configs: omap: Remove dead config CONFIG_SYS_NAND_ADDR

CONFIG_SYS_NAND_ADDR is defined and never referenced. This patch
removes the dead code.
Signed-off-by: NAdam Ford <aford173@gmail.com>

include/configs/am3517_crane.h

@@ -99,8 +99,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access */
 							/* nand at CS0 */

include/configs/am3517_evm.h

@@ -66,8 +66,6 @@
 
 /* Board NAND Info. */
 #ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048

include/configs/cm_t35.h

@@ -89,8 +89,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */

include/configs/cm_t3517.h

@@ -91,8 +91,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */

include/configs/devkit8000.h

@@ -60,9 +60,6 @@
 #define CONFIG_TWL4030_LED		1
 
 /* Board NAND Info */
-
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"

include/configs/mcx.h

@@ -81,8 +81,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access */
 							/* nand at CS0 */

include/configs/omap3_logic.h

@@ -37,8 +37,6 @@
 
 /* Board NAND Info. */
 #ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE /* physical address */
-						  /* to access nand */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	  /* Max number of */
 						  /* NAND devices */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE

include/configs/omap3_overo.h

@@ -51,8 +51,6 @@
 #endif /* CONFIG_NAND */
 
 /* Board NAND Info. */
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 /* Environment information */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \

include/configs/omap3_pandora.h

@@ -44,8 +44,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_SW
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
 #define CONFIG_SYS_NAND_OOBSIZE		64

include/configs/omap3_zoom1.h

@@ -56,8 +56,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */

include/configs/tao3530.h

@@ -70,8 +70,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */

include/configs/tricorder.h

@@ -65,9 +65,6 @@
 #define CONFIG_TWL4030_LED
 
 /* Board NAND Info */
-
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
 							/* to access nand at */
 							/* CS0 */

scripts/config_whitelist.txt

@@ -3567,7 +3567,6 @@ CONFIG_SYS_NAND_ACTL_ALE
 CONFIG_SYS_NAND_ACTL_CLE
 CONFIG_SYS_NAND_ACTL_DELAY
 CONFIG_SYS_NAND_ACTL_NCE
-CONFIG_SYS_NAND_ADDR
 CONFIG_SYS_NAND_ALE
 CONFIG_SYS_NAND_AMASK
 CONFIG_SYS_NAND_BAD_BLOCK_POS