powerpc/85xx: Introduce CONFIG_SYS_EXTRA_ENV_RELOC

Some systems need to relocate the env_addr pointer early because the
location it points to will get invalidated before env_relocate is
called.  One example is on systems that might use a L2 or L3 cache
in SRAM mode and initialize that cache from SRAM mode back to being
a cache in cpu_init_r.

We set this on the 85xx boards that have support for NAND, SPI, or
SDHC/MMC boot support as they use a secondary cache in SRAM mode and
need the env_addr pointer relocated since we change from SRAM to normal
cache mode in cpu_init_r.

Also removed CONFIG_SYS_SPL as its not used anywhere.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

arch/powerpc/lib/board.c

@@ -645,6 +645,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
 #endif
 
+#ifdef CONFIG_SYS_EXTRA_ENV_RELOC
+	/*
+	 * Some systems need to relocate the env_addr pointer early because the
+	 * location it points to will get invalidated before env_relocate is
+	 * called.  One example is on systems that might use a L2 or L3 cache
+	 * in SRAM mode and initialize that cache from SRAM mode back to being
+	 * a cache in cpu_init_r.
+	 */
+	gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE;
+#endif
+
 #ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
 #endif

include/configs/MPC8536DS.h

@@ -242,9 +242,10 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
-	|| defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \
+    defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
 #else
 #undef CONFIG_SYS_RAMBOOT
 #endif

include/configs/MPC8569MDS.h

@@ -203,8 +203,9 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
+#if defined(CONFIG_RAMBOOT_NAND)
 #define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
 #else
 #undef CONFIG_SYS_RAMBOOT
 #endif

include/configs/P1_P2_RDB.h

@@ -201,9 +201,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
-	|| defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \
+    defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
 #else
 #undef CONFIG_SYS_RAMBOOT
 #endif