usb: s3c-otg: Split out PHY control

Split the Samsung specific PHY control into a separate file
and compile this into the S3C OTG driver only if used on a
Samsung system.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Vince Bridgers <vbridger@altera.com>
Acked-by: NPavel Machek <pavel@denx.de>
Cc: Stefan Roese <sr@denx.de>
Reviewed-by: NLukasz Majewski <l.majewski@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>

drivers/usb/gadget/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
 ifdef CONFIG_USB_GADGET
 obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
 obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
+obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o
 obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
 obj-$(CONFIG_CI_UDC)	+= ci_udc.o
 obj-$(CONFIG_THOR_FUNCTION) += f_thor.o

drivers/usb/gadget/s3c_udc_otg.c

@@ -151,68 +151,8 @@ bool dfu_usb_get_reset(void)
 	return !!(readl(&reg->gintsts) & INT_RESET);
 }
 
-void otg_phy_init(struct s3c_udc *dev)
-{
-	unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
-	struct s3c_usbotg_phy *phy =
-		(struct s3c_usbotg_phy *)dev->pdata->regs_phy;
-
-	dev->pdata->phy_control(1);
-
-	/*USB PHY0 Enable */
-	printf("USB PHY0 Enable\n");
-
-	/* Enable PHY */
-	writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl);
-
-	if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */
-		writel((readl(&phy->phypwr)
-			&~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN)
-			&~FORCE_SUSPEND_0), &phy->phypwr);
-	else /* C110 GONI */
-		writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
-			&~FORCE_SUSPEND_0), &phy->phypwr);
-
-	if (s5p_cpu_id == 0x4412)
-		writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
-			EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
-		       &phy->phyclk); /* PLL 24Mhz */
-	else
-		writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
-		       CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
-
-	writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
-	       | PHY_SW_RST0, &phy->rstcon);
-	udelay(10);
-	writel(readl(&phy->rstcon)
-	       &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon);
-	udelay(10);
-}
-
-void otg_phy_off(struct s3c_udc *dev)
-{
-	unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
-	struct s3c_usbotg_phy *phy =
-		(struct s3c_usbotg_phy *)dev->pdata->regs_phy;
-
-	/* reset controller just in case */
-	writel(PHY_SW_RST0, &phy->rstcon);
-	udelay(20);
-	writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon);
-	udelay(20);
-
-	writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN
-	       | FORCE_SUSPEND_0, &phy->phypwr);
-
-	writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl);
-
-	writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)),
-	      &phy->phyclk);
-
-	udelay(10000);
-
-	dev->pdata->phy_control(0);
-}
+__weak void otg_phy_init(struct s3c_udc *dev) {}
+__weak void otg_phy_off(struct s3c_udc *dev) {}
 
 /***********************************************************/
 

drivers/usb/gadget/s3c_udc_otg_phy.c

+/*
+ * drivers/usb/gadget/s3c_udc_otg.c
+ * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers
+ *
+ * Copyright (C) 2008 for Samsung Electronics
+ *
+ * BSP Support for Samsung's UDC driver
+ * available at:
+ * git://git.kernel.org/pub/scm/linux/kernel/git/kki_ap/linux-2.6-samsung.git
+ *
+ * State machine bugfixes:
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Ported to u-boot:
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ * Lukasz Majewski <l.majewski@samsumg.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <linux/list.h>
+#include <malloc.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <asm/io.h>
+
+#include <asm/mach-types.h>
+
+#include "regs-otg.h"
+#include <usb/lin_gadget_compat.h>
+
+#include <usb/s3c_udc.h>
+
+void otg_phy_init(struct s3c_udc *dev)
+{
+	unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
+	struct s3c_usbotg_phy *phy =
+		(struct s3c_usbotg_phy *)dev->pdata->regs_phy;
+
+	dev->pdata->phy_control(1);
+
+	/* USB PHY0 Enable */
+	printf("USB PHY0 Enable\n");
+
+	/* Enable PHY */
+	writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl);
+
+	if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */
+		writel((readl(&phy->phypwr)
+			&~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN)
+			&~FORCE_SUSPEND_0), &phy->phypwr);
+	else /* C110 GONI */
+		writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
+			&~FORCE_SUSPEND_0), &phy->phypwr);
+
+	if (s5p_cpu_id == 0x4412)
+		writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
+			EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
+		       &phy->phyclk); /* PLL 24Mhz */
+	else
+		writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
+		       CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
+
+	writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
+	       | PHY_SW_RST0, &phy->rstcon);
+	udelay(10);
+	writel(readl(&phy->rstcon)
+	       &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon);
+	udelay(10);
+}
+
+void otg_phy_off(struct s3c_udc *dev)
+{
+	unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
+	struct s3c_usbotg_phy *phy =
+		(struct s3c_usbotg_phy *)dev->pdata->regs_phy;
+
+	/* reset controller just in case */
+	writel(PHY_SW_RST0, &phy->rstcon);
+	udelay(20);
+	writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon);
+	udelay(20);
+
+	writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN
+	       | FORCE_SUSPEND_0, &phy->phypwr);
+
+	writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl);
+
+	writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)),
+	      &phy->phyclk);
+
+	udelay(10000);
+
+	dev->pdata->phy_control(0);
+}

include/configs/exynos4-common.h

@@ -59,6 +59,7 @@
 
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 

include/configs/s5p_goni.h

@@ -281,6 +281,7 @@
 #define CONFIG_SYS_MAX_I2C_BUS	7
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_CMD_USB_MASS_STORAGE

include/configs/s5pc210_universal.h

@@ -181,6 +181,7 @@
 
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
 
 /*

include/configs/smdkv310.h

@@ -14,6 +14,7 @@
 #undef CONFIG_BOARD_COMMON
 #undef CONFIG_USB_GADGET
 #undef CONFIG_USB_GADGET_S3C_UDC_OTG
+#undef CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
 #undef CONFIG_CMD_USB_MASS_STORAGE
 #undef CONFIG_REVISION_TAG
 #undef CONFIG_CMD_THOR_DOWNLOAD