Merge https://source.denx.de/u-boot/custodians/u-boot-x86

- x86: various improvements made in getting Chromium OS verified boot
  running on top of coreboot, booting into U-Boot.

arch/x86/cpu/coreboot/Kconfig

-if TARGET_COREBOOT
+if VENDOR_COREBOOT
 
 config SYS_COREBOOT
 	bool

arch/x86/cpu/i386/cpu.c

@@ -423,7 +423,7 @@ static void setup_mtrr(void)
 	u64 mtrr_cap;
 
 	/* Configure fixed range MTRRs for some legacy regions */
-	if (!gd->arch.has_mtrr)
+	if (!gd->arch.has_mtrr || !ll_boot_init())
 		return;
 
 	mtrr_cap = native_read_msr(MTRR_CAP_MSR);

arch/x86/dts/chromebook_coral.dts

@@ -10,7 +10,7 @@
 /include/ "rtc.dtsi"
 /include/ "tsc_timer.dtsi"
 
-#ifdef CONFIG_CHROMEOS_VBOOT
+#if defined(CONFIG_CHROMEOS_VBOOT) && defined(CONFIG_ROM_SIZE)
 #include "chromeos-x86.dtsi"
 #include "flashmap-x86-ro.dtsi"
 #include "flashmap-16mb-rw.dtsi"

arch/x86/dts/chromebook_samus.dts

@@ -11,7 +11,7 @@
 
 #include "smbios.dtsi"
 
-#ifdef CONFIG_CHROMEOS_VBOOT
+#if defined(CONFIG_CHROMEOS_VBOOT) && defined(CONFIG_ROM_SIZE)
 #include "chromeos-x86.dtsi"
 #include "flashmap-x86-ro.dtsi"
 #include "flashmap-8mb-rw.dtsi"

arch/x86/include/asm/cb_sysinfo.h

@@ -215,6 +215,22 @@ struct sysinfo_t {
 
 extern struct sysinfo_t lib_sysinfo;
 
+/**
+ * get_coreboot_info() - parse the coreboot sysinfo table
+ *
+ * Parses the coreboot table if found, setting the GD_FLG_SKIP_LL_INIT flag if
+ * so.
+ *
+ * @info: Place to put the parsed information
+ * @return 0 if OK, -ENOENT if no table found
+ */
 int get_coreboot_info(struct sysinfo_t *info);
 
+/**
+ * cb_get_sysinfo() - get a pointer to the parsed coreboot sysinfo
+ *
+ * @return pointer to sysinfo, or NULL if not available
+ */
+const struct sysinfo_t *cb_get_sysinfo(void);
+
 #endif

arch/x86/include/asm/mp.h

@@ -10,18 +10,22 @@
 
 #include <asm/atomic.h>
 #include <asm/cache.h>
+#include <linux/bitops.h>
 
 struct udevice;
 
 enum {
-	/* Indicates that the function should run on all CPUs */
-	MP_SELECT_ALL	= -1,
+	/*
+	 * Indicates that the function should run on all CPUs. We use a large
+	 * number, above the number of real CPUs we expect to find.
+	 */
+	MP_SELECT_ALL	= BIT(16),
 
 	/* Run on boot CPUs */
-	MP_SELECT_BSP	= -2,
+	MP_SELECT_BSP,
 
 	/* Run on non-boot CPUs */
-	MP_SELECT_APS	= -3,
+	MP_SELECT_APS,
 };
 
 typedef int (*mp_callback_t)(struct udevice *cpu, void *arg);

arch/x86/lib/init_helpers.c

@@ -18,10 +18,20 @@ int init_cache_f_r(void)
 		 IS_ENABLED(CONFIG_FSP_VERSION2);
 	int ret;
 
