arm: dts: ls1028a: disable the PCIe controller by default

Disable the PCIe controllers by default, just like in the linux device
tree. But there is one catch, for linux they are enabled in-place by the
bootloader. Obviously, this doesn't work for the bootloader. Thus we
explicitly enable the controllers in the -u-boot.dtsi files.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi

@@ -297,6 +297,19 @@
 	u-boot,dm-pre-reloc;
 };
 
+/*
+ * u-boot will enable the device in the linux device tree in place. Because
+ * we are using the linux device tree, we have to enable the PCI controller
+ * ourselves.
+ */
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
 &soc {
 	u-boot,dm-pre-reloc;
 };

arch/arm/dts/fsl-ls1028a-qds.dtsi

@@ -240,6 +240,14 @@
 	status = "okay";
 };
 
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
 &usb0 {
 	status = "okay";
 };

arch/arm/dts/fsl-ls1028a-rdb.dts

@@ -122,6 +122,14 @@
 	status = "okay";
 };
 
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
 &usb0 {
 	status = "okay";
 };

arch/arm/dts/fsl-ls1028a.dtsi

@@ -354,6 +354,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			status = "disabled";
 		};
 
 		pcie2: pcie@3500000 {
@@ -367,6 +368,7 @@
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			status = "disabled";
 		};
 
 		cluster1_core0_watchdog: wdt@c000000 {