提交 e766d9f1 编写于 作者: S Simon Glass 提交者: Bin Meng

x86: Fix device-tree indentation

With the use of a phandle we can outdent the device tree nodes a little.
Fix this.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
上级 c5edefb7
......@@ -23,42 +23,41 @@
#ifdef CONFIG_ROM_SIZE
&rom {
filename = "u-boot.rom";
end-at-4gb;
sort-by-offset;
pad-byte = <0xff>;
size = <CONFIG_ROM_SIZE>;
filename = "u-boot.rom";
end-at-4gb;
sort-by-offset;
pad-byte = <0xff>;
size = <CONFIG_ROM_SIZE>;
#ifdef CONFIG_HAVE_INTEL_ME
intel-descriptor {
filename = CONFIG_FLASH_DESCRIPTOR_FILE;
};
intel-me {
filename = CONFIG_INTEL_ME_FILE;
};
intel-descriptor {
filename = CONFIG_FLASH_DESCRIPTOR_FILE;
};
intel-me {
filename = CONFIG_INTEL_ME_FILE;
};
#endif
#ifdef CONFIG_TPL
u-boot-tpl-with-ucode-ptr {
offset = <CONFIG_TPL_TEXT_BASE>;
};
u-boot-tpl-dtb {
};
u-boot-spl {
offset = <CONFIG_SPL_TEXT_BASE>;
};
u-boot-spl-dtb {
};
u-boot {
offset = <CONFIG_SYS_TEXT_BASE>;
};
u-boot-tpl-with-ucode-ptr {
offset = <CONFIG_TPL_TEXT_BASE>;
};
u-boot-tpl-dtb {
};
u-boot-spl {
offset = <CONFIG_SPL_TEXT_BASE>;
};
u-boot-spl-dtb {
};
u-boot {
offset = <CONFIG_SYS_TEXT_BASE>;
};
#elif defined(CONFIG_SPL)
u-boot-spl-with-ucode-ptr {
offset = <CONFIG_SPL_TEXT_BASE>;
};
u-boot-dtb-with-ucode2 {
type = "u-boot-dtb-with-ucode";
};
u-boot {
u-boot-spl-with-ucode-ptr {
offset = <CONFIG_SPL_TEXT_BASE>;
};
u-boot-dtb-with-ucode2 {
type = "u-boot-dtb-with-ucode";
};
u-boot {
/*
* TODO(sjg@chromium.org):
* Normally we use CONFIG_SYS_TEXT_BASE as the flash offset. But
......@@ -68,67 +67,67 @@
* We need a better solution, perhaps a separate Kconfig.
*/
#if CONFIG_SYS_TEXT_BASE == 0x1110000
offset = <0xfff00000>;
offset = <0xfff00000>;
#else
offset = <CONFIG_SYS_TEXT_BASE>;
offset = <CONFIG_SYS_TEXT_BASE>;
#endif
};
};
#else
u-boot-with-ucode-ptr {
offset = <CONFIG_SYS_TEXT_BASE>;
};
u-boot-with-ucode-ptr {
offset = <CONFIG_SYS_TEXT_BASE>;
};
#endif
u-boot-dtb-with-ucode {
};
u-boot-ucode {
align = <16>;
};
u-boot-dtb-with-ucode {
};
u-boot-ucode {
align = <16>;
};
#ifdef CONFIG_HAVE_MRC
intel-mrc {
offset = <CONFIG_X86_MRC_ADDR>;
};
intel-mrc {
offset = <CONFIG_X86_MRC_ADDR>;
};
#endif
#ifdef CONFIG_HAVE_FSP
intel-fsp {
filename = CONFIG_FSP_FILE;
offset = <CONFIG_FSP_ADDR>;
};
intel-fsp {
filename = CONFIG_FSP_FILE;
offset = <CONFIG_FSP_ADDR>;
};
#endif
#ifdef CONFIG_HAVE_CMC
intel-cmc {
filename = CONFIG_CMC_FILE;
offset = <CONFIG_CMC_ADDR>;
};
intel-cmc {
filename = CONFIG_CMC_FILE;
offset = <CONFIG_CMC_ADDR>;
};
#endif
#ifdef CONFIG_HAVE_VGA_BIOS
intel-vga {
filename = CONFIG_VGA_BIOS_FILE;
offset = <CONFIG_VGA_BIOS_ADDR>;
};
intel-vga {
filename = CONFIG_VGA_BIOS_FILE;
offset = <CONFIG_VGA_BIOS_ADDR>;
};
#endif
#ifdef CONFIG_HAVE_VBT
intel-vbt {
filename = CONFIG_VBT_FILE;
offset = <CONFIG_VBT_ADDR>;
};
intel-vbt {
filename = CONFIG_VBT_FILE;
offset = <CONFIG_VBT_ADDR>;
};
#endif
#ifdef CONFIG_HAVE_REFCODE
intel-refcode {
offset = <CONFIG_X86_REFCODE_ADDR>;
};
intel-refcode {
offset = <CONFIG_X86_REFCODE_ADDR>;
};
#endif
#ifdef CONFIG_TPL
x86-start16-tpl {
offset = <CONFIG_SYS_X86_START16>;
};
x86-start16-tpl {
offset = <CONFIG_SYS_X86_START16>;
};
#elif defined(CONFIG_SPL)
x86-start16-spl {
offset = <CONFIG_SYS_X86_START16>;
};
x86-start16-spl {
offset = <CONFIG_SYS_X86_START16>;
};
#else
x86-start16 {
offset = <CONFIG_SYS_X86_START16>;
};
x86-start16 {
offset = <CONFIG_SYS_X86_START16>;
};
#endif
};
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册