-	if (!ll_boot_init())
-		return 0;
-
-	do_mtrr &= !IS_ENABLED(CONFIG_FSP_VERSION1) &&
+	/*
+	 * Supported configurations:
+	 *
+	 * booting from slimbootloader - in that case the MTRRs are already set
+	 *	up
+	 * booting with FSPv1 - MTRRs are already set up
+	 * booting with FSPv2 - MTRRs must be set here
+	 * booting from coreboot - in this case there is no SPL, so we set up
+	 *	the MTRRs here
+	 * Note: if there is an SPL, then it has already set up MTRRs so we
+	 *	don't need to do that here
+	 */
+	do_mtrr &= !IS_ENABLED(CONFIG_SPL) &&
+		!IS_ENABLED(CONFIG_FSP_VERSION1) &&
 		!IS_ENABLED(CONFIG_SYS_SLIMBOOTLOADER);
 
 	if (do_mtrr) {

arch/x86/lib/zimage.c

@@ -313,12 +313,12 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot,
 	int bootproto = get_boot_protocol(hdr, false);
 
 	log_debug("Setup E820 entries\n");
-	if (ll_boot_init()) {
-		setup_base->e820_entries = install_e820_map(
-			ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map);
-	} else if (IS_ENABLED(CONFIG_COREBOOT_SYSINFO)) {
+	if (IS_ENABLED(CONFIG_COREBOOT_SYSINFO)) {
 		setup_base->e820_entries = cb_install_e820_map(
 			ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map);
+	} else {
+		setup_base->e820_entries = install_e820_map(
+			ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map);
 	}
 
 	if (bootproto == 0x0100) {

board/coreboot/coreboot/Kconfig

-if TARGET_COREBOOT
+if VENDOR_COREBOOT
 
 config SYS_BOARD
 	default "coreboot"
@@ -9,9 +9,6 @@ config SYS_VENDOR
 config SYS_SOC
 	default "coreboot"
 
-config SYS_CONFIG_NAME
-	default "coreboot"
-
 config SYS_TEXT_BASE
 	default 0x01110000
 
@@ -31,4 +28,11 @@ config SYS_CAR_SIZE
 	help
 	  This option specifies the board specific Cache-As-RAM (CAR) size.
 
+endif  # CONFIG_VENDOR_COREBOOT
+
+if TARGET_COREBOOT
+
+config SYS_CONFIG_NAME
+	default "coreboot"
+
 endif

board/coreboot/coreboot/coreboot.c

@@ -37,6 +37,7 @@ int show_board_info(void)
 		goto fallback;
 
 	const char *bios_ver = smbios_string(bios, t0->bios_ver);
+	const char *bios_date = smbios_string(bios, t0->bios_release_date);
 	const char *model = smbios_string(system, t1->product_name);
 	const char *manufacturer = smbios_string(system, t1->manufacturer);
 
@@ -46,6 +47,8 @@ int show_board_info(void)
 	printf("Vendor: %s\n", manufacturer);
 	printf("Model: %s\n", model);
 	printf("BIOS Version: %s\n", bios_ver);
+	if (bios_date)
+		printf("BIOS date: %s\n", bios_date);
 
 	return 0;
 

board/google/chromebook_coral/coral.c

@@ -10,17 +10,21 @@
 #include <command.h>
 #include <cros_ec.h>
 #include <dm.h>
+#include <init.h>
 #include <log.h>
 #include <sysinfo.h>
 #include <acpi/acpigen.h>
 #include <asm-generic/gpio.h>
 #include <asm/acpi_nhlt.h>
+#include <asm/cb_sysinfo.h>
 #include <asm/intel_gnvs.h>
 #include <asm/intel_pinctrl.h>
 #include <dm/acpi.h>
 #include <linux/delay.h>
 #include "variant_gpio.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 struct cros_gpio_info {
 	const char *linux_name;
 	enum cros_gpio_t type;
@@ -28,6 +32,30 @@ struct cros_gpio_info {
 	int flags;
 };
 
