mx5: Optimize lowlevel_init code size

Optimize mx5 lowlevel_init.S code size:
 - Compute values at compile time rather than at runtime where possible.
 - Assign r4 to hold the zero value rather than setting registers to 0 again and
   again.
 - Associate a function to setup_pll rather than expanding its large macro code
   multiple times.
 - Allocate constant values in section only if used.
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Tested-by: NStefano Babic <sbabic@denx.de>
Acked-by: NStefano Babic <sbabic@denx.de>

arch/arm/cpu/armv7/mx5/lowlevel_init.S

@@ -24,6 +24,8 @@
 #include <generated/asm-offsets.h>
 #include <linux/linkage.h>
 
+.section ".text.init", "x"
+
 /*
  * L2CC Cache setup/invalidation/disable
  */
@@ -34,15 +36,14 @@
 	mcr 15, 0, r0, c1, c0, 1
 
 	/* reconfigure L2 cache aux control reg */
-	mov r0, #0xC0			/* tag RAM */
-	add r0, r0, #0x4		/* data RAM */
-	orr r0, r0, #1 << 24		/* disable write allocate delay */
-	orr r0, r0, #1 << 23		/* disable write allocate combine */
-	orr r0, r0, #1 << 22		/* disable write allocate */
+	ldr r0, =0xC0 |			/* tag RAM */ \
+	         0x4 |			/* data RAM */ \
+	         1 << 24 |		/* disable write allocate delay */ \
+	         1 << 23 |		/* disable write allocate combine */ \
+	         1 << 22		/* disable write allocate */
 
 #if defined(CONFIG_MX51)
-	ldr r1, =0x0
-	ldr r3, [r1, #ROM_SI_REV]
+	ldr r3, [r4, #ROM_SI_REV]
 	cmp r3, #0x10
 
 	/* disable write combine for TO 2 and lower revs */
@@ -84,8 +85,7 @@
 	ldr r1, =0x00000203
 	str r1, [r0, #0x40]
 
-	ldr r1, =0x0
-	str r1, [r0, #0x44]
+	str r4, [r0, #0x44]
 
 	ldr r1, =0x00120125
 	str r1, [r0, #0x9C]
@@ -98,20 +98,29 @@
 
 .macro setup_pll pll, freq
 	ldr r0, =\pll
+	adr r2, W_DP_\freq
+	bl setup_pll_func
+.endm
+
+#define W_DP_OP		0
+#define W_DP_MFD	4
+#define W_DP_MFN	8
+
+setup_pll_func:
 	ldr r1, =0x00001232
 	str r1, [r0, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */
 	mov r1, #0x2
 	str r1, [r0, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */
 
-	ldr r1, W_DP_OP_\freq
+	ldr r1, [r2, #W_DP_OP]
 	str r1, [r0, #PLL_DP_OP]
 	str r1, [r0, #PLL_DP_HFS_OP]
 
-	ldr r1,	W_DP_MFD_\freq
+	ldr r1, [r2, #W_DP_MFD]
 	str r1, [r0, #PLL_DP_MFD]
 	str r1, [r0, #PLL_DP_HFS_MFD]
 
-	ldr r1,  W_DP_MFN_\freq
+	ldr r1, [r2, #W_DP_MFN]
 	str r1, [r0, #PLL_DP_MFN]
 	str r1, [r0, #PLL_DP_HFS_MFN]
 
@@ -120,12 +129,13 @@
 1:	ldr r1, [r0, #PLL_DP_CTL]
 	ands r1, r1, #0x1
 	beq 1b
-.endm
+
+	/* r10 saved upper lr */
+	mov pc, lr
 
 .macro setup_pll_errata pll, freq
 	ldr r2, =\pll
-	mov r1, #0x0
-	str r1, [r2, #PLL_DP_CONFIG] /* Disable auto-restart AREN bit */
+	str r4, [r2, #PLL_DP_CONFIG] /* Disable auto-restart AREN bit */
 	ldr r1, =0x00001236
 	str r1, [r2, #PLL_DP_CTL]    /* Restart PLL with PLM=1 */
 1:	ldr r1, [r2, #PLL_DP_CTL]    /* Wait for lock */
@@ -158,10 +168,9 @@
 	/* Gate of clocks to the peripherals first */
 	ldr r1, =0x3FFFFFFF
 	str r1, [r0, #CLKCTL_CCGR0]
-	ldr r1, =0x0
-	str r1, [r0, #CLKCTL_CCGR1]
-	str r1, [r0, #CLKCTL_CCGR2]
-	str r1, [r0, #CLKCTL_CCGR3]
+	str r4, [r0, #CLKCTL_CCGR1]
+	str r4, [r0, #CLKCTL_CCGR2]
+	str r4, [r0, #CLKCTL_CCGR3]
 
