i2c: update config using mxc driver to new subsystem

Signed-off-by: NPhilippe Reynes <tremyfr@yahoo.fr>

include/configs/apf27.h

@@ -321,11 +321,12 @@
  */
 
 #ifdef CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		IMX_I2C1_BASE
-#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_MXC_I2C1_SPEED	100000	/* 100 kHz */
+#define CONFIG_SYS_MXC_I2C1_SLAVE	0x7F
+#define CONFIG_SYS_MXC_I2C2_SPEED	100000	/* 100 kHz */
+#define CONFIG_SYS_MXC_I2C2_SLAVE	0x7F
 #define CONFIG_SYS_I2C_NOPROBES		{ }
 
 #ifdef CONFIG_CMD_EEPROM

include/configs/flea3.h

@@ -50,11 +50,10 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C3_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0xfe
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */
+#define CONFIG_SYS_MXC_I2C3_SLAVE	0xfe
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
 

include/configs/imx31_phycore.h

@@ -35,11 +35,10 @@
  * Hardware drivers
  */
 
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C2_BASE_ADDR
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		1 /* I2C2 */
 #define CONFIG_SYS_I2C_CLK_OFFSET	I2C2_CLK_OFFSET
-#define CONFIG_SYS_I2C_SPEED		100000
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE

include/configs/m53evk.h

@@ -161,10 +161,9 @@
  * I2C
  */
 #ifdef CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C2_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		1 /* I2C2 */
 #endif
 
 /*

include/configs/mx25pdk.h

@@ -111,10 +111,9 @@
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		IMX_I2C_BASE
-#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		0 /* I2C1 */
 
 /* RTC */
 #define CONFIG_RTC_IMXDI

include/configs/mx35pdk.h

@@ -40,10 +40,9 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C1_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		0 /* I2C1 */
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
 

include/configs/mx53ard.h

@@ -44,10 +44,9 @@
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C2_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED            100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		1 /* I2C2 */
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC

include/configs/mx53evk.h

@@ -37,10 +37,9 @@
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C2_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED            100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		1 /* I2C2 */
 
 /* PMIC Configs */
 #define CONFIG_POWER

include/configs/mx53loco.h

@@ -71,10 +71,9 @@
 #define CONFIG_MXC_USB_FLAGS	0
 
 /* I2C Configs */
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C1_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		0 /* I2C1 */
 
 /* PMIC Controller */
 #define CONFIG_POWER

include/configs/mx53smd.h

@@ -34,10 +34,9 @@
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C2_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED            100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		1 /* I2C2 */
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC

include/configs/mx6qsabreauto.h

@@ -36,8 +36,8 @@
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
 
 #endif                         /* __MX6QSABREAUTO_CONFIG_H */

include/configs/nitrogen6x.h

@@ -52,8 +52,8 @@
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* OCOTP Configs */

include/configs/titanium.h

@@ -41,8 +41,8 @@
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* MMC Configs */

include/configs/vf610twr.h

@@ -70,10 +70,9 @@
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C0_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		0
 
 #define CONFIG_BOOTDELAY		3
 

include/configs/woodburn_common.h

@@ -45,10 +45,9 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C1_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM		0
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO