提交 fabb6e14 编写于 作者: P Patrick Delaunay

gpio: stmfx: add function stmfx_read_reg and stmfx_write_reg

Add the helper functions stmfx_read_reg() and stmfx_write_reg() to avoid
duplicated code for access to stmfx's register with mask.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@st.com>
上级 067c7398
......@@ -74,43 +74,49 @@ static int stmfx_write(struct udevice *dev, uint offset, unsigned int val)
return dm_i2c_reg_write(dev_get_parent(dev), offset, val);
}
static int stmfx_conf_set_pupd(struct udevice *dev, unsigned int pin, u32 pupd)
static int stmfx_read_reg(struct udevice *dev, u8 reg_base, uint offset)
{
u8 reg = STMFX_REG_GPIO_PUPD + get_reg(pin);
u32 mask = get_mask(pin);
u8 reg = reg_base + get_reg(offset);
u32 mask = get_mask(offset);
int ret;
ret = stmfx_read(dev, reg);
if (ret < 0)
return ret;
ret = (ret & ~mask) | (pupd ? mask : 0);
return stmfx_write(dev, reg, ret);
return ret < 0 ? ret : !!(ret & mask);
}
static int stmfx_conf_set_type(struct udevice *dev, unsigned int pin, u32 type)
static int stmfx_write_reg(struct udevice *dev, u8 reg_base, uint offset,
uint val)
{
u8 reg = STMFX_REG_GPIO_TYPE + get_reg(pin);
u32 mask = get_mask(pin);
u8 reg = reg_base + get_reg(offset);
u32 mask = get_mask(offset);
int ret;
ret = stmfx_read(dev, reg);
if (ret < 0)
return ret;
ret = (ret & ~mask) | (type ? mask : 0);
ret = (ret & ~mask) | (val ? mask : 0);
return stmfx_write(dev, reg, ret);
}
static int stmfx_gpio_get(struct udevice *dev, unsigned int offset)
static int stmfx_conf_set_pupd(struct udevice *dev, unsigned int offset,
uint pupd)
{
u32 reg = STMFX_REG_GPIO_STATE + get_reg(offset);
u32 mask = get_mask(offset);
int ret;
return stmfx_write_reg(dev, STMFX_REG_GPIO_PUPD, offset, pupd);
}
ret = stmfx_read(dev, reg);
static int stmfx_conf_set_type(struct udevice *dev, unsigned int offset,
uint type)
{
return stmfx_write_reg(dev, STMFX_REG_GPIO_TYPE, offset, type);
}
return ret < 0 ? ret : !!(ret & mask);
static int stmfx_gpio_get(struct udevice *dev, unsigned int offset)
{
return stmfx_read_reg(dev, STMFX_REG_GPIO_STATE, offset);
}
static int stmfx_gpio_set(struct udevice *dev, unsigned int offset, int value)
......@@ -123,50 +129,28 @@ static int stmfx_gpio_set(struct udevice *dev, unsigned int offset, int value)
static int stmfx_gpio_get_function(struct udevice *dev, unsigned int offset)
{
u32 reg = STMFX_REG_GPIO_DIR + get_reg(offset);
u32 mask = get_mask(offset);
int ret;
ret = stmfx_read(dev, reg);
int ret = stmfx_read_reg(dev, STMFX_REG_GPIO_DIR, offset);
if (ret < 0)
return ret;
/* On stmfx, gpio pins direction is (0)input, (1)output. */
return ret & mask ? GPIOF_OUTPUT : GPIOF_INPUT;
return ret ? GPIOF_OUTPUT : GPIOF_INPUT;
}
static int stmfx_gpio_direction_input(struct udevice *dev, unsigned int offset)
{
u32 reg = STMFX_REG_GPIO_DIR + get_reg(offset);
u32 mask = get_mask(offset);
int ret;
ret = stmfx_read(dev, reg);
if (ret < 0)
return ret;
ret &= ~mask;
return stmfx_write(dev, reg, ret & ~mask);
return stmfx_write_reg(dev, STMFX_REG_GPIO_DIR, offset, 0);
}
static int stmfx_gpio_direction_output(struct udevice *dev,
unsigned int offset, int value)
{
u32 reg = STMFX_REG_GPIO_DIR + get_reg(offset);
u32 mask = get_mask(offset);
int ret;
ret = stmfx_gpio_set(dev, offset, value);
if (ret < 0)
return ret;
ret = stmfx_read(dev, reg);
int ret = stmfx_gpio_set(dev, offset, value);
if (ret < 0)
return ret;
return stmfx_write(dev, reg, ret | mask);
return stmfx_write_reg(dev, STMFX_REG_GPIO_DIR, offset, 1);
}
static int stmfx_gpio_probe(struct udevice *dev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册