提交 f78cb2ab 编写于 作者: T Tom Rini

Merge branch 'master' of git://git.denx.de/u-boot-mmc

......@@ -23,7 +23,6 @@
#include <malloc.h>
#include <mmc.h>
#include <dwmmc.h>
#include <asm/arch/clk.h>
#include <asm-generic/errno.h>
#define PAGE_SIZE 4096
......
......@@ -100,7 +100,7 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
else if (cmd->resp_type & MMC_RSP_PRESENT)
xfertyp |= XFERTYP_RSPTYP_48;
#ifdef CONFIG_MX53
#if defined(CONFIG_MX53) || defined(CONFIG_T4240QDS)
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
xfertyp |= XFERTYP_CMDTYP_ABORT;
#endif
......@@ -470,7 +470,7 @@ static int esdhc_init(struct mmc *mmc)
int timeout = 1000;
/* Reset the entire host controller */
esdhc_write32(&regs->sysctl, SYSCTL_RSTA);
esdhc_setbits32(&regs->sysctl, SYSCTL_RSTA);
/* Wait until the controller is available */
while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA) && --timeout)
......@@ -481,7 +481,7 @@ static int esdhc_init(struct mmc *mmc)
esdhc_write32(&regs->scr, 0x00000040);
#endif
esdhc_write32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
esdhc_setbits32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
/* Set the initial clock speed */
mmc_set_clock(mmc, 400000);
......@@ -515,7 +515,7 @@ static void esdhc_reset(struct fsl_esdhc *regs)
unsigned long timeout = 100; /* wait max 100 ms */
/* reset the controller */
esdhc_write32(&regs->sysctl, SYSCTL_RSTA);
esdhc_setbits32(&regs->sysctl, SYSCTL_RSTA);
/* hardware clears the bit when it is done */
while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA) && --timeout)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册