pci: fix address range check in __pci_hose_phys_to_bus()

The address range check may overflow if the memory region is located at
the top of the 32-bit address space. This can e.g. be seen on TK1 if
using the E1000 gigabit Ethernet driver where start and size are both
0x80000000 leading to the following messages:

Apalis TK1 # tftpboot $loadaddr test_file
Using e1000#0 device
TFTP from server 192.168.10.1; our IP address is 192.168.10.2
Filename 'test_file'.
Load address: 0x80408000
Loading: pci_hose_phys_to_bus: invalid physical address

This patch fixes this by changing the order of the addition vs.
subtraction in the range check just like already done in
__pci_hose_bus_to_phys().
Reported-by: NIvan Mercier <ivan.mercier@nexvision.fr>
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NSimon Glass <sjg@chromium.org>

drivers/pci/pci_common.c

@@ -268,7 +268,7 @@ int __pci_hose_phys_to_bus(struct pci_controller *hose,
 		bus_addr = phys_addr - res->phys_start + res->bus_start;
 
 		if (bus_addr >= res->bus_start &&
-		    bus_addr < res->bus_start + res->size) {
+		    (bus_addr - res->bus_start) < res->size) {
 			*ba = bus_addr;
 			return 0;
 		}