armv8: ls1043a: Drop macro CONFIG_LS1043A

Use CONFIG_ARCH_LS1043A instead. Signed-off-by: N York Sun <york.sun@nxp.com>

armv8: ls1043a: Drop macro CONFIG_LS1043A
Use CONFIG_ARCH_LS1043A instead. Signed-off-by: N York Sun <york.sun@nxp.com>
c1303bfd · York Sun · 4a3ab193 · c1303bfd · c1303bfd · c1303bfd
7 changed file
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -26,7 +26,7 @@ ifneq ($(CONFIG_ARCH_LS2080A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
 endif

-ifneq ($(CONFIG_LS1043A),)
+ifneq ($(CONFIG_ARCH_LS1043A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
 obj-$(CONFIG_ARMV8_PSCI) += ls1043a_psci.o
 endif

--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -132,7 +132,7 @@
 #define CONFIG_SYS_FSL_PEX_LUT_BE

 /* SoC related */
-#ifdef CONFIG_LS1043A
+#ifdef CONFIG_ARCH_LS1043A
 #define CONFIG_SYS_FMAN_V3
 #define CONFIG_SYS_NUM_FMAN			1
 #define CONFIG_SYS_NUM_FM1_DTSEC		7

--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -88,7 +88,7 @@
 /* For SD boot address and size are assigned in terms of sector
 * offset and no. of sectors respectively.
 */
-#if defined(CONFIG_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
 #define CONFIG_BS_HDR_ADDR_DEVICE	0x00000920
 #else
 #define CONFIG_BS_HDR_ADDR_DEVICE       0x00000900

--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -34,5 +34,5 @@ obj-$(CONFIG_ARCH_T4240) += t4240.o
 obj-$(CONFIG_ARCH_T4160) += t4240.o
 obj-$(CONFIG_ARCH_B4420) += b4860.o
 obj-$(CONFIG_ARCH_B4860) += b4860.o
-obj-$(CONFIG_LS1043A)	+= ls1043.o
+obj-$(CONFIG_ARCH_LS1043A)	+= ls1043.o
 obj-$(CONFIG_ARCH_LS1046A)	+= ls1046.o
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -28,7 +28,6 @@

 #define CONFIG_REMAKE_ELF
 #define CONFIG_FSL_LAYERSCAPE
-#define CONFIG_LS1043A
 #define CONFIG_MP
 #define CONFIG_GICV2


--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -62,7 +62,7 @@ struct fsl_xhci {
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
-#elif defined(CONFIG_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+#elif defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
 #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_XHCI_USB3_ADDR

--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1699,7 +1699,6 @@ CONFIG_LPUART_32B_REG
 CONFIG_LQ038J7DH53
 CONFIG_LS102XA
 CONFIG_LS102XA_STREAM_ID
-CONFIG_LS1043A
 CONFIG_LSCHLV2
 CONFIG_LSXHL
 CONFIG_LUAN