提交 d3c65b01 编写于 作者: L Luca Ceresoli 提交者: Wolfgang Denk

net/net.c: cosmetic: fix brace issues

This removes the following checkpatch issues:
 - WARNING: braces {} are not necessary for single statement blocks
 - WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ben Warren <biggerbadderben@gmail.com>
上级 4f63acd0
...@@ -367,9 +367,8 @@ NetLoop(proto_t protocol) ...@@ -367,9 +367,8 @@ NetLoop(proto_t protocol)
*/ */
NetTxPacket = &PktBuf[0] + (PKTALIGN - 1); NetTxPacket = &PktBuf[0] + (PKTALIGN - 1);
NetTxPacket -= (ulong)NetTxPacket % PKTALIGN; NetTxPacket -= (ulong)NetTxPacket % PKTALIGN;
for (i = 0; i < PKTBUFSRX; i++) { for (i = 0; i < PKTBUFSRX; i++)
NetRxPackets[i] = NetTxPacket + (i+1)*PKTSIZE_ALIGN; NetRxPackets[i] = NetTxPacket + (i+1)*PKTSIZE_ALIGN;
}
} }
if (!NetArpWaitTxPacket) { if (!NetArpWaitTxPacket) {
...@@ -491,11 +490,10 @@ restart: ...@@ -491,11 +490,10 @@ restart:
/* /*
* Echo the inverted link state to the fault LED. * Echo the inverted link state to the fault LED.
*/ */
if (miiphy_link(eth_get_dev()->name, CONFIG_SYS_FAULT_MII_ADDR)) { if (miiphy_link(eth_get_dev()->name, CONFIG_SYS_FAULT_MII_ADDR))
status_led_set(STATUS_LED_RED, STATUS_LED_OFF); status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
} else { else
status_led_set(STATUS_LED_RED, STATUS_LED_ON); status_led_set(STATUS_LED_RED, STATUS_LED_ON);
}
#endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */ #endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */
#endif /* CONFIG_MII, ... */ #endif /* CONFIG_MII, ... */
...@@ -1095,9 +1093,8 @@ CDPHandler(const uchar * pkt, unsigned len) ...@@ -1095,9 +1093,8 @@ CDPHandler(const uchar * pkt, unsigned len)
ss = (const ushort *)pkt; ss = (const ushort *)pkt;
type = ntohs(ss[0]); type = ntohs(ss[0]);
tlen = ntohs(ss[1]); tlen = ntohs(ss[1]);
if (tlen > len) { if (tlen > len)
goto pkt_short; goto pkt_short;
}
pkt += tlen; pkt += tlen;
len -= tlen; len -= tlen;
...@@ -1477,26 +1474,20 @@ NetReceive(volatile uchar * inpkt, int len) ...@@ -1477,26 +1474,20 @@ NetReceive(volatile uchar * inpkt, int len)
printf("bad length %d < %d\n", len, ARP_HDR_SIZE); printf("bad length %d < %d\n", len, ARP_HDR_SIZE);
return; return;
} }
if (ntohs(arp->ar_hrd) != ARP_ETHER) { if (ntohs(arp->ar_hrd) != ARP_ETHER)
return; return;
} if (ntohs(arp->ar_pro) != PROT_IP)
if (ntohs(arp->ar_pro) != PROT_IP) {
return; return;
} if (arp->ar_hln != 6)
if (arp->ar_hln != 6) {
return; return;
} if (arp->ar_pln != 4)
if (arp->ar_pln != 4) {
return; return;
}
if (NetOurIP == 0) { if (NetOurIP == 0)
return; return;
}
if (NetReadIP(&arp->ar_data[16]) != NetOurIP) { if (NetReadIP(&arp->ar_data[16]) != NetOurIP)
return; return;
}
switch (ntohs(arp->ar_op)) { switch (ntohs(arp->ar_op)) {
case ARPOP_REQUEST: case ARPOP_REQUEST:
...@@ -1601,13 +1592,11 @@ NetReceive(volatile uchar * inpkt, int len) ...@@ -1601,13 +1592,11 @@ NetReceive(volatile uchar * inpkt, int len)
debug("len=%d, v=%02x\n", len, ip->ip_hl_v & 0xff); debug("len=%d, v=%02x\n", len, ip->ip_hl_v & 0xff);
/* Can't deal with anything except IPv4 */ /* Can't deal with anything except IPv4 */
if ((ip->ip_hl_v & 0xf0) != 0x40) { if ((ip->ip_hl_v & 0xf0) != 0x40)
return; return;
}
/* Can't deal with IP options (headers != 20 bytes) */ /* Can't deal with IP options (headers != 20 bytes) */
if ((ip->ip_hl_v & 0x0f) > 0x05) { if ((ip->ip_hl_v & 0x0f) > 0x05)
return; return;
}
/* Check the Checksum of the header */ /* Check the Checksum of the header */
if (!NetCksumOk((uchar *)ip, IP_HDR_SIZE_NO_UDP / 2)) { if (!NetCksumOk((uchar *)ip, IP_HDR_SIZE_NO_UDP / 2)) {
puts("checksum bad\n"); puts("checksum bad\n");
...@@ -1950,9 +1939,8 @@ void copy_filename(char *dst, const char *src, int size) ...@@ -1950,9 +1939,8 @@ void copy_filename(char *dst, const char *src, int size)
--size; --size;
} }
while ((--size > 0) && *src && (*src != '"')) { while ((--size > 0) && *src && (*src != '"'))
*dst++ = *src++; *dst++ = *src++;
}
*dst = '\0'; *dst = '\0';
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册