 	ldr r1, =0x00030000
 	str r1, [r0, #CLKCTL_CCGR4]
@@ -184,11 +193,10 @@
 #else
 	ldr r1, =0x3FFFFFFF
 	str r1, [r0, #CLKCTL_CCGR0]
-	ldr r1, =0x0
-	str r1, [r0, #CLKCTL_CCGR1]
-	str r1, [r0, #CLKCTL_CCGR2]
-	str r1, [r0, #CLKCTL_CCGR3]
-	str r1, [r0, #CLKCTL_CCGR7]
+	str r4, [r0, #CLKCTL_CCGR1]
+	str r4, [r0, #CLKCTL_CCGR2]
+	str r4, [r0, #CLKCTL_CCGR3]
+	str r4, [r0, #CLKCTL_CCGR7]
 
 	ldr r1, =0x00030000
 	str r1, [r0, #CLKCTL_CCGR4]
@@ -214,8 +222,7 @@
 
 	/* Switch peripheral to PLL 3 */
 	ldr r0, =CCM_BASE_ADDR
-	ldr r1, =0x000010C0
-	orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
+	ldr r1, =0x000010C0 | CONFIG_SYS_DDR_CLKSEL
 	str r1, [r0, #CLKCTL_CBCMR]
 	ldr r1, =0x13239145
 	str r1, [r0, #CLKCTL_CBCDR]
@@ -225,8 +232,7 @@
 	ldr r0, =CCM_BASE_ADDR
 	ldr r1, =0x19239145
 	str r1, [r0, #CLKCTL_CBCDR]
-	ldr r1, =0x000020C0
-	orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
+	ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL
 	str r1, [r0, #CLKCTL_CBCMR]
 #endif
 	setup_pll PLL3_BASE_ADDR, 216
@@ -240,8 +246,7 @@
 
 #if defined(CONFIG_MX51)
 	/* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */
-	ldr r1, =0x0
-	ldr r3, [r1, #ROM_SI_REV]
+	ldr r3, [r4, #ROM_SI_REV]
 	cmp r3, #0x10
 	movls r1, #0x1
 	movhi r1, #0
@@ -251,14 +256,12 @@
 	str r1, [r0, #CLKCTL_CACRR]
 
 	/* Switch ARM back to PLL 1 */
-	mov r1, #0
-	str r1, [r0, #CLKCTL_CCSR]
+	str r4, [r0, #CLKCTL_CCSR]
 
 #if defined(CONFIG_MX51)
 	/* setup the rest */
 	/* Use lp_apm (24MHz) source for perclk */
-	ldr r1, =0x000020C2
-	orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
+	ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL
 	str r1, [r0, #CLKCTL_CBCMR]
 	/* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */
 	ldr r1, =CONFIG_SYS_CLKTL_CBCDR
@@ -289,7 +292,6 @@
 	ldr r0, =CCM_BASE_ADDR
 	ldr r1, =0x00808145
 	orr r1, r1, #2 << 10
-	orr r1, r1, #0 << 16
 	orr r1, r1, #1 << 19
 	str r1, [r0, #CLKCTL_CBCDR]
 
@@ -310,8 +312,7 @@
 	cmp r1, #0x0
 	bne 1b
 
-	mov r1, #0x0
-	str r1, [r0, #CLKCTL_CCDR]
+	str r4, [r0, #CLKCTL_CCDR]
 
 	/* for cko - for ARM div by 8 */
 	mov r1, #0x000A0000
@@ -325,9 +326,10 @@
 	strh r1, [r0]
 .endm
 
-.section ".text.init", "x"
-
 ENTRY(lowlevel_init)
+	mov r10, lr
+	mov r4, #0	/* Fix R4 to 0 */
+
 #if defined(CONFIG_MX51)
 	ldr r0, =GPIO1_BASE_ADDR
 	ldr r1, [r0, #0x0]
@@ -346,21 +348,25 @@ ENTRY(lowlevel_init)
 
 	init_clock
 
-	/* r12 saved upper lr*/
-	mov pc,lr
+	mov pc, r10
 ENDPROC(lowlevel_init)
 
 /* Board level setting value */
-W_DP_OP_864:		.word DP_OP_864
-W_DP_MFD_864:		.word DP_MFD_864
-W_DP_MFN_864:		.word DP_MFN_864
+#if defined(CONFIG_MX51_PLL_ERRATA)
+W_DP_864:		.word DP_OP_864
+			.word DP_MFD_864
+			.word DP_MFN_864
 W_DP_MFN_800_DIT:	.word DP_MFN_800_DIT
-W_DP_OP_800:		.word DP_OP_800
-W_DP_MFD_800:		.word DP_MFD_800
-W_DP_MFN_800:		.word DP_MFN_800
-W_DP_OP_665:		.word DP_OP_665
-W_DP_MFD_665:		.word DP_MFD_665
-W_DP_MFN_665:		.word DP_MFN_665
-W_DP_OP_216:		.word DP_OP_216
-W_DP_MFD_216:		.word DP_MFD_216
-W_DP_MFN_216:		.word DP_MFN_216
+#else
+W_DP_800:		.word DP_OP_800
+			.word DP_MFD_800
+			.word DP_MFN_800
+#endif
+#if defined(CONFIG_MX51)
+W_DP_665:		.word DP_OP_665
+			.word DP_MFD_665
+			.word DP_MFN_665
+#endif
+W_DP_216:		.word DP_OP_216
+			.word DP_MFD_216
+			.word DP_MFN_216