Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 aa697e69 编写于 作者: T Tom Rini
浏览文件
操作

arm: Remove nsa310s board 

These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove it

Cc: Gerald Kerma <dreagle@doukki.net>
Cc: Tony Dinh <mibodhi@gmail.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: NTom Rini <trini@konsulko.com>
上级 dee08b19
隐藏空白更改
内联 并排
Showing with 0 addition and 364 deletion
arch/arm/mach-kirkwood/Kconfig
浏览文件 @ aa697e69
......@@ -53,9 +53,6 @@ config TARGET_GOFLEXHOME
config TARGET_NAS220
bool "BlackArmor NAS220"
config TARGET_NSA310S
bool "Zyxel NSA310S"
config TARGET_SBx81LIFKW
bool "Allied Telesis SBx81GS24/SBx81GT40/SBx81XS6/SBx81XS16"
......@@ -83,7 +80,6 @@ source "board/raidsonic/ib62x0/Kconfig"
source "board/Seagate/dockstar/Kconfig"
source "board/Seagate/goflexhome/Kconfig"
source "board/Seagate/nas220/Kconfig"
source "board/zyxel/nsa310s/Kconfig"
source "board/alliedtelesis/SBx81LIFKW/Kconfig"
source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
......
board/zyxel/nsa310s/Kconfig 已删除 100644 → 0
浏览文件 @ dee08b19
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2015
# Gerald Kerma <dreagle@doukki.net>
# Tony Dinh <mibodhi@gmail.com>
if TARGET_NSA310S
config SYS_BOARD
default "nsa310s"
config SYS_VENDOR
default "zyxel"
config SYS_CONFIG_NAME
default "nsa310s"
endif
board/zyxel/nsa310s/MAINTAINERS 已删除 100644 → 0
浏览文件 @ dee08b19
NSA310S BOARD
M: Gerald Kerma <dreagle@doukki.net>
M: Tony Dinh <mibodhi@gmail.com>
M: Luka Perkov <luka.perkov@sartura.hr>
S: Maintained
F: board/zyxel/nsa310s/
F: include/configs/nsa310s.h
F: configs/nsa310s_defconfig
board/zyxel/nsa310s/Makefile 已删除 100644 → 0
浏览文件 @ dee08b19
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2015
# Gerald Kerma <dreagle@doukki.net>
# Tony Dinh <mibodhi@gmail.com>
obj-y := nsa310s.o
board/zyxel/nsa310s/kwbimage.cfg 已删除 100644 → 0
浏览文件 @ dee08b19
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2015
# Gerald Kerma <dreagle@doukki.net>
# Tony Dinh <mibodhi@gmail.com>
# Refer to doc/README.kwbimage for more details about how-to
# configure and create kirkwood boot images.
#
# Boot Media configurations
BOOT_FROM nand
NAND_ECC_MODE default
NAND_PAGE_SIZE 0x0800
# Configure RGMII-0 interface pad voltage to 1.8V
DATA 0xFFD100e0 0x1b1b1b9b
DATA 0xFFD01400 0x43010c30
DATA 0xFFD01404 0x39543000
DATA 0xFFD01408 0x22125451
DATA 0xFFD0140C 0x00000833
DATA 0xFFD01410 0x0000000C
DATA 0xFFD01414 0x00000000
DATA 0xFFD01418 0x00000000
DATA 0xFFD0141C 0x00000652
DATA 0xFFD01420 0x00000004
DATA 0xFFD01424 0x0000F17F
DATA 0xFFD01428 0x00085520
DATA 0xFFD0147c 0x00008552
DATA 0xFFD01504 0x0FFFFFF1
DATA 0xFFD01508 0x10000000
DATA 0xFFD0150C 0x00000000
DATA 0xFFD01514 0x00000000
DATA 0xFFD0151C 0x00000000
DATA 0xFFD01494 0x00010000
DATA 0xFFD01498 0x00000000
DATA 0xFFD0149C 0x0000E403
DATA 0xFFD01480 0x00000001
DATA 0xFFD20134 0x66666666
DATA 0xFFD20138 0x66666666
DATA 0x0 0x0
board/zyxel/nsa310s/nsa310s.c 已删除 100644 → 0
浏览文件 @ dee08b19
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015
* Gerald Kerma <dreagle@doukki.net>
* Tony Dinh <mibodhi@gmail.com>
*/
#include <common.h>
#include <init.h>
#include <miiphy.h>
#include <net.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <asm/arch/mpp.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include "nsa310s.h"
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
/*
* default gpio configuration
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
mvebu_config_gpio(NSA310S_VAL_LOW, NSA310S_VAL_HIGH,
NSA310S_OE_LOW, NSA310S_OE_HIGH);
/* (all LEDs & power off active high) */
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
MPP3_NF_IO5,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
MPP7_GPO,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP12_GPO,
MPP13_GPIO,
MPP14_GPIO,
MPP15_GPIO,
MPP16_GPIO,
MPP17_GPIO,
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP20_GPIO,
MPP21_GPIO,
MPP22_GPIO,
MPP23_GPIO,
MPP24_GPIO,
MPP25_GPIO,
MPP26_GPIO,
MPP27_GPIO,
MPP28_GPIO,
MPP29_GPIO,
MPP30_GPIO,
MPP31_GPIO,
MPP32_GPIO,
MPP33_GPIO,
MPP34_GPIO,
MPP35_GPIO,
0
};
kirkwood_mpp_conf(kwmpp_config, NULL);
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
return 0;
}
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
u16 reg;
u16 phyaddr;
char *name = "egiga0";
if (miiphy_set_current_dev(name))
return;
/* read PHY dev address */
if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
printf("could not read PHY dev address\n");
return;
}
/* set RGMII delay */
miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, &reg);
reg |= (MV88E1318_RGMII_RX_CTRL | MV88E1318_RGMII_TX_CTRL);
miiphy_write(name, phyaddr, MV88E1318_MAC_CTRL_REG, reg);
miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0);
/* reset PHY */
if (miiphy_reset(name, phyaddr))
return;
/*
* ZyXEL NSA310S uses the 88E1310S Alaska (interface identical to 88E1318)
* and has an MCU attached to the LED[2] via tristate interrupt
*/
/* switch to LED register page */
miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_LED_PG);
/* read out LED polarity register */
miiphy_read(name, phyaddr, MV88E1318_LED_POL_REG, &reg);
/* clear 4, set 5 - LED2 low, tri-state */
reg &= ~(MV88E1318_LED2_4);
reg |= (MV88E1318_LED2_5);
/* write back LED polarity register */
miiphy_write(name, phyaddr, MV88E1318_LED_POL_REG, reg);
/* jump back to page 0, per the PHY chip documenation. */
miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0);
/* set PHY back to auto-negotiation mode */
miiphy_write(name, phyaddr, 0x4, 0x1e1);
miiphy_write(name, phyaddr, 0x9, 0x300);
/* downshift */
miiphy_write(name, phyaddr, 0x10, 0x3860);
miiphy_write(name, phyaddr, 0x0, 0x9140);
}
#endif /* CONFIG_RESET_PHY_R */
board/zyxel/nsa310s/nsa310s.h 已删除 100644 → 0
浏览文件 @ dee08b19
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015
* Gerald Kerma <dreagle@doukki.net>
* Tony Dinh <mibodhi@gmail.com>
*/
#ifndef __NSA310S_H
#define __NSA310S_H
/* low GPIO's */
#define HDD1_GREEN_LED (1 << 16)
#define HDD1_RED_LED (1 << 13)
#define USB_GREEN_LED (1 << 15)
#define USB_POWER (1 << 21)
#define SYS_GREEN_LED (1 << 28)
#define SYS_ORANGE_LED (1 << 29)
#define COPY_GREEN_LED (1 << 22)
#define COPY_RED_LED (1 << 23)
#define PIN_USB_GREEN_LED 15
#define PIN_USB_POWER 21
#define NSA310S_OE_LOW (~(0))
#define NSA310S_VAL_LOW (SYS_GREEN_LED | USB_POWER)
/* high GPIO's */
#define HDD2_GREEN_LED (1 << 2)
#define HDD2_POWER (1 << 1)
#define NSA310S_OE_HIGH (~(0))
#define NSA310S_VAL_HIGH (HDD2_POWER)
/* PHY related */
#define MV88E1318_PGADR_REG 22
#define MV88E1318_MAC_CTRL_PG 2
#define MV88E1318_MAC_CTRL_REG 21
#define MV88E1318_RGMII_TX_CTRL (1 << 4)
#define MV88E1318_RGMII_RX_CTRL (1 << 5)
#define MV88E1318_LED_PG 3
#define MV88E1318_LED_POL_REG 17
#define MV88E1318_LED2_4 (1 << 4)
#define MV88E1318_LED2_5 (1 << 5)
#endif /* __NSA310S_H */
configs/nsa310s_defconfig 已删除 100644 → 0
浏览文件 @ dee08b19
CONFIG_ARM=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_NSA310S=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xE0000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="nsa310s => "
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_IDE=y
CONFIG_CMD_NAND=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),0x100000@0x100000(second_stage_uboot),-@0x200000(root)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MVGBE=y
CONFIG_MII=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
CONFIG_BZIP2=y
CONFIG_OF_LIBFDT=y
include/configs/nsa310s.h 已删除 100644 → 0
浏览文件 @ dee08b19
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015
* Gerald Kerma <dreagle@doukki.net>
* Tony Dinh <mibodhi@gmail.com>
* Luka Perkov <luka.perkov@sartura.hr>
*/
#ifndef _CONFIG_NSA310S_H
#define _CONFIG_NSA310S_H
/* high level configuration options */
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
#define CONFIG_KW88F6192 1 /* SOC Name */
#define CONFIG_KW88F6702 1 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#include "mv-common.h"
/* environment variables configuration */
/* default environment variables */
#define CONFIG_BOOTCOMMAND \
"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
"ubi part root; " \
"ubifsmount ubi:rootfs; " \
"ubifsload 0x800000 ${kernel}; " \
"ubifsload 0x700000 ${fdt}; " \
"ubifsumount; " \
"fdt addr 0x700000; fdt resize; fdt chosen; " \
"bootz 0x800000 - 0x700000"
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"mtdids=nand0=orion_nand\0" \
"mtdparts="CONFIG_MTDPARTS_DEFAULT \
"kernel=/boot/zImage\0" \
"fdt=/boot/nsa310s.dtb\0" \
"bootargs_root=ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw\0"
/* Ethernet driver configuration */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 1
#define CONFIG_RESET_PHY_R
#endif /* CONFIG_CMD_NET */
/* SATA driver configuration */
#ifdef CONFIG_IDE
#define __io
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /* CONFIG_IDE */
/* RTC driver configuration */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */
#endif /* _CONFIG_NSA310S_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或