Merge tag 'mmc-2020-6-15' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc

- fsl_esdhc sdr104 and hs200 fix and error path fix
- fsl_esdhc workaround 3.3v io issue
- ca_dw_mmc cleanup
- presidio-asic emmc DT update.

arch/arm/dts/ca-presidio-engboard.dts

@@ -10,11 +10,9 @@
    #size-cells = <1>;
 
 	mmc0: mmc@f4400000 {
-		compatible = "snps,dw-cortina";
+		compatible = "cortina,ca-mmc";
 		reg = <0x0 0xf4400000 0x1000>;
 		bus-width = <4>;
-		io_ds = <0x77>;
-		fifo-mode;
 		sd_dll_ctrl = <0xf43200e8>;
 		io_drv_ctrl = <0xf432004c>;
 	};

drivers/mmc/Kconfig

@@ -727,6 +727,21 @@ config FSL_ESDHC
 	  This selects support for the eSDHC (Enhanced Secure Digital Host
 	  Controller) found on numerous Freescale/NXP SoCs.
 
+config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
+	bool "enable eSDHC workaround for 3.3v IO reliability issue"
+	depends on FSL_ESDHC && DM_MMC
+	default n
+	help
+	  When eSDHC operates at 3.3v, damage can accumulate in an internal
+	  level shifter at a higher than expected rate. The faster the interface
+	  runs, the more damage accumulates. This issue now is found on LX2160A
+	  eSDHC1 for only SD card. The hardware workaround is recommended to use
+	  an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card
+	  side. For boards without hardware workaround, this option could be
+	  enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card.
+	  This option assumes no hotplug, and u-boot has to make all the way to
+	  to linux to use 1.8v UHS-I speed mode if has card.
+
 config FSL_ESDHC_IMX
 	bool "Freescale/NXP i.MX eSDHC controller support"
 	help

drivers/mmc/ca_dw_mmc.c

@@ -19,6 +19,7 @@
 
 #define SD_CLK_SEL_200MHZ (0x2)
 #define SD_CLK_SEL_100MHZ (0x1)
+#define SD_CLK_SEL_50MHZ (0x0)
 
 #define IO_DRV_SD_DS_OFFSET (16)
 #define IO_DRV_SD_DS_MASK   (0xff << IO_DRV_SD_DS_OFFSET)
@@ -44,15 +45,11 @@ static void ca_dwmci_clksel(struct dwmci_host *host)
 	struct ca_dwmmc_priv_data *priv = host->priv;
 	u32 val = readl(priv->sd_dll_reg);
 
-	if (host->bus_hz >= 200000000) {
-		val &= ~SD_CLK_SEL_MASK;
+	val &= ~SD_CLK_SEL_MASK;
+	if (host->bus_hz >= 200000000)
 		val |= SD_CLK_SEL_200MHZ;
-	} else if (host->bus_hz >= 100000000) {
-		val &= ~SD_CLK_SEL_MASK;
+	else if (host->bus_hz >= 100000000)
 		val |= SD_CLK_SEL_100MHZ;
-	} else {
-		val &= ~SD_CLK_SEL_MASK;
-	}
 
 	writel(val, priv->sd_dll_reg);
 }
@@ -77,14 +74,14 @@ unsigned int ca_dwmci_get_mmc_clock(struct dwmci_host *host, uint freq)
 	u8 clk_div;
 
 	switch (sd_clk_sel) {
-	case 2:
-		clk_div = 1;
+	case SD_CLK_SEL_50MHZ:
+		clk_div = 4;
 		break;
-	case 1:
+	case SD_CLK_SEL_100MHZ:
 		clk_div = 2;
 		break;
 	default:
-		clk_div = 4;
+		clk_div = 1;
 	}
 
 	return SD_SCLK_MAX / clk_div / (host->div + 1);
@@ -100,9 +97,6 @@ static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev)
 	host->dev_index = 0;
 
 	host->buswidth = dev_read_u32_default(dev, "bus-width", 1);
-	if (host->buswidth != 1 && host->buswidth != 4)
-		return -EINVAL;
-
 	host->bus_hz = dev_read_u32_default(dev, "max-frequency", 50000000);
 	priv->ds = dev_read_u32_default(dev, "io_ds", 0x33);
 	host->fifo_mode = dev_read_bool(dev, "fifo-mode");
@@ -118,10 +112,8 @@ static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev)
 		return -EINVAL;
 
 	host->ioaddr = dev_read_addr_ptr(dev);
-	if (host->ioaddr == (void *)FDT_ADDR_T_NONE) {
-		printf("DWMMC: base address is invalid\n");
+	if (!host->ioaddr)
 		return -EINVAL;
-	}
 
 	host->priv = priv;
 