+int misc_init_f(void)
+{
+	if (!ll_boot_init()) {
+		printf("Running as secondary loader");
+		if (gd->arch.coreboot_table) {
+			int ret;
+
+			printf(" (found coreboot table at %lx)",
+			       gd->arch.coreboot_table);
+
+			ret = get_coreboot_info(&lib_sysinfo);
+			if (ret) {
+				printf("\nFailed to parse coreboot tables (err=%d)\n",
+				       ret);
+				return ret;
+			}
+		}
+
+		printf("\n");
+	}
+
+	return 0;
+}
+
 int arch_misc_init(void)
 {
 	return 0;

doc/board/coreboot/coreboot.rst

@@ -50,3 +50,24 @@ works by using a 32-bit SPL binary to switch to 64-bit for running U-Boot. It
 can be useful for running UEFI applications, for example.
 
 This has only been lightly tested.
+
+
+Memory map
+----------
+
+  ==========  ==================================================================
+     Address  Region at that address
+  ==========  ==================================================================
+    ffffffff  Top of ROM (and last byte of 32-bit address space)
+    7a9fd000  Typical top of memory available to U-Boot
+              (use cbsysinfo to see where memory range 'table' starts)
+    10000000  Memory reserved by coreboot for mapping PCI devices
+              (typical size 2151000, includes framebuffer)
+     1920000  CONFIG_SYS_CAR_ADDR, fake Cache-as-RAM memory, used during startup
+     1110000  CONFIG_SYS_TEXT_BASE (start address of U-Boot code, before reloc)
+      110000  CONFIG_BLOBLIST_ADDR (before being relocated)
+      100000  CONFIG_PRE_CON_BUF_ADDR
+       f0000  ACPI tables set up by U-Boot
+              (typically redirects to 7ab10030 or similar)
+         500  Location of coreboot sysinfo table, used during startup
+  ==========  ==================================================================

doc/chromium/run_vboot.rst

@@ -6,11 +6,15 @@
 Running U-Boot with Chromium OS verified boot
 =============================================
 
+Note: Once you use the source below you can obtain extra documentation with
+'make htmldocs'. See the 'Internal Documentation' link, under
+'Chromium OS-specific doc'.
+
 To obtain::
 
    git clone https://github.com/sjg20/u-boot.git
    cd u-boot
-   git checkout cros-master
+   git checkout cros-2021.04
 
    cd ..
    git clone https://chromium.googlesource.com/chromiumos/platform/vboot_reference
@@ -169,7 +173,8 @@ detect problems that affect the flow or particular vboot features.
 U-Boot without Chromium OS verified boot
 ----------------------------------------
 
-The following script can be used to boot a Chrome OS image on coral::
+The following script can be used to boot a Chrome OS image on coral. It is
+defined as the boot command in mainline::
 
    # Read the image header and obtain the address of the kernel
    # The offset 4f0 is defined by verified boot and may change for other
@@ -195,10 +200,4 @@ The following script can be used to boot a Chrome OS image on coral::
    zboot go
 
 
-TO DO
------
-
-Get the full ACPI tables working with Coral
-
-
 7 October 2018

doc/device-tree-bindings/pci/x86-pci.txt

@@ -20,6 +20,10 @@ For PCI devices the following optional property is available:
 	output to be lost. This should not generally be used in production code,
 	although it is often harmless.
 
+- u-boot,pci-pre-reloc : List of vendor/device IDs to bind before relocation, even
+	if they are not bridges. This is useful if the device is needed (e.g. a
+	UART). The format is 0xvvvvdddd where d is the device ID and v is the
+	vendor ID.
 
 Example:
 
@@ -32,7 +36,8 @@ pci {
 		0x42000000 0x0 0xb0000000 0xb0000000 0 0x10000000
 		0x01000000 0x0 0x1000 0x1000 0 0xefff>;
 	u-boot,skip-auto-config-until-reloc;
-
+	u-boot,pci-pre-reloc = <
+		PCI_VENDEV(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL_UART2)>;
 
 	serial: serial@18,2 {
 		reg = <0x0200c210 0 0 0 0>;

drivers/pci/pci-uclass.c

@@ -21,6 +21,7 @@
 #if defined(CONFIG_X86) && defined(CONFIG_HAVE_FSP)
 #include <asm/fsp/fsp_support.h>
 #endif
+#include <dt-bindings/pci/pci.h>
 #include <linux/delay.h>
 #include "pci_internal.h"
 
