powerpc/mpc8xxx: Remove P1015 and P1016 from CPU list

P1015 is the same as P1011 and P1016 is the same as P1012 from software
point of view. They have different packages but share SVRs.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>

arch/powerpc/cpu/mpc85xx/Makefile

@@ -55,8 +55,6 @@ COBJS-$(CONFIG_P1011)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1012)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1013)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1014)	+= ddr-gen3.o
-COBJS-$(CONFIG_P1015)	+= ddr-gen3.o
-COBJS-$(CONFIG_P1016)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1020)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1021)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1022)	+= ddr-gen3.o
@@ -103,8 +101,6 @@ COBJS-$(CONFIG_P1011)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1012)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1013)	+= p1022_serdes.o
 COBJS-$(CONFIG_P1014)	+= p1010_serdes.o
-COBJS-$(CONFIG_P1015)	+= p1021_serdes.o
-COBJS-$(CONFIG_P1016)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1017)	+= p1023_serdes.o
 COBJS-$(CONFIG_P1020)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1021)	+= p1021_serdes.o

arch/powerpc/cpu/mpc85xx/speed.c

@@ -186,8 +186,7 @@ void get_sys_info (sys_info_t * sysInfo)
 #endif
 
 #ifdef CONFIG_QE
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	sysInfo->freqQE =  sysInfo->freqSystemBus;
 #else
 	qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)

arch/powerpc/cpu/mpc8xxx/cpu.c

@@ -57,8 +57,6 @@ struct cpu_type cpu_type_list [] = {
 	CPU_TYPE_ENTRY(P1012, P1012, 1),
 	CPU_TYPE_ENTRY(P1013, P1013, 1),
 	CPU_TYPE_ENTRY(P1014, P1014, 1),
-	CPU_TYPE_ENTRY(P1015, P1015, 1),
-	CPU_TYPE_ENTRY(P1016, P1016, 1),
 	CPU_TYPE_ENTRY(P1017, P1017, 1),
 	CPU_TYPE_ENTRY(P1020, P1020, 2),
 	CPU_TYPE_ENTRY(P1021, P1021, 2),

arch/powerpc/include/asm/config_mpc85xx.h

@@ -191,33 +191,6 @@
 #define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 
-/* P1015 is single core version of P1024 */
-#elif defined(CONFIG_P1015)
-#define CONFIG_MAX_CPUS			1
-#define CONFIG_SYS_FSL_NUM_LAWS		12
-#define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
-#define CONFIG_TSECV2
-#define CONFIG_FSL_PCIE_DISABLE_ASPM
-#define CONFIG_SYS_FSL_SEC_COMPAT	2
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
-#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-/* P1016 is single core version of P1025 */
-#elif defined(CONFIG_P1016)
-#define CONFIG_MAX_CPUS			1
-#define CONFIG_SYS_FSL_NUM_LAWS		12
-#define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
-#define CONFIG_TSECV2
-#define CONFIG_FSL_PCIE_DISABLE_ASPM
-#define CONFIG_SYS_FSL_SEC_COMPAT	2
-#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-#define QE_MURAM_SIZE			0x6000UL
-#define MAX_QE_RISC			1
-#define QE_NUM_OF_SNUM			28
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
-
 /* P1017 is single core version of P1023 */
 #elif defined(CONFIG_P1017)
 #define CONFIG_MAX_CPUS			1

arch/powerpc/include/asm/immap_85xx.h

@@ -2260,8 +2260,7 @@ typedef struct ccsr_gur {
 	u8	res11a[76];
 	par_io_t qe_par_io[7];
 	u8	res11b[1600];
-#elif defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-      defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#elif defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	u8      res11a[12];
 	u32     iovselsr;
 	u8      res11b[60];

arch/powerpc/include/asm/processor.h

@@ -1075,8 +1075,6 @@
 #define SVR_P1012	0x80E501
 #define SVR_P1013	0x80E700
 #define SVR_P1014	0x80F101
-#define SVR_P1015	0x80E502
-#define SVR_P1016	0x80E503
 #define SVR_P1017	0x80F700
 #define SVR_P1020	0x80E400
 #define SVR_P1021	0x80E401

drivers/qe/uec.c

@@ -580,8 +580,7 @@ static void phy_change(struct eth_device *dev)
 {
 	uec_private_t	*uec = (uec_private_t *)dev->priv;
 
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 	/* QE9 and QE12 need to be set for enabling QE MII managment signals */
@@ -592,8 +591,7 @@ static void phy_change(struct eth_device *dev)
 	/* Update the link, speed, duplex */
 	uec->mii_info->phyinfo->read_status(uec->mii_info);
 
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	/*
 	 * QE12 is muxed with LBCTL, it needs to be released for enabling
 	 * LBCTL signal for LBC usage.
@@ -1208,16 +1206,14 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
 	uec_private_t		*uec;
 	int			err, i;
 	struct phy_info         *curphy;
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
 
 	uec = (uec_private_t *)dev->priv;
 
 	if (uec->the_first_run == 0) {
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	/* QE9 and QE12 need to be set for enabling QE MII managment signals */
 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
@@ -1249,8 +1245,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
 			udelay(100000);
 		} while (1);
 
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 		/* QE12 needs to be released for enabling LBCTL signal*/
 		clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
 #endif