ARM: uniphier: merge board init functions into board_init()

Currently, the UniPhier platform calls several init functions in the
following order:

  [1] spl_board_init()
  [2] board_early_init_f()
  [3] board_init()
  [4] board_early_init_r()
  [5] board_late_init()

The serial console is not ready at the point of [2], so we want to
avoid using [2] from the view point of debuggability.  Fortunately,
all of the initialization in [2] can be delayed until [3].  I see no
good reason to split into [3] and [4].  So, merge [2] through [4].
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

arch/arm/mach-uniphier/Makefile

@@ -9,11 +9,9 @@ obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/
 
 else
 
-obj-$(CONFIG_BOARD_EARLY_INIT_F) += board_early_init_f.o
 obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
 obj-y += dram_init.o
-obj-y += board_common.o
-obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o
+obj-y += board_init.o
 obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
 obj-y += reset.o
 

arch/arm/mach-uniphier/board_common.c

-/*
- * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-#include "micro-support-card.h"
-
-void uniphier_smp_kick_all_cpus(void);
-
-int board_init(void)
-{
-	led_puts("Uboo");
-#ifdef CONFIG_ARM64
-	uniphier_smp_kick_all_cpus();
-#endif
-	return 0;
-}

arch/arm/mach-uniphier/board_early_init_r.c

-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-#include "micro-support-card.h"
-
-int board_early_init_r(void)
-{
-	support_card_late_init();
-	return 0;
-}

arch/arm/mach-uniphier/board_early_init_f.c → arch/arm/mach-uniphier/board_init.c

 /*
- * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2012-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -45,7 +47,7 @@ static void uniphier_setup_xirq(void)
 	writel(tmp, 0x55000090);
 }
 
-int board_early_init_f(void)
+int board_init(void)
 {
 	led_puts("U0");
 
@@ -122,5 +124,15 @@ int board_early_init_f(void)
 
 	led_puts("U2");
 
+	support_card_late_init();
+
+	led_puts("U3");
+
+#ifdef CONFIG_ARM64
+	uniphier_smp_kick_all_cpus();
+#endif
+
+	led_puts("Uboo");
+
 	return 0;
 }

arch/arm/mach-uniphier/init.h

@@ -115,6 +115,7 @@ void uniphier_pxs2_clk_init(void);
 void uniphier_ld11_clk_init(void);
 void uniphier_ld20_clk_init(void);
 
+void uniphier_smp_kick_all_cpus(void);
 void cci500_init(int nr_slaves);
 
 #define pr_err(fmt, args...)	printf(fmt, ##args)

include/configs/uniphier.h

@@ -31,8 +31,6 @@
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)