@@ -164,7 +165,7 @@ int dm_pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp)
 }
 
 static int pci_device_matches_ids(struct udevice *dev,
-				  struct pci_device_id *ids)
+				  const struct pci_device_id *ids)
 {
 	struct pci_child_plat *pplat;
 	int i;
@@ -181,7 +182,7 @@ static int pci_device_matches_ids(struct udevice *dev,
 	return -EINVAL;
 }
 
-int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids,
+int pci_bus_find_devices(struct udevice *bus, const struct pci_device_id *ids,
 			 int *indexp, struct udevice **devp)
 {
 	struct udevice *dev;
@@ -201,7 +202,7 @@ int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids,
 	return -ENODEV;
 }
 
-int pci_find_device_id(struct pci_device_id *ids, int index,
+int pci_find_device_id(const struct pci_device_id *ids, int index,
 		       struct udevice **devp)
 {
 	struct udevice *bus;
@@ -681,6 +682,34 @@ static bool pci_match_one_id(const struct pci_device_id *id,
 	return false;
 }
 
+/**
+ * pci_need_device_pre_reloc() - Check if a device should be bound
+ *
+ * This checks a list of vendor/device-ID values indicating devices that should
+ * be bound before relocation.
+ *
+ * @bus: Bus to check
+ * @vendor: Vendor ID to check
+ * @device: Device ID to check
+ * @return true if the vendor/device is in the list, false if not
+ */
+static bool pci_need_device_pre_reloc(struct udevice *bus, uint vendor,
+				      uint device)
+{
+	u32 vendev;
+	int index;
+
+	for (index = 0;
+	     !dev_read_u32_index(bus, "u-boot,pci-pre-reloc", index,
+				 &vendev);
+	     index++) {
+		if (vendev == PCI_VENDEV(vendor, device))
+			return true;
+	}
+
+	return false;
+}
+
 /**
  * pci_find_and_bind_driver() - Find and bind the right PCI driver
  *
@@ -769,7 +798,9 @@ static int pci_find_and_bind_driver(struct udevice *parent,
 	 * precious memory space as on some platforms as that space is pretty
 	 * limited (ie: using Cache As RAM).
 	 */
-	if (!(gd->flags & GD_FLG_RELOC) && !bridge)
+	if (!(gd->flags & GD_FLG_RELOC) && !bridge &&
+	    !pci_need_device_pre_reloc(parent, find_id->vendor,
+				       find_id->device))
 		return log_msg_ret("notbr", -EPERM);
 
 	/* Bind a generic driver so that the device can be used */

drivers/spi/ich.c

@@ -114,7 +114,7 @@ static bool ich9_can_do_33mhz(struct udevice *dev)
 	struct ich_spi_priv *priv = dev_get_priv(dev);
 	u32 fdod, speed;
 
-	if (!CONFIG_IS_ENABLED(PCI))
+	if (!CONFIG_IS_ENABLED(PCI) || !priv->pch)
 		return false;
 	/* Observe SPI Descriptor Component Section 0 */
 	dm_pci_write_config32(priv->pch, 0xb0, 0x1000);
@@ -632,7 +632,7 @@ static int ich_spi_get_basics(struct udevice *bus, bool can_probe,
 		if (device_get_uclass_id(pch) != UCLASS_PCH) {
 			uclass_first_device(UCLASS_PCH, &pch);
 			if (!pch)
-				return log_msg_ret("uclass", -EPROTOTYPE);
+				; /* ignore this error since we don't need it */
 		}
 	}
 

drivers/tpm/cr50_i2c.c

@@ -18,8 +18,6 @@
 #include <acpi/acpi_device.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/iomap.h>
-#include <asm/arch/pm.h>
 #include <linux/delay.h>
 #include <dm/acpi.h>
 

