提交 a0e80c97 编写于 作者: T Tom Rini

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

...@@ -2185,6 +2185,27 @@ enum { ...@@ -2185,6 +2185,27 @@ enum {
FSO_TOEx_MARK, FSO_TOEx_MARK,
TPU0TO1_MARK, TPU0TO1_MARK,
/* IPSR18 */
USB3_PWEN_IMARK,
AUDIO_CLKOUT2_B_MARK,
SSI_SCK9_B_MARK,
TS_SDEN0_E_MARK,
STP_ISEN_0_E_MARK,
RIF2_D0_B_MARK,
TPU0TO2_MARK,
FMCLK_C_MARK,
FMCLK_D_MARK,
USB3_OVC_IMARK,
AUDIO_CLKOUT3_B_MARK,
SSI_WS9_B_MARK,
TS_SPSYNC0_E_MARK,
STP_ISSYNC_0_E_MARK,
RIF2_D1_B_MARK,
TPU0TO3_MARK,
FMIN_C_MARK,
FMIN_D_MARK,
PINMUX_MARK_END, PINMUX_MARK_END,
}; };
...@@ -3288,6 +3309,27 @@ static struct pinmux_gpio pinmux_gpios[] = { ...@@ -3288,6 +3309,27 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(RIF3_D1_B), GPIO_FN(RIF3_D1_B),
GPIO_FN(FSO_TOEx), GPIO_FN(FSO_TOEx),
GPIO_FN(TPU0TO1), GPIO_FN(TPU0TO1),
/* IPSR18 */
GPIO_IFN(USB3_PWEN),
GPIO_FN(AUDIO_CLKOUT2_B),
GPIO_FN(SSI_SCK9_B),
GPIO_FN(TS_SDEN0_E),
GPIO_FN(STP_ISEN_0_E),
GPIO_FN(RIF2_D0_B),
GPIO_FN(TPU0TO2),
GPIO_FN(FMCLK_C),
GPIO_FN(FMCLK_D),
GPIO_IFN(USB3_OVC),
GPIO_FN(AUDIO_CLKOUT3_B),
GPIO_FN(SSI_WS9_B),
GPIO_FN(TS_SPSYNC0_E),
GPIO_FN(STP_ISSYNC_0_E),
GPIO_FN(RIF2_D1_B),
GPIO_FN(TPU0TO3),
GPIO_FN(FMIN_C),
GPIO_FN(FMIN_D),
}; };
static struct pinmux_cfg_reg pinmux_config_regs[] = { static struct pinmux_cfg_reg pinmux_config_regs[] = {
......
...@@ -116,7 +116,7 @@ int board_init(void) ...@@ -116,7 +116,7 @@ int board_init(void)
/* USB1 pull-up */ /* USB1 pull-up */
setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN); setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
#ifdef CONFIG_RAVB #ifdef CONFIG_RENESAS_RAVB
/* EtherAVB Enable */ /* EtherAVB Enable */
/* GPSR2 */ /* GPSR2 */
gpio_request(GPIO_GFN_AVB_AVTP_CAPTURE_A, NULL); gpio_request(GPIO_GFN_AVB_AVTP_CAPTURE_A, NULL);
...@@ -158,12 +158,7 @@ int board_init(void) ...@@ -158,12 +158,7 @@ int board_init(void)
udelay(1); udelay(1);
#endif #endif
return 0; #ifdef CONFIG_MMC
}
#ifdef CONFIG_SH_SDHI
int board_mmc_init(bd_t *bis)
{
/* SDHI0 */ /* SDHI0 */
gpio_request(GPIO_GFN_SD0_DAT0, NULL); gpio_request(GPIO_GFN_SD0_DAT0, NULL);
gpio_request(GPIO_GFN_SD0_DAT1, NULL); gpio_request(GPIO_GFN_SD0_DAT1, NULL);
...@@ -227,10 +222,10 @@ int board_mmc_init(bd_t *bis) ...@@ -227,10 +222,10 @@ int board_mmc_init(bd_t *bis)
gpio_request(GPIO_GP_3_14, NULL); gpio_request(GPIO_GP_3_14, NULL);
gpio_direction_output(GPIO_GP_3_15, 1); /* power on */ gpio_direction_output(GPIO_GP_3_15, 1); /* power on */
gpio_direction_output(GPIO_GP_3_14, 1); /* 1: 3.3V, 0: 1.8V */ gpio_direction_output(GPIO_GP_3_14, 1); /* 1: 3.3V, 0: 1.8V */
#endif
return 0; return 0;
} }
#endif
int dram_init(void) int dram_init(void)
{ {
......
...@@ -105,7 +105,7 @@ int board_init(void) ...@@ -105,7 +105,7 @@ int board_init(void)
/* USB1 pull-up */ /* USB1 pull-up */
setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN); setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
#ifdef CONFIG_RAVB #ifdef CONFIG_RENESAS_RAVB
/* EtherAVB Enable */ /* EtherAVB Enable */
/* GPSR2 */ /* GPSR2 */
gpio_request(GPIO_GFN_AVB_AVTP_CAPTURE_A, NULL); gpio_request(GPIO_GFN_AVB_AVTP_CAPTURE_A, NULL);
...@@ -137,12 +137,7 @@ int board_init(void) ...@@ -137,12 +137,7 @@ int board_init(void)
udelay(1); udelay(1);
#endif #endif
return 0; #ifdef CONFIG_MMC
}
#ifdef CONFIG_SH_SDHI
int board_mmc_init(bd_t *bis)
{
/* SDHI0 */ /* SDHI0 */
gpio_request(GPIO_GFN_SD0_DAT0, NULL); gpio_request(GPIO_GFN_SD0_DAT0, NULL);
gpio_request(GPIO_GFN_SD0_DAT1, NULL); gpio_request(GPIO_GFN_SD0_DAT1, NULL);
...@@ -179,10 +174,10 @@ int board_mmc_init(bd_t *bis) ...@@ -179,10 +174,10 @@ int board_mmc_init(bd_t *bis)
gpio_request(GPIO_GP_5_9, NULL); gpio_request(GPIO_GP_5_9, NULL);
gpio_direction_output(GPIO_GP_5_3, 0); /* 1: 3.3V, 0: 1.8V */ gpio_direction_output(GPIO_GP_5_3, 0); /* 1: 3.3V, 0: 1.8V */
gpio_direction_output(GPIO_GP_5_9, 0); /* 1: 3.3V, 0: 1.8V */ gpio_direction_output(GPIO_GP_5_9, 0); /* 1: 3.3V, 0: 1.8V */
#endif
return 0; return 0;
} }
#endif
int dram_init(void) int dram_init(void)
{ {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册