提交 ccea8003 编写于 作者: K Kumar Gala 提交者: Tom Rix

ppc/85xx: Introduce low level write_tlb function

Factor out the code we use to actually write a tlb entry.

set_tlb is a logical view of the TLB while write_tlb is a low level
matching the MAS registers.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 0fb37e57
/*
* Copyright 2004, 2007 Freescale Semiconductor.
* Copyright 2004, 2007-2009 Freescale Semiconductor.
* Copyright (C) 2003 Motorola,Inc.
*
* See file CREDITS for list of people who contributed to this
......@@ -820,6 +820,28 @@ in32r:
/*------------------------------------------------------------------------------*/
/*
* void write_tlb(mas0, mas1, mas2, mas3, mas7)
*/
.globl write_tlb
write_tlb:
mtspr MAS0,r3
mtspr MAS1,r4
mtspr MAS2,r5
mtspr MAS3,r6
#ifdef CONFIG_ENABLE_36BIT_PHYS
mtspr MAS7,r7
#endif
li r3,0
#ifdef CONFIG_SYS_BOOK3E_HV
mtspr MAS8,r3
#endif
isync
tlbwe
msync
isync
blr
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
......
/*
* Copyright 2008 Freescale Semiconductor, Inc.
* Copyright 2008-2009 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
......@@ -42,19 +42,9 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn,
_mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
_mas2 = FSL_BOOKE_MAS2(epn, wimge);
_mas3 = FSL_BOOKE_MAS3(rpn, 0, perms);
_mas7 = rpn >> 32;
_mas7 = FSL_BOOKE_MAS7(rpn);
mtspr(MAS0, _mas0);
mtspr(MAS1, _mas1);
mtspr(MAS2, _mas2);
mtspr(MAS3, _mas3);
#ifdef CONFIG_ENABLE_36BIT_PHYS
mtspr(MAS7, _mas7);
#endif
#ifdef CONFIG_SYS_BOOK3E_HV
mtspr(MAS8, 0);
#endif
asm volatile("isync;msync;tlbwe;isync");
write_tlb(_mas0, _mas1, _mas2, _mas3, _mas7);
#ifdef CONFIG_ADDR_MAP
if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
......
......@@ -450,6 +450,8 @@ extern void print_bats(void);
(((epn) & MAS3_RPN) | (wimge))
#define FSL_BOOKE_MAS3(rpn, user, perms) \
(((rpn) & MAS3_RPN) | (user) | (perms))
#define FSL_BOOKE_MAS7(rpn) \
(((u64)(rpn)) >> 32)
#define BOOKE_PAGESZ_1K 0
#define BOOKE_PAGESZ_4K 1
......@@ -480,6 +482,8 @@ extern int find_tlb_idx(void *addr, u8 tlbsel);
extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
extern void write_tlb(u32 _mas0, u32 _mas1, u32 _mas2, u32 _mas3, u32 _mas7);
#define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \
{ .tlb = _tlb, .epn = _epn, .rpn = _rpn, .perms = _perms, \
.wimge = _wimge, .ts = _ts, .esel = _esel, .tsize = _sz, .iprot = _iprot }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册