include/dt-bindings/pci/pci.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * This header provides common constants for PCI bindings.
+ */
+
+#ifndef _DT_BINDINGS_PCI_PCI_H
+#define _DT_BINDINGS_PCI_PCI_H
+
+/* Encode a vendor and device ID into a single cell */
+#define PCI_VENDEV(v, d)	(((v) << 16) | (d))
+
+#endif /* _DT_BINDINGS_PCI_PCI_H */

include/pci.h

@@ -578,7 +578,6 @@ typedef int pci_dev_t;
 #define PCI_MASK_BUS(bdf)	((bdf) & 0xffff)
 #define PCI_ADD_BUS(bus, devfn)	(((bus) << 16) | (devfn))
 #define PCI_BDF(b, d, f)	((b) << 16 | PCI_DEVFN(d, f))
-#define PCI_VENDEV(v, d)	(((v) << 16) | (d))
 #define PCI_ANY_ID		(~0)
 
 /* Convert from Linux format to U-Boot format */
@@ -1064,7 +1063,7 @@ int pci_get_ff(enum pci_size_t size);
  * @devp:	Returns matching device if found
  * @return 0 if found, -ENODEV if not
  */
-int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids,
+int pci_bus_find_devices(struct udevice *bus, const struct pci_device_id *ids,
 			 int *indexp, struct udevice **devp);
 
 /**
@@ -1076,7 +1075,7 @@ int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids,
  * @devp:	Returns matching device if found
  * @return 0 if found, -ENODEV if not
  */
-int pci_find_device_id(struct pci_device_id *ids, int index,
+int pci_find_device_id(const struct pci_device_id *ids, int index,
 		       struct udevice **devp);
 
 /**

tools/dtoc/dtb_platdata.py

@@ -749,6 +749,15 @@ class DtbPlatdata():
                     break
 
         if node.parent and node.parent.parent:
+            if node.parent not in self._valid_nodes:
+                # This might indicate that the parent node is not in the
+                # SPL/TPL devicetree but the child is. For example if we are
+                # dealing with of-platdata in TPL, the parent has a
+                # u-boot,dm-tpl tag but the child has u-boot,dm-pre-reloc. In
+                # this case the child node exists in TPL but the parent does
+                # not.
+                raise ValueError("Node '%s' requires parent node '%s' but it is not in the valid list" %
+                                 (node.path, node.parent.path))
             self.buf('\t.parent\t\t= DM_DEVICE_REF(%s),\n' %
                      node.parent.var_name)
         if priv_name:

tools/dtoc/test/dtoc_test_noparent.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Test device tree file for dtoc
+ *
+ * Copyright 2017 Google, Inc
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	i2c@0 {
+		compatible = "sandbox,i2c";
+		u-boot,dm-tpl;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spl-test {
+			u-boot,dm-pre-reloc;
+			compatible = "sandbox,spl-test";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pmic@9 {
+				compatible = "sandbox,pmic";
+				u-boot,dm-pre-reloc;
+				reg = <9>;
+				low-power;
+			};
+		};
+	};
+};

tools/dtoc/test_dtoc.py

@@ -1830,3 +1830,13 @@ U_BOOT_DRVINFO(spl_test2) = {
         dtb_file = get_dtb_file('dtoc_test_single_reg.dts')
         output = tools.GetOutputFilename('output')
         self.run_test(['struct'], dtb_file, output)
+
+    def test_missing_parent(self):
+        """Test detection of a parent node with no properties"""
+        dtb_file = get_dtb_file('dtoc_test_noparent.dts', capture_stderr=True)
+        output = tools.GetOutputFilename('output')
+        with self.assertRaises(ValueError) as exc:
+            self.run_test(['device'], dtb_file, output, instantiate=True)
+        self.assertIn("Node '/i2c@0/spl-test/pmic@9' requires parent node "
+                      "'/i2c@0/spl-test' but it is not in the valid list",
+                      str(exc.exception))