mpc85xx/t208xqds: Adjust DDR timing parameters

Adjust timing for dual-rank UDIMM, verified on M3CQ-8GHS3C0E for speed of
1066, 1333, 1600, 1866MT/s. The 1866 timing is copied to 2133 timing in
case such DIMM comes available.

Also update single-rank 1866 timing. Enable interactive debugging as well.
Signed-off-by: NYork Sun <yorksun@freescale.com>
CC: Shengzhou Liu <Shengzhou.Liu@freescale.com>

board/freescale/t208xqds/ddr.h

@@ -28,17 +28,16 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl | wrlvl | wrlvl |
 	 * ranks| mhz| GB  |adjst| start | ctl2  | ctl3  |
 	 */
-	{2,  1200,  0,  5,  7,  0x0808090a,  0x0b0c0c0a},
-	{2,  1500,  0,  5,  6,  0x07070809,  0x0a0b0b09},
-	{2,  1600,  0,  5,  8,  0x090b0b0d,  0x0d0e0f0b},
-	{2,  1700,  0,  4,  7,  0x080a0a0c,  0x0c0d0e0a},
-	{2,  1900,  0,  5,  9,  0x0a0b0c0e,  0x0f10120c},
-	{2,  2140,  0,  4,  8,  0x090a0b0d,  0x0e0f110b},
+	{2,  1200,  0,  5,  7,  0x0708090a,  0x0b0c0d09},
+	{2,  1400,  0,  5,  7,  0x08090a0c,  0x0d0e0f0a},
+	{2,  1700,  0,  5,  8,  0x090a0b0c,  0x0e10110c},
+	{2,  1900,  0,  5,  8,  0x090b0c0f,  0x1012130d},
+	{2,  2140,  0,  5,  8,  0x090b0c0f,  0x1012130d},
 	{1,  1200,  0,  5,  7,  0x0808090a,  0x0b0c0c0a},
 	{1,  1500,  0,  5,  6,  0x07070809,  0x0a0b0b09},
 	{1,  1600,  0,  5,  8,  0x090b0b0d,  0x0d0e0f0b},
-	{1,  1700,  0,  4,  7,  0x080a0a0c,  0x0c0d0e0a},
-	{1,  1900,  0,  5,  9,  0x0a0b0c0e,  0x0f10120c},
+	{1,  1700,  0,  4,  8,  0x080a0a0c,  0x0c0d0e0a},
+	{1,  1900,  0,  5,  8,  0x090a0c0d,  0x0e0f110c},
 	{1,  2140,  0,  4,  8,  0x090a0b0d,  0x0e0f110b},
 	{}
 };

include/configs/T208xQDS.h

@@ -234,7 +234,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_FSL_DDR3
-#undef CONFIG_FSL_DDR_INTERACTIVE
+#define CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SYS_SPD_BUS_NUM	0
 #define CONFIG_SYS_SDRAM_SIZE	2048	/* for fixed parameter use */
 #define SPD_EEPROM_ADDRESS1	0x51