x86: apl: Fix save/restore of ITSS priorities

The FSP-S changes the ITSS priorities. The code that tries to save it
before running FSP-S and restore it afterwards does not work as U-Boot
relocates in between the save and restore. This means that the driver
data saved before relocation is lost and the new driver just sees zeroes.

Fix this by allocating space in the relocated memory for the ITSS data.
Save it there and access it from the driver after relocation.

This fixes interrupt handling on coral.

Also drop the log_msg_ret() in irq_first_device_type() since this function
can be called speculatively in places where we are not sure if there is
an interrupt controller of that type. The resulting log errors are
confusing when there is no error.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NWolfgang Wallner <wolfgang.wallner@br-automation.com>

arch/x86/cpu/apollolake/fsp_s.c

@@ -160,11 +160,6 @@ int arch_fsps_preinit(void)
 	ret = irq_first_device_type(X86_IRQT_ITSS, &itss);
 	if (ret)
 		return log_msg_ret("no itss", ret);
-	/*
-	 * Snapshot the current GPIO IRQ polarities. FSP is setting a default
-	 * policy that doesn't honour boards' requirements
-	 */
-	irq_snapshot_polarities(itss);
 
 	/*
 	 * Clear the GPI interrupt status and enable registers. These
@@ -203,7 +198,11 @@ int arch_fsp_init_r(void)
 	ret = irq_first_device_type(X86_IRQT_ITSS, &itss);
 	if (ret)
 		return log_msg_ret("no itss", ret);
-	/* Restore GPIO IRQ polarities back to previous settings */
+
+	/*
+	 * Restore GPIO IRQ polarities back to previous settings. This was
+	 * stored in reserve_arch() - see X86_IRQT_ITSS
+	 */
 	irq_restore_polarities(itss);
 
 	/* soc_init() */

arch/x86/cpu/cpu.c

@@ -25,6 +25,7 @@
 #include <dm.h>
 #include <errno.h>
 #include <init.h>
+#include <irq.h>
 #include <log.h>
 #include <malloc.h>
 #include <syscon.h>
@@ -269,9 +270,11 @@ int cpu_init_r(void)
 #ifndef CONFIG_EFI_STUB
 int reserve_arch(void)
 {
-#ifdef CONFIG_ENABLE_MRC_CACHE
-	mrccache_reserve();
-#endif
+	struct udevice *itss;
+	int ret;
+
+	if (IS_ENABLED(CONFIG_ENABLE_MRC_CACHE))
+		mrccache_reserve();
 
 #ifdef CONFIG_SEABIOS
 	high_table_reserve();
@@ -288,6 +291,15 @@ int reserve_arch(void)
 			fsp_save_s3_stack();
 		}
 	}
+	ret = irq_first_device_type(X86_IRQT_ITSS, &itss);
+	if (!ret) {
+		/*
+		 * Snapshot the current GPIO IRQ polarities. FSP-S is about to
+		 * run and will set a default policy that doesn't honour boards'
+		 * requirements
+		 */
+		irq_snapshot_polarities(itss);
+	}
 
 	return 0;
 }

arch/x86/cpu/intel_common/itss.c

@@ -65,14 +65,23 @@ static int snapshot_polarities(struct udevice *dev)
 	int i;
 
 	reg_start = start / IRQS_PER_IPC;
-	reg_end = (end + IRQS_PER_IPC - 1) / IRQS_PER_IPC;
+	reg_end = DIV_ROUND_UP(end, IRQS_PER_IPC);
 
+	log_info("ITSS IRQ Polarities snapshot %p\n", priv->irq_snapshot);
 	for (i = reg_start; i < reg_end; i++) {
 		uint reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i;
 
 		priv->irq_snapshot[i] = pcr_read32(dev, reg);
+		log_debug("   - %d, reg %x: irq_snapshot[i] %x\n", i, reg,
+			  priv->irq_snapshot[i]);
 	}
 
+	/* Save the snapshot for use after relocation */
+	gd->start_addr_sp -= sizeof(*priv);
+	gd->start_addr_sp &= ~0xf;
+	gd->arch.itss_priv = (void *)gd->start_addr_sp;
+	memcpy(gd->arch.itss_priv, priv, sizeof(*priv));
+
 	return 0;
 }
 
@@ -91,16 +100,26 @@ static void show_polarities(struct udevice *dev, const char *msg)
 static int restore_polarities(struct udevice *dev)
 {
 	struct itss_priv *priv = dev_get_priv(dev);
+	struct itss_priv *old_priv;
 	const int start = GPIO_IRQ_START;
 	const int end = GPIO_IRQ_END;
 	int reg_start;
 	int reg_end;
 	int i;
 
+	/* Get the snapshot which was stored by the pre-reloc device */
+	old_priv = gd->arch.itss_priv;
+	if (!old_priv)
+		return log_msg_ret("priv", -EFAULT);
+	memcpy(priv->irq_snapshot, old_priv->irq_snapshot,
+	       sizeof(priv->irq_snapshot));
+
 	show_polarities(dev, "Before");
+	log_info("priv->irq_snapshot %p\n", priv->irq_snapshot);
 
 	reg_start = start / IRQS_PER_IPC;
-	reg_end = (end + IRQS_PER_IPC - 1) / IRQS_PER_IPC;
+	reg_end = DIV_ROUND_UP(end, IRQS_PER_IPC);
+
 
 	for (i = reg_start; i < reg_end; i++) {
 		u32 mask;
@@ -125,6 +144,8 @@ static int restore_polarities(struct udevice *dev)
 		mask &= ~((1U << irq_start) - 1);
 
 		reg = PCR_ITSS_IPC0_CONF + sizeof(u32) * i;
+		log_debug("   - %d, reg %x: mask %x, irq_snapshot[i] %x\n",
+			  i, reg, mask, priv->irq_snapshot[i]);
 		pcr_clrsetbits32(dev, reg, mask, mask & priv->irq_snapshot[i]);
 	}
 

arch/x86/include/asm/global_data.h

@@ -121,6 +121,7 @@ struct arch_global_data {
 #ifdef CONFIG_FSP_VERSION2
 	struct fsp_header *fsp_s_hdr;	/* Pointer to FSP-S header */
 #endif
+	void *itss_priv;		/* Private ITSS data pointer */
 	ulong acpi_start;		/* Start address of ACPI tables */
 };
 

arch/x86/include/asm/itss.h

@@ -16,7 +16,7 @@
 
 #define ITSS_MAX_IRQ	119
 #define IRQS_PER_IPC	32
-#define NUM_IPC_REGS	((ITSS_MAX_IRQ + IRQS_PER_IPC - 1) / IRQS_PER_IPC)
+#define NUM_IPC_REGS	DIV_ROUND_UP(ITSS_MAX_IRQ, IRQS_PER_IPC)
 
 /* Max PXRC registers in ITSS */
 #define MAX_PXRC_CONFIG	(PCR_ITSS_PIRQH_ROUT - PCR_ITSS_PIRQA_ROUT + 1)

drivers/misc/irq-uclass.c

@@ -168,7 +168,7 @@ int irq_first_device_type(enum irq_dev_t type, struct udevice **devp)
 
 	ret = uclass_first_device_drvdata(UCLASS_IRQ, type, devp);
 	if (ret)
-		return log_msg_ret("find", ret);
+		return ret;
 
 	return 0;
 }