sunxi: Fix clock_twi_onoff for sun8i-a83

clock_sun8i_a83.c did not contain a clock_twi_onoff implementation
at all, this is fixed by moving the clock_sun6i.c implementation,
which is correct for the a83 too, to a shared location.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NIan Campbell <ijc@hellion.org.uk>

arch/arm/cpu/armv7/sunxi/clock.c

@@ -12,6 +12,7 @@
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/gpio.h>
+#include <asm/arch/prcm.h>
 #include <asm/arch/sys_proto.h>
 
 __weak void clock_init_sec(void)
@@ -28,3 +29,37 @@ int clock_init(void)
 
 	return 0;
 }
+
+/* These functions are shared between various SoCs so put them here. */
+#if defined CONFIG_SUNXI_GEN_SUN6I && !defined CONFIG_MACH_SUN9I
+int clock_twi_onoff(int port, int state)
+{
+	struct sunxi_ccm_reg *const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	if (port == 5) {
+		if (state)
+			prcm_apb0_enable(
+				PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
+		else
+			prcm_apb0_disable(
+				PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
+		return 0;
+	}
+
+	/* set the apb clock gate and reset for twi */
+	if (state) {
+		setbits_le32(&ccm->apb2_gate,
+			     CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port));
+		setbits_le32(&ccm->apb2_reset_cfg,
+			     1 << (APB2_RESET_TWI_SHIFT + port));
+	} else {
+		clrbits_le32(&ccm->apb2_reset_cfg,
+			     1 << (APB2_RESET_TWI_SHIFT + port));
+		clrbits_le32(&ccm->apb2_gate,
+			     CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port));
+	}
+
+	return 0;
+}
+#endif

arch/arm/cpu/armv7/sunxi/clock_sun6i.c

@@ -85,37 +85,6 @@ void clock_init_uart(void)
 #endif
 }
 
-int clock_twi_onoff(int port, int state)
-{
-	struct sunxi_ccm_reg *const ccm =
-		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
-	if (port == 5) {
-		if (state)
-			prcm_apb0_enable(
-				PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
-		else
-			prcm_apb0_disable(
-				PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
-		return 0;
-	}
-
-	/* set the apb clock gate and reset for twi */
-	if (state) {
-		setbits_le32(&ccm->apb2_gate,
-			     CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
-		setbits_le32(&ccm->apb2_reset_cfg,
-			     1 << (APB2_RESET_TWI_SHIFT + port));
-	} else {
-		clrbits_le32(&ccm->apb2_reset_cfg,
-			     1 << (APB2_RESET_TWI_SHIFT + port));
-		clrbits_le32(&ccm->apb2_gate,
-			     CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_SPL_BUILD
 void clock_set_pll1(unsigned int clk)
 {