mpc83xx: set 64BIT_VSPRINTF for boards using nand_util

When enabling NAND support for a board, one must also define
CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
for correct output.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Cc: Dave Liu <daveliu@freescale.com>
Cc: Ron Madrid <ron_madrid@sbcglobal.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>

include/configs/MPC8313ERDB.h

@@ -236,6 +236,7 @@
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000

include/configs/MPC8315ERDB.h

@@ -226,6 +226,7 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE	1
 #define CONFIG_CMD_NAND			1
 #define CONFIG_NAND_FSL_ELBC		1
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_BR1_PRELIM	( CONFIG_SYS_NAND_BASE \
 				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \

include/configs/MPC8360ERDK.h

@@ -212,6 +212,7 @@
 #define CONFIG_NAND_FSL_UPM	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000001b /* Access window size 4K */

include/configs/SIMPC8313.h

@@ -131,6 +131,7 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 		1
 #define CONFIG_NAND_FSL_ELBC		1
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00100000