and rx_delay to match the timing for
rk3399-firefly board to improve the stability of gmac data
transfer.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>

This patch allows to show the EXT_CSD[179] partition_config
register info, just by specifying the dev param:

  U-Boot> mmc partconf 0
  EXT_CSD[179], PARTITION_CONFIG:
  BOOT_ACK: 0x0
  BOOT_PARTITION_ENABLE: 0x0
  PARTITION_ACCESS: 0x0
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

All boards which use DM_MMC have now been converted to use DM_MMC_OPS.
Drop the option and good riddance.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This should depend on SPL_DM_MMC, not SPL_DM. For it and update the only
affected board's defconfig.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Now that the driver supports it, move these boards over to use driver
model fully for MMC.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Enable driver model for MMC (including BLK), SATA and USB. Note that USB
does not yet work correctly since the nodes are disabled. Hopefully this
can be resolved by the maintainer.
Signed-off-by: NSimon Glass <sjg@chromium.org>

When CONFIG_BLK is enabled our weak board_mmc_init() will not be called.
Since there is no clock driver for MX6 yet, we must manually enable the
clocks.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add this file so we can use device-tree control for cm_fx6. It comes from
linux 4.12.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Add support for using driver model for SATA with the cm_fx6 board. The old
code remains for now to permit testing.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This driver does not currently support CONFIG_DM_MMC_OPS. Update it to
fully convert it to driver model.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Update this driver to support a live device tree.
Signed-off-by: NSimon Glass <sjg@chromium.org>

We want to use fsl_esdhc_init() with driver model. Move the mmc_init() out
of this function so that we can use it for our common init.
Signed-off-by: NSimon Glass <sjg@chromium.org>

With driver model we want to store the mmc and configuration structure in
platform data. Set up structure up and use it for non-DM as well.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Since esdhc_init_common() can fail it should return an error code. Update
this and also adjust the timeout mechanism to use get_timer(), which is a
more common approach.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Since esdhc_reset() can fail it should return an error code. Update this
and also adjust the timeout mechanism to use get_timer(), which is a more
common approach.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Driver model wants to use the core functions in this file but accesses the
driver-private data in a different way. Move the code into new 'common'
functions and set up stubs to call these. Also sort the operations into
alphabetical order for consistency.
Signed-off-by: NSimon Glass <sjg@chromium.org>

With driver model we will not use mmc->priv to access driver-private data.
To accomodate this, update internal functions so that we can pass the
private data directly. This will allow the caller to obtain it as it
prefers.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Update this driver to support driver model. This involves implementing the
AHCI operations and reusing existing common code.
Signed-off-by: NSimon Glass <sjg@chromium.org>

At present the AHCI uclass is just a shell and we still use the global
functions to access SATA. Fix this by adding operations to the uclass.
Signed-off-by: NSimon Glass <sjg@chromium.org>