Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 f5a2d6b4 编写于 作者: D Dzmitry Sankouski 提交者： Tom Rini
浏览文件
操作

spmi: msm: add arbiter version 5 support 

Currently driver supports only version 1 and 2.
Version 5 has slightly different registers structure
Signed-off-by: NDzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
上级 324df15a
隐藏空白更改
内联 并排
Showing with 105 addition and 50 deletion
MAINTAINERS
浏览文件 @ f5a2d6b4
......@@ -402,6 +402,7 @@ F: drivers/phy/msm8916-usbh-phy.c
F: drivers/serial/serial_msm.c
F: drivers/serial/serial_msm_geni.c
F: drivers/smem/msm_smem.c
F: drivers/spmi/spmi-msm.c
F: drivers/usb/host/ehci-msm.c
ARM STI
......
drivers/spmi/spmi-msm.c
浏览文件 @ f5a2d6b4
......@@ -19,39 +19,63 @@
DECLARE_GLOBAL_DATA_PTR;
/* PMIC Arbiter configuration registers */
#define PMIC_ARB_VERSION 0x0000
#define PMIC_ARB_VERSION_V2_MIN 0x20010000
#define ARB_CHANNEL_OFFSET(n) (0x4 * (n))
#define SPMI_CH_OFFSET(chnl) ((chnl) * 0x8000)
#define SPMI_REG_CMD0 0x0
#define SPMI_REG_CONFIG 0x4
#define SPMI_REG_STATUS 0x8
#define SPMI_REG_WDATA 0x10
#define SPMI_REG_RDATA 0x18
#define SPMI_CMD_OPCODE_SHIFT 27
#define SPMI_CMD_SLAVE_ID_SHIFT 20
#define SPMI_CMD_ADDR_SHIFT 12
#define SPMI_CMD_ADDR_OFFSET_SHIFT 4
#define SPMI_CMD_BYTE_CNT_SHIFT 0
#define SPMI_CMD_EXT_REG_WRITE_LONG 0x00
#define SPMI_CMD_EXT_REG_READ_LONG 0x01
#define SPMI_STATUS_DONE 0x1
#define PMIC_ARB_VERSION 0x0000
#define PMIC_ARB_VERSION_V2_MIN 0x20010000
#define PMIC_ARB_VERSION_V3_MIN 0x30000000
#define PMIC_ARB_VERSION_V5_MIN 0x50000000
#define APID_MAP_OFFSET_V1_V2_V3 (0x800)
#define APID_MAP_OFFSET_V5 (0x900)
#define ARB_CHANNEL_OFFSET(n) (0x4 * (n))
#define SPMI_CH_OFFSET(chnl) ((chnl) * 0x8000)
#define SPMI_V5_OBS_CH_OFFSET(chnl) ((chnl) * 0x80)
#define SPMI_V5_RW_CH_OFFSET(chnl) ((chnl) * 0x10000)
#define SPMI_REG_CMD0 0x0
#define SPMI_REG_CONFIG 0x4
#define SPMI_REG_STATUS 0x8
#define SPMI_REG_WDATA 0x10
#define SPMI_REG_RDATA 0x18
#define SPMI_CMD_OPCODE_SHIFT 27
#define SPMI_CMD_SLAVE_ID_SHIFT 20
#define SPMI_CMD_ADDR_SHIFT 12
#define SPMI_CMD_ADDR_OFFSET_SHIFT 4
#define SPMI_CMD_BYTE_CNT_SHIFT 0
#define SPMI_CMD_EXT_REG_WRITE_LONG 0x00
#define SPMI_CMD_EXT_REG_READ_LONG 0x01
#define SPMI_STATUS_DONE 0x1
#define SPMI_MAX_CHANNELS 128
#define SPMI_MAX_SLAVES 16
#define SPMI_MAX_PERIPH 256
enum arb_ver {
V1 = 1,
V2,
V3,
V5 = 5
};
#define SPMI_MAX_CHANNELS 128
#define SPMI_MAX_SLAVES 16
#define SPMI_MAX_PERIPH 256
/*
* PMIC arbiter version 5 uses different register offsets for read/write vs
* observer channels.
*/
enum pmic_arb_channel {
PMIC_ARB_CHANNEL_RW,
PMIC_ARB_CHANNEL_OBS,
};
struct msm_spmi_priv {
phys_addr_t arb_chnl; /* ARB channel mapping base */
phys_addr_t arb_chnl; /* ARB channel mapping base */
phys_addr_t spmi_core; /* SPMI core */
phys_addr_t spmi_obs; /* SPMI observer */
phys_addr_t spmi_obs; /* SPMI observer */
/* SPMI channel map */
uint8_t channel_map[SPMI_MAX_SLAVES][SPMI_MAX_PERIPH];
/* SPMI bus arbiter version */
u32 arb_ver;
};
static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off,
......@@ -59,6 +83,7 @@ static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off,
{
struct msm_spmi_priv *priv = dev_get_priv(dev);
unsigned channel;
unsigned int ch_offset;
uint32_t reg = 0;
if (usid >= SPMI_MAX_SLAVES)
......@@ -69,8 +94,8 @@ static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off,
channel = priv->channel_map[usid][pid];
/* Disable IRQ mode for the current channel*/
writel(0x0, priv->spmi_core + SPMI_CH_OFFSET(channel) +
SPMI_REG_CONFIG);
writel(0x0,
priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_CONFIG);
/* Write single byte */
writel(val, priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_WDATA);
......@@ -82,6 +107,11 @@ static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off,
reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);
reg |= 1; /* byte count */
if (priv->arb_ver == V5)
ch_offset = SPMI_V5_RW_CH_OFFSET(channel);
else
ch_offset = SPMI_CH_OFFSET(channel);
/* Send write command */
writel(reg, priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_CMD0);
......@@ -104,6 +134,7 @@ static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off)
{
struct msm_spmi_priv *priv = dev_get_priv(dev);
unsigned channel;
unsigned int ch_offset;
uint32_t reg = 0;
if (usid >= SPMI_MAX_SLAVES)
......@@ -113,8 +144,13 @@ static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off)
channel = priv->channel_map[usid][pid];
if (priv->arb_ver == V5)
ch_offset = SPMI_V5_OBS_CH_OFFSET(channel);
else
ch_offset = SPMI_CH_OFFSET(channel);
/* Disable IRQ mode for the current channel*/
writel(0x0, priv->spmi_obs + SPMI_CH_OFFSET(channel) + SPMI_REG_CONFIG);
writel(0x0, priv->spmi_obs + ch_offset + SPMI_REG_CONFIG);
/* Prepare read command */
reg |= SPMI_CMD_EXT_REG_READ_LONG << SPMI_CMD_OPCODE_SHIFT;
......@@ -124,13 +160,12 @@ static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off)
reg |= 1; /* byte count */
/* Request read */
writel(reg, priv->spmi_obs + SPMI_CH_OFFSET(channel) + SPMI_REG_CMD0);
writel(reg, priv->spmi_obs + ch_offset + SPMI_REG_CMD0);
/* Wait till CMD DONE status */
reg = 0;
while (!reg) {
reg = readl(priv->spmi_obs + SPMI_CH_OFFSET(channel) +
SPMI_REG_STATUS);
reg = readl(priv->spmi_obs + ch_offset + SPMI_REG_STATUS);
}
if (reg ^ SPMI_STATUS_DONE) {
......@@ -139,8 +174,8 @@ static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off)
}
/* Read the data */
return readl(priv->spmi_obs + SPMI_CH_OFFSET(channel) +
SPMI_REG_RDATA) & 0xFF;
return readl(priv->spmi_obs + ch_offset +
SPMI_REG_RDATA) & 0xFF;
}
static struct dm_spmi_ops msm_spmi_ops = {
......@@ -150,31 +185,50 @@ static struct dm_spmi_ops msm_spmi_ops = {
static int msm_spmi_probe(struct udevice *dev)
{
struct udevice *parent = dev->parent;
struct msm_spmi_priv *priv = dev_get_priv(dev);
int node = dev_of_offset(dev);
phys_addr_t config_addr;
u32 hw_ver;
bool is_v1;
u32 version;
int i;
int err;
config_addr = dev_read_addr_index(dev, 0);
priv->spmi_core = dev_read_addr_index(dev, 1);
priv->spmi_obs = dev_read_addr_index(dev, 2);
hw_ver = readl(config_addr + PMIC_ARB_VERSION);
if (hw_ver < PMIC_ARB_VERSION_V3_MIN) {
priv->arb_ver = V2;
version = 2;
priv->arb_chnl = config_addr + APID_MAP_OFFSET_V1_V2_V3;
} else if (hw_ver < PMIC_ARB_VERSION_V5_MIN) {
priv->arb_ver = V3;
version = 3;
priv->arb_chnl = config_addr + APID_MAP_OFFSET_V1_V2_V3;
} else {
priv->arb_ver = V5;
version = 5;
priv->arb_chnl = config_addr + APID_MAP_OFFSET_V5;
if (err) {
dev_err(dev, "could not read APID->PPID mapping table, rc= %d\n", err);
return -1;
}
}
priv->arb_chnl = dev_read_addr(dev);
priv->spmi_core = fdtdec_get_addr_size_auto_parent(gd->fdt_blob,
dev_of_offset(parent), node, "reg", 1, NULL, false);
priv->spmi_obs = fdtdec_get_addr_size_auto_parent(gd->fdt_blob,
dev_of_offset(parent), node, "reg", 2, NULL, false);
hw_ver = readl(priv->arb_chnl + PMIC_ARB_VERSION - 0x800);
is_v1 = (hw_ver < PMIC_ARB_VERSION_V2_MIN);
dev_dbg(dev, "PMIC Arb Version-%d (0x%x)\n", (is_v1 ? 1 : 2), hw_ver);
dev_dbg(dev, "PMIC Arb Version-%d (0x%x)\n", version, hw_ver);
if (priv->arb_chnl == FDT_ADDR_T_NONE ||
priv->spmi_core == FDT_ADDR_T_NONE ||
priv->spmi_obs == FDT_ADDR_T_NONE)
return -EINVAL;
dev_dbg(dev, "priv->arb_chnl address (%llu)\n", priv->arb_chnl);
dev_dbg(dev, "priv->spmi_core address (%llu)\n", priv->spmi_core);
dev_dbg(dev, "priv->spmi_obs address (%llu)\n", priv->spmi_obs);
/* Scan peripherals connected to each SPMI channel */
for (i = 0; i < SPMI_MAX_PERIPH ; i++) {
for (i = 0; i < SPMI_MAX_PERIPH; i++) {
uint32_t periph = readl(priv->arb_chnl + ARB_CHANNEL_OFFSET(i));
uint8_t slave_id = (periph & 0xf0000) >> 16;
uint8_t pid = (periph & 0xff00) >> 8;
......@@ -195,5 +249,5 @@ U_BOOT_DRIVER(msm_spmi) = {
.of_match = msm_spmi_ids,
.ops = &msm_spmi_ops,
.probe = msm_spmi_probe,
.priv_auto = sizeof(struct msm_spmi_priv),
.priv_auto = sizeof(struct msm_spmi_priv),
};
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或