提交 df120142 编写于 作者: H Hans de Goede 提交者: Tom Rini

arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code

Lets be consistent and also replace v7_maint_dcache_all()
with asm code for the invalidate case.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
上级 c09d2905
......@@ -10,15 +10,14 @@
#include <asm/armv7.h>
#include <asm/utils.h>
#define ARMV7_DCACHE_INVAL_ALL 1
#define ARMV7_DCACHE_CLEAN_INVAL_ALL 2
#define ARMV7_DCACHE_INVAL_RANGE 3
#define ARMV7_DCACHE_CLEAN_INVAL_RANGE 4
#define ARMV7_DCACHE_INVAL_RANGE 1
#define ARMV7_DCACHE_CLEAN_INVAL_RANGE 2
#ifndef CONFIG_SYS_DCACHE_OFF
/* Asm functions from cache_v7_asm.S */
void v7_flush_dcache_all(void);
void v7_invalidate_dcache_all(void);
static int check_cache_range(unsigned long start, unsigned long stop)
{
......@@ -37,18 +36,6 @@ static int check_cache_range(unsigned long start, unsigned long stop)
return ok;
}
/*
* Write the level and type you want to Cache Size Selection Register(CSSELR)
* to get size details from Current Cache Size ID Register(CCSIDR)
*/
static void set_csselr(u32 level, u32 type)
{
u32 csselr = level << 1 | type;
/* Write to Cache Size Selection Register(CSSELR) */
asm volatile ("mcr p15, 2, %0, c0, c0, 0" : : "r" (csselr));
}
static u32 get_ccsidr(void)
{
u32 ccsidr;
......@@ -58,85 +45,6 @@ static u32 get_ccsidr(void)
return ccsidr;
}
static u32 get_clidr(void)
{
u32 clidr;
/* Read current CP15 Cache Level ID Register */
asm volatile ("mrc p15,1,%0,c0,c0,1" : "=r" (clidr));
return clidr;
}
static void v7_inval_dcache_level_setway(u32 level, u32 num_sets,
u32 num_ways, u32 way_shift,
u32 log2_line_len)
{
int way, set;
u32 setway;
/*
* For optimal assembly code:
* a. count down
* b. have bigger loop inside
*/
for (way = num_ways - 1; way >= 0 ; way--) {
for (set = num_sets - 1; set >= 0; set--) {
setway = (level << 1) | (set << log2_line_len) |
(way << way_shift);
/* Invalidate data/unified cache line by set/way */
asm volatile (" mcr p15, 0, %0, c7, c6, 2"
: : "r" (setway));
}
}
/* DSB to make sure the operation is complete */
DSB;
}
static void v7_maint_dcache_level_setway(u32 level, u32 operation)
{
u32 ccsidr;
u32 num_sets, num_ways, log2_line_len, log2_num_ways;
u32 way_shift;
set_csselr(level, ARMV7_CSSELR_IND_DATA_UNIFIED);
ccsidr = get_ccsidr();
log2_line_len = ((ccsidr & CCSIDR_LINE_SIZE_MASK) >>
CCSIDR_LINE_SIZE_OFFSET) + 2;
/* Converting from words to bytes */
log2_line_len += 2;
num_ways = ((ccsidr & CCSIDR_ASSOCIATIVITY_MASK) >>
CCSIDR_ASSOCIATIVITY_OFFSET) + 1;
num_sets = ((ccsidr & CCSIDR_NUM_SETS_MASK) >>
CCSIDR_NUM_SETS_OFFSET) + 1;
/*
* According to ARMv7 ARM number of sets and number of ways need
* not be a power of 2
*/
log2_num_ways = log_2_n_round_up(num_ways);
way_shift = (32 - log2_num_ways);
v7_inval_dcache_level_setway(level, num_sets, num_ways,
way_shift, log2_line_len);
}
static void v7_maint_dcache_all(u32 operation)
{
u32 level, cache_type, level_start_bit = 0;
u32 clidr = get_clidr();
for (level = 0; level < 7; level++) {
cache_type = (clidr >> level_start_bit) & 0x7;
if ((cache_type == ARMV7_CLIDR_CTYPE_DATA_ONLY) ||
(cache_type == ARMV7_CLIDR_CTYPE_INSTRUCTION_DATA) ||
(cache_type == ARMV7_CLIDR_CTYPE_UNIFIED))
v7_maint_dcache_level_setway(level, operation);
level_start_bit += 3;
}
}
static void v7_dcache_clean_inval_range(u32 start, u32 stop, u32 line_len)
{
u32 mva;
......@@ -223,7 +131,7 @@ static void v7_inval_tlb(void)
void invalidate_dcache_all(void)
{
v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL);
v7_invalidate_dcache_all();
v7_outer_cache_inval_all();
}
......
......@@ -82,3 +82,73 @@ ENTRY(v7_flush_dcache_all)
THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} )
bx lr
ENDPROC(v7_flush_dcache_all)
/*
* v7_invalidate_dcache_all()
*
* Invalidate the whole D-cache.
*
* Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
*
* Note: copied from __v7_flush_dcache_all above with
* mcr p15, 0, r11, c7, c14, 2
* Replaced with:
* mcr p15, 0, r11, c7, c6, 2
*/
ENTRY(__v7_invalidate_dcache_all)
dmb @ ensure ordering with previous memory accesses
mrc p15, 1, r0, c0, c0, 1 @ read clidr
mov r3, r0, lsr #23 @ move LoC into position
ands r3, r3, #7 << 1 @ extract LoC*2 from clidr
beq inval_finished @ if loc is 0, then no need to clean
mov r10, #0 @ start clean at cache level 0
inval_levels:
add r2, r10, r10, lsr #1 @ work out 3x current cache level
mov r1, r0, lsr r2 @ extract cache type bits from clidr
and r1, r1, #7 @ mask of the bits for current cache only
cmp r1, #2 @ see what cache we have at this level
blt inval_skip @ skip if no cache, or just i-cache
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
isb @ isb to sych the new cssr&csidr
mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
and r2, r1, #7 @ extract the length of the cache lines
add r2, r2, #4 @ add 4 (line length offset)
movw r4, #0x3ff
ands r4, r4, r1, lsr #3 @ find maximum number on the way size
clz r5, r4 @ find bit position of way size increment
movw r7, #0x7fff
ands r7, r7, r1, lsr #13 @ extract max number of the index size
inval_loop1:
mov r9, r7 @ create working copy of max index
inval_loop2:
ARM( orr r11, r10, r4, lsl r5 ) @ factor way and cache number into r11
THUMB( lsl r6, r4, r5 )
THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11
ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11
THUMB( lsl r6, r9, r2 )
THUMB( orr r11, r11, r6 ) @ factor index number into r11
mcr p15, 0, r11, c7, c6, 2 @ invalidate by set/way
subs r9, r9, #1 @ decrement the index
bge inval_loop2
subs r4, r4, #1 @ decrement the way
bge inval_loop1
inval_skip:
add r10, r10, #2 @ increment cache number
cmp r3, r10
bgt inval_levels
inval_finished:
mov r10, #0 @ swith back to cache level 0
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
dsb st
isb
bx lr
ENDPROC(__v7_invalidate_dcache_all)
ENTRY(v7_invalidate_dcache_all)
ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} )
THUMB( stmfd sp!, {r4-r7, r9-r11, lr} )
bl __v7_invalidate_dcache_all
ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} )
THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} )
bx lr
ENDPROC(v7_invalidate_dcache_all)
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册