ARM: chiliboard: move towards driver model and device-tree boot

This patch mostly enables DM drivers in board defconfig and all their
dependencies. Additionally we remove ethernet platform data, as all
details are in device-tree now.
Signed-off-by: NMarcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

board/grinn/chiliboard/board.c

@@ -150,56 +150,3 @@ int board_late_init(void)
 	return 0;
 }
 #endif
-
-#if !defined(CONFIG_DM_ETH) && defined(CONFIG_DRIVER_TI_CPSW) && \
-	!defined(CONFIG_SPL_BUILD)
-static void cpsw_control(int enabled)
-{
-	/* VTP can be added here */
-
-	return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-	{
-		.slave_reg_ofs	= 0x208,
-		.sliver_reg_ofs	= 0xd80,
-		.phy_addr	= 0,
-	}
-};
-
-static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= CPSW_MDIO_BASE,
-	.cpsw_base		= CPSW_BASE,
-	.mdio_div		= 0xff,
-	.channels		= 8,
-	.cpdma_reg_ofs		= 0x800,
-	.slaves			= 1,
-	.slave_data		= cpsw_slaves,
-	.ale_reg_ofs		= 0xd00,
-	.ale_entries		= 1024,
-	.host_port_reg_ofs	= 0x108,
-	.hw_stats_reg_ofs	= 0x900,
-	.bd_ram_ofs		= 0x2000,
-	.mac_control		= (1 << 5),
-	.control		= cpsw_control,
-	.host_port_num		= 0,
-	.version		= CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
-	int rv, n = 0;
-
-	writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
-	cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII;
-
-	rv = cpsw_register(&cpsw_data);
-	if (rv < 0)
-		printf("Error %d registering CPSW switch\n", rv);
-	else
-		n += rv;
-
-	return n;
-}
-#endif

configs/chiliboard_defconfig

@@ -29,19 +29,27 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=8000000.nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nand:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="am335x-chiliboard"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_DM_GPIO=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
-CONFIG_DRIVER_TI_CPSW=y
+CONFIG_DM_ETH=y
 CONFIG_MII=y
+CONFIG_DRIVER_TI_CPSW=y
 CONFIG_SPI=y
 CONFIG_OMAP3_SPI=y
+CONFIG_TIMER=y
+CONFIG_OMAP_TIMER=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_DSPS=y
+CONFIG_USB_MUSB_TI=y
 CONFIG_USB_STORAGE=y
 CONFIG_FAT_WRITE=y
 CONFIG_LZO=y
-CONFIG_OF_LIBFDT=y