Merge with /home/sr/git/u-boot/denx

CHANGELOG

@@ -2,6 +2,19 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Fix control-c handing in CONFIG_CMDLINE_EDITING
+  Properly pass break code back from readline.
+  Patch by Roger Blofeld, 31 Jul 2006
+
+* Add commandline history support to all AMCC eval boards
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Add Macronix MXLV320T flash support for AMCC Bamboo
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Change "mii info" to not print an error upon missing PHY at address
+  Patch by Stefan Roese, 07 Aug 2006
+
 * Fix PCI-Express on PPC440SPe rev. A.
 
 * Fix preboot message on TQM85xx after switching to hush parser.

board/amcc/common/flash.c

@@ -76,6 +76,9 @@ void flash_print_info(flash_info_t * info)
 	case FLASH_MAN_SST:
 		printf("SST ");
 		break;
+        case FLASH_MAN_MX:
+		printf ("MACRONIX ");
+		break;
 	default:
 		printf("Unknown Vendor ");
 		break;
@@ -124,6 +127,9 @@ void flash_print_info(flash_info_t * info)
 	case FLASH_STMW320DT:
 		printf ("M29W320DT (32 M, top sector)\n");
 		break;
+	case FLASH_MXLV320T:
+		printf ("MXLV320T (32 Mbit, top sector)\n");
+		break;
 	default:
 		printf("Unknown Chip Type\n");
 		break;
@@ -375,6 +381,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
 	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) {
 		return flash_erase_2(info, s_first, s_last);
 	} else {
@@ -555,6 +562,7 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 {
 	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) {
 		return write_word_2(info, dest, data);
 	} else {
@@ -648,6 +656,9 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
+	case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+		info->flash_id = FLASH_MAN_MX;
+		break;
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
@@ -676,6 +687,12 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 		info->sector_count = 67;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
+	case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+		info->flash_id += FLASH_MXLV320T;
+		info->sector_count = 71;
+		info->size = 0x00400000;
+		break;	/* => 4 MB	*/
+
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		return (0);	/* => no or unknown flash */
@@ -711,6 +728,19 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 			--i;
 			info->start[i] = base;
 		}
+	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) {
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00002000;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000a000;
+		info->start[i--] = base + info->size - 0x0000c000;
+		info->start[i--] = base + info->size - 0x0000e000;
+		info->start[i--] = base + info->size - 0x00010000;
+
+		for (; i >= 0; i--)
+			info->start[i] = base + i * 0x00010000;
 	} else {
 		if (info->flash_id & FLASH_BTYPE) {
 			/* set sector offsets for bottom boot block type        */

common/cmd_mii.c

@@ -117,8 +117,6 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					miiphy_speed (devname, j),
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
-			} else {
-				puts ("Error reading info from the PHY\n");
 			}
 		}
 	} else if (op == 'r') {
@@ -503,8 +501,6 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					miiphy_speed (devname, j),
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
-			} else {
-				puts ("Error reading info from the PHY\n");
 			}
 		}
 	} else if (op[0] == 'r') {

common/main.c

@@ -937,6 +937,7 @@ int readline (const char *const prompt)
 #ifdef CONFIG_CMDLINE_EDITING
 	char *p = console_buffer;
 	unsigned int len=MAX_CMDBUF_SIZE;
+	int rc;
 	static int initted = 0;
 
 	if (!initted) {
@@ -946,8 +947,8 @@ int readline (const char *const prompt)
 
 	puts (prompt);
 
-	cread_line(p, &len);
-	return len;
+	rc = cread_line(p, &len);
+	return rc < 0 ? rc : len;
 #else
 	char   *p = console_buffer;
 	int	n = 0;				/* buffer index		*/

include/configs/bamboo.h

@@ -310,11 +310,11 @@
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
 				CFG_CMD_ASKENV	| \
-				CFG_CMD_EEPROM	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
@@ -358,13 +358,11 @@
 
 #define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_CMDLINE_EDITING
-
-#ifdef CONFIG_CMDLINE_EDITING
-#undef CONFIG_AUTO_COMPLETE
-#else
-#define CONFIG_AUTO_COMPLETE
-#endif
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
 /*-----------------------------------------------------------------------
  * PCI stuff

include/configs/bubinga.h

@@ -200,8 +200,9 @@
 
 #define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 

include/configs/ebony.h

@@ -143,7 +143,13 @@
 #undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES    {0x69}  /* Don't probe these addrs */
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
@@ -205,6 +211,7 @@
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
@@ -243,8 +250,9 @@
 
 #define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 

include/configs/luan.h

@@ -145,6 +145,13 @@
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 	"echo"
@@ -215,6 +222,7 @@
 				CFG_CMD_DHCP		|	\
 				CFG_CMD_DIAG		|	\
 				CFG_CMD_ELF		|	\
+				CFG_CMD_EEPROM		|	\
 				CFG_CMD_I2C		|	\
 				CFG_CMD_IRQ		|	\
 				CFG_CMD_MII		|	\
@@ -253,6 +261,12 @@
 
 #define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------

include/configs/ocotea.h

@@ -158,7 +158,13 @@
 #undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES    {0x69}  /* Don't probe these addrs */
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
@@ -219,6 +225,9 @@
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CONFIG_PHY_RESET        1       /* reset phy upon startup         */
 #define CONFIG_PHY_RESET_DELAY	1000
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
 				CFG_CMD_ASKENV	| \
@@ -226,6 +235,7 @@
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
@@ -264,15 +274,12 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
-
-#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------

include/configs/walnut.h

@@ -90,6 +90,11 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 
+#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
+#define CONFIG_NET_MULTI		/* needed for NetConsole	*/
+
 #define CONFIG_RTC_DS174x	1	/* use DS1743 RTC in Walnut	*/
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
@@ -97,6 +102,7 @@
 				CFG_CMD_DATE	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_ELF	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
@@ -156,16 +162,12 @@
 
 #define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support	*/
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW		1	/* enable loopw command		*/
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
-
-#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
-#define CONFIG_NET_MULTI		/* needed for NetConsole	*/
-
 /*-----------------------------------------------------------------------
  * I2C stuff
  *-----------------------------------------------------------------------
@@ -175,6 +177,13 @@
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------

include/configs/yellowstone.h

@@ -229,6 +229,7 @@
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
@@ -265,6 +266,12 @@
 
 #define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------

include/configs/yosemite.h

@@ -231,6 +231,7 @@
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
@@ -272,6 +273,12 @@
 
 #define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------

include/configs/yucca.h

@@ -223,6 +223,9 @@
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
 
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
+#define CONFIG_NET_MULTI		/* needed for NetConsole	*/
+
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 /*
@@ -248,6 +251,12 @@
 
 #define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/