@@ -140,10 +132,8 @@ static int ca_dwmmc_probe(struct udevice *dev)
 	memcpy(&ca_dwmci_dm_ops, &dm_dwmci_ops, sizeof(struct dm_mmc_ops));
 
 	dwmci_setup_cfg(&plat->cfg, host, host->bus_hz, MIN_FREQ);
-	if (host->buswidth == 1) {
-		(&plat->cfg)->host_caps &= ~MMC_MODE_8BIT;
-		(&plat->cfg)->host_caps &= ~MMC_MODE_4BIT;
-	}
+	if (host->buswidth == 1)
+		(&plat->cfg)->host_caps &= ~(MMC_MODE_8BIT | MMC_MODE_4BIT);
 
 	host->mmc = &plat->mmc;
 	host->mmc->priv = &priv->host;
@@ -164,7 +154,7 @@ static int ca_dwmmc_bind(struct udevice *dev)
 }
 
 static const struct udevice_id ca_dwmmc_ids[] = {
-	{ .compatible = "snps,dw-cortina" },
+	{ .compatible = "cortina,ca-mmc" },
 	{ }
 };
 

drivers/mmc/fsl_esdhc.c

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
- * Copyright 2019 NXP Semiconductors
+ * Copyright 2019-2020 NXP
  * Andy Fleming
  *
  * Based vaguely on the pxa mmc code:
@@ -630,16 +630,15 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 static int esdhc_getcd_common(struct fsl_esdhc_priv *priv)
 {
 	struct fsl_esdhc *regs = priv->esdhc_regs;
-	int timeout = 1000;
 
 #ifdef CONFIG_ESDHC_DETECT_QUIRK
 	if (CONFIG_ESDHC_DETECT_QUIRK)
 		return 1;
 #endif
-	while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_CINS) && --timeout)
-		udelay(1000);
+	if (esdhc_read32(&regs->prsstat) & PRSSTAT_CINS)
+		return 1;
 
-	return timeout > 0;
+	return 0;
 }
 
 static void fsl_esdhc_get_cfg_common(struct fsl_esdhc_priv *priv,
@@ -724,13 +723,38 @@ __weak int esdhc_status_fixup(void *blob, const char *compat)
 	return 0;
 }
 
+#ifdef CONFIG_FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
+static int fsl_esdhc_get_cd(struct udevice *dev);
+
+static void esdhc_disable_for_no_card(void *blob)
+{
+	struct udevice *dev;
+
+	for (uclass_first_device(UCLASS_MMC, &dev);
+	     dev;
+	     uclass_next_device(&dev)) {
+		char esdhc_path[50];
+
+		if (fsl_esdhc_get_cd(dev))
+			continue;
+
+		snprintf(esdhc_path, sizeof(esdhc_path), "/soc/esdhc@%lx",
+			 (unsigned long)dev_read_addr(dev));
+		do_fixup_by_path(blob, esdhc_path, "status", "disabled",
+				 sizeof("disabled"), 1);
+	}
+}
+#endif
+
 void fdt_fixup_esdhc(void *blob, bd_t *bd)
 {
 	const char *compat = "fsl,esdhc";
 
 	if (esdhc_status_fixup(blob, compat))
 		return;
-
+#ifdef CONFIG_FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
+	esdhc_disable_for_no_card(blob);
+#endif
 	do_fixup_by_compat_u32(blob, compat, "clock-frequency",
 			       gd->arch.sdhc_clk, 1);
 }
@@ -849,6 +873,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
 	fdt_addr_t addr;
 	struct mmc *mmc;
+	int ret;
 
 	addr = dev_read_addr(dev);
 	if (addr == FDT_ADDR_T_NONE)
@@ -882,7 +907,15 @@ static int fsl_esdhc_probe(struct udevice *dev)
 
 	upriv->mmc = mmc;
 
-	return esdhc_init_common(priv, mmc);
+	ret = esdhc_init_common(priv, mmc);
+	if (ret)
+		return ret;
+
+#ifdef CONFIG_FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
+	if (!fsl_esdhc_get_cd(dev))
+		esdhc_setbits32(&priv->esdhc_regs->proctl, PROCTL_VOLT_SEL);
+#endif
+	return 0;
 }
 
 static int fsl_esdhc_get_cd(struct udevice *dev)

drivers/mmc/fsl_esdhc_imx.c

@@ -791,7 +791,7 @@ static int esdhc_set_voltage(struct mmc *mmc)
 	switch (mmc->signal_voltage) {
 	case MMC_SIGNAL_VOLTAGE_330:
 		if (priv->vs18_enable)
-			return -EIO;
+			return -ENOTSUPP;
 #if CONFIG_IS_ENABLED(DM_REGULATOR)
 		if (!IS_ERR_OR_NULL(priv->vqmmc_dev)) {
 			ret = regulator_set_value(priv->vqmmc_dev, 3300000);
@@ -972,7 +972,8 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 	if (priv->signal_voltage != mmc->signal_voltage) {
 		ret = esdhc_set_voltage(mmc);
 		if (ret) {
-			printf("esdhc_set_voltage error %d\n", ret);
+			if (ret != -ENOTSUPP)
+				printf("esdhc_set_voltage error %d\n", ret);
 			return ret;
 		}
 	}
@@ -1455,6 +1456,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	if (ret) {
 		dev_dbg(dev, "no vqmmc-supply\n");
 	} else {
+		priv->vqmmc_dev = vqmmc_dev;
 		ret = regulator_set_enable(vqmmc_dev, true);
 		if (ret) {
 			dev_err(dev, "fail to enable vqmmc-supply\n");

include/fsl_esdhc.h

@@ -4,6 +4,7 @@
  *-------------------------------------------------------------------
  *
  * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc
+ * Copyright 2020 NXP
  */
 
 #ifndef  __FSL_ESDHC_H__
@@ -98,6 +99,7 @@
 #define PROCTL_DTW_4		0x00000002
 #define PROCTL_DTW_8		0x00000004
 #define PROCTL_D3CD		0x00000008
+#define PROCTL_VOLT_SEL		0x00000400
 
 #define CMDARG			0x0002e008