ARM: zynq: Run distribution boot commands first

This patch is doing two things.
1. Exchanging order of boot commands. distro_bootcmd is run first
followed by Xilinx boot command.
2. Remove CONFIG_BOOTCOMMAND from configs (and follow mainline) by
creating Xilinx distribution bootcommand and wiring it as the last
bootcommand.

QSPI, NAND distribution boot command will be added later.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

configs/syzygy_hub_defconfig

@@ -13,7 +13,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SYS_PROMPT="Zynq> "

configs/topic_miami_defconfig

@@ -11,7 +11,6 @@ CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miami/ps7_regs.txt"
 CONFIG_DEBUG_UART=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=0
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_PROMPT="zynq-uboot> "

configs/topic_miamilite_defconfig

@@ -11,7 +11,6 @@ CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamilite/ps7_regs.txt"
 CONFIG_DEBUG_UART=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=0
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_PROMPT="zynq-uboot> "

configs/topic_miamiplus_defconfig

@@ -11,7 +11,6 @@ CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt"
 CONFIG_DEBUG_UART=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=0
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_PROMPT="zynq-uboot> "

configs/zynq_cc108_defconfig

@@ -11,7 +11,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_PROMPT="Zynq> "

configs/zynq_dlc20_rev1_0_defconfig

@@ -12,7 +12,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y

configs/zynq_microzed_defconfig

@@ -8,7 +8,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y

configs/zynq_minized_defconfig

@@ -10,7 +10,6 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SYS_PROMPT="Zynq> "

configs/zynq_picozed_defconfig

@@ -4,7 +4,6 @@ CONFIG_SYS_TEXT_BASE=0x4000000
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SYS_PROMPT="Zynq> "

configs/zynq_z_turn_defconfig

@@ -11,7 +11,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y

configs/zynq_zc702_defconfig

@@ -13,7 +13,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y

configs/zynq_zc706_defconfig

@@ -15,7 +15,6 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_FIT_PRINT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_FPGA_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y

configs/zynq_zc770_xm010_defconfig

@@ -12,7 +12,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y

configs/zynq_zc770_xm011_defconfig

@@ -13,7 +13,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SYS_PROMPT="Zynq> "

configs/zynq_zc770_xm011_x16_defconfig

@@ -13,7 +13,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SYS_PROMPT="Zynq> "

configs/zynq_zc770_xm012_defconfig

@@ -10,7 +10,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SYS_PROMPT="Zynq> "

configs/zynq_zc770_xm013_defconfig

@@ -10,7 +10,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y

configs/zynq_zed_defconfig

@@ -11,7 +11,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y

configs/zynq_zybo_defconfig

@@ -11,7 +11,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y

configs/zynq_zybo_z7_defconfig

@@ -11,7 +11,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y

include/configs/zynq-common.h

@@ -153,11 +153,18 @@
 #define BOOT_TARGET_DEVICES_DHCP(func)
 #endif
 
+#define BOOTENV_DEV_XILINX(devtypeu, devtypel, instance) \
+	"bootcmd_xilinx=run $modeboot\0"
+
+#define BOOTENV_DEV_NAME_XILINX(devtypeu, devtypel, instance) \
+	"xilinx "
+
 #define BOOT_TARGET_DEVICES(func) \
 	BOOT_TARGET_DEVICES_MMC(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
 	BOOT_TARGET_DEVICES_PXE(func) \
-	BOOT_TARGET_DEVICES_DHCP(func)
+	BOOT_TARGET_DEVICES_DHCP(func) \
+	func(XILINX, xilinx, na)
 
 #include <config_distro_bootcmd.h>
 #endif /* CONFIG_SPL_